As an Amazon Associate I earn from qualifying purchases.
BOSCH #ad - The miter cut calculation has an input measurement from 0-220 degrees. Leg extension, 4 AA 1. 5v batteries. Display: easy-to-read illuminated, rotating flip display.
Memory: this angle finder provides angle memory, to provide the same angle measurement in different areas of the jobsite. Compelte: the bosch gam 220 mf includes a 4-in-1 digital angle finder, hard thermoformed case, 16 in.
Neoteck #ad - It can't hold the Angle Firm Completely! . Will not display a number on lcd, just only Assist You to Judge If It Is Horizontal / Vertical or Not. Backlit lcd display come with backlit led display Which Makes it Possible to Read the Data Clearly, Even under a Low Light Circumstance.
The knob is Just for Loosening and Tightening. With horizontal and vertical bubble level it also can be used like a spirit level, helping you to check and Calibrate NOTE: It is NOT a Digital Level.
General Tools #ad - The toolsmart digital angle finder accurately determines the angle of any corner, easily determine the angle of any corner up to 225 degrees.
Easily send inside and outside angle measurements to your smartphone with one click and quickly figure out compound angles with the ToolSmart App. Ruler and horizontal & vertical bubble levels. Using the toolsmart app, you can also quickly and easily determine the materials and tools you will need to complete your project.
Fdit #ad - Automatically shut off after five minutes to save energy, and with low power alarm. Br>. Large lcd display: easily readable lcd display shows the exact measuring results at once with data holding function, make it much easier for you to read the data.
Br>. Easy to use: large and clear lcd with backlight, keep its normal use on dark. Mechanical lock: keep the angle invariable in the process of line or measure the angle.
GemRed #ad - Digital DisplayEasy to read. No reverse angle/display function. Locking functionfor read it easily, gemred angle finder could be locked at any angle. High accuracyaccuracy of this protractor is ±03 degree.
Notesstainless steel edge is sharp, please be cautious while using and keep it away from children. Scratches on rulers are resulted from touching WITH EACH OTHER. Folded length: about 7.
General Tools #ad - Protractor comes with a large easy-to-read LCD display; never guess or eye ball the angle and length again with one convenient tool. Woodworking tool can be zeroed at any point in the swing; digital measuring stick has a length of 5 inches.
Calculated Industries #ad - 3 degree accuracy. Versatile angle measurement tool doubles as both a digital angle gauge and a protractor for measuring all your workshop angles, molding, squaring frames, general woodworking, baseboard, miters for crown, trim, bevels, setting miter saw blade angles and more.
Measure 360 degrees – pivot allows full rotation in both directions so you can precisely measure inside or outside angles With ease at +/- 0 Large lcd display Digits make it easy to read.
Instantly reset your zero point at any position for relative angles. Lcd display hold lets you freeze a displayed value before moving tool. Comes complete – with protective case, clear American-written, long-life cr2032 3V battery, Manual and Auto-off, large-print user guide and 2-year limited warranty.
BOSCH #ad - Durable: features robust housing with IP54 protection, making the angle finder water and dust resistant. Leg extension, 4 AA 1. 5v batteries. Display: easy-to-read illuminated, rotating flip display for the inclinometer and angle finder.
Memory: this angle finder provides angle memory, to provide the same angle and inclinometer measurements in different areas of the jobsite.
1. BOSCH
#adBosch 4-in-1 Digital Angle Finder GAM 220 MF
#adMemory: this angle finder provides angle memory, to provide the same angle measurement in different areas of the jobsite. Compelte: the bosch gam 220 mf includes a 4-in-1 digital angle finder, hard thermoformed case, 16 in.
More information #ad
Durable: features robust housing with IP54 protection, making the angle finder water and dust resistant. Versatility: the bosch gam 220 mf provides four tools in one including an angle finder, miter calculator, protractor and level.| Brand | BOSCH #ad |
| Manufacturer | Bosch #ad |
| Height | 1.4 Inches |
| Length | 17 Inches |
| Weight | 2.4 Pounds |
| Width | 2.4 Inches |
| Part Number | GAM 220 MF |
| Model | GAM 220 MF |
More information #ad
2. Neoteck
#adNeoteck Aluminum Digital Angle Finder Protractor 225° 16 inch Backlit LCD Digital with Horizontal and Vertical Bubble, Silver
#adThe knob is Just for Loosening and Tightening. With horizontal and vertical bubble level it also can be used like a spirit level, helping you to check and Calibrate NOTE: It is NOT a Digital Level.
More information #ad
Digital angle finder protractor with high accuracy, delicate Design and Modern Appearance, An Interior Designer Should Have One! High accuracy angle range is 0-225°, measuring precision: ±0.5°, increase/Decrease Angle: 01°. Data holdif you want to use data holding function, you need to press the hOLD Button in Red rather than Twist the Knob.| Brand | Neoteck #ad |
| Manufacturer | Neoteck #ad |
| Part Number | NTKTL170 |
| Model | NTKTL170 |
More information #ad
3. General Tools
#adLevel and 10.5-Inch Ruler, Protractor, General Tools TS02 ToolSmart Bluetooth Connected Digital Angle Finder
#adEasily send inside and outside angle measurements to your smartphone with one click and quickly figure out compound angles with the ToolSmart App. Ruler and horizontal & vertical bubble levels. Using the toolsmart app, you can also quickly and easily determine the materials and tools you will need to complete your project.
More information #ad
This next generation miter finder and angle measurement tool also incorporates a 105 in. This digital protractor tool is especially useful for crown moulding and flooring applications to make sure you get perfect cuts every time.| Brand | General Tools #ad |
| Manufacturer | General Tools #ad |
| Height | 12 Inches |
| Length | 0.9 Inches |
| Width | 2 Inches |
| Part Number | TS02 |
| Model | TS02 |
More information #ad
4. True Power
#adAngle Finder & Level 0°-225° #677, 16" Digital Protractor
#adTrue Power #ad - Display reading "Hold" function Illuminated LCD display. Measuring precision: +-05degree Digital Accuracy 01 degree for all ranges. Increase/decrease angle: 01 degree increments Automatically shut off after five minutes. Length: 16" measuring angle range: 0-225 Degree.More information #ad
| Brand | True Power #ad |
| Manufacturer | True Power #ad |
| Height | 1.5 Inches |
| Length | 20.5 Inches |
| Weight | 1 Pounds |
| Width | 4.5 Inches |
| Part Number | 677 |
| Model | 04-0677 |
More information #ad
5. GemRed
#adGemRed 82302 Digital Protractor Angle Finder 270mmAccuracy 0.15 degree
#adGemRed #ad - Measuring range 0°~360°. Accuracy 015°; resolution 005 °. Display always reads upright, no matter which way it is turned. Conversion between absolute measurement and relative measurement. Applied for professional measuring in woodworking, construction etc.More information #ad
High accuracy level bubble for measuring horizontal level easily. Working more than 2000 hours with one piece of CR2032 coin batteryincluded. V-notch end for checking 90° degree quickly. Easy to measure all kinds of angle and draw lines. Easy calibration and Zero setting.| Brand | GemRed #ad |
| Manufacturer | Guilin GemRed Sensor Technology Co., Ltd #ad |
| Part Number | 82302-00-W |
More information #ad
6. Fdit
#ad0-225° Digital Angle Gauge Digital Inclinometer Meter Protractor Angle Finder Ruler Tool with LCD Display & Blue Backlight Vertical Horizontal Dual Spirit Level 16 Inch
#adBr>. Easy to use: large and clear lcd with backlight, keep its normal use on dark. Mechanical lock: keep the angle invariable in the process of line or measure the angle.
More information #ad
Br>. Good helper: this digital angle gauge would be a good helper for woodworkers. Perfect to measure the exact angles such as trays, sloping roofs and handrails during lineation. Br>. Accurate measurement: measuring range is 0-225° vertical and horizontal at a measuring precision of 02°. Br>.| Brand | Fdit #ad |
| Manufacturer | Fdit #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0.02 Pounds |
| Width | 0 Inches |
| Part Number | Fdit0fc2s6upnz |
More information #ad
7. GemRed
#ad7inch/200mm, GemRed Digital Angle Finder Protractor Stainless steel
#adNotesstainless steel edge is sharp, please be cautious while using and keep it away from children. Scratches on rulers are resulted from touching WITH EACH OTHER. Folded length: about 7.
More information #ad
5 inch/220mm. Total length 400mm. It is a good choice for most projects like woodworking, crown molding and daily use. 2 functions' combinationruler and protractor combination for easy measuring inside and outside angles. It may apprear on brand-new product. Durable rulerswell-made stainless steel rulers and laser etched measurements offer clear reading and years' usage.| Brand | GemRed #ad |
| Manufacturer | GemRed #ad |
| Part Number | 82305-200 |
More information #ad
8. General Tools
#ad5-Inch, General Tools 822 Digital Angle Finder Rule
#adMore information #ad
Digital stainless steel ruler and angle finder combo makes precise measurements for easy woodworking. Hinge mechanism on the angle rule allows a full 360-degrees to measure inside outside and reverse angles. Digital protractor has lock and reverse angle functions that make all types of work easy and fast.| Brand | General Tools #ad |
| Manufacturer | General Tools #ad |
| Height | 10.88 Inches |
| Length | 1.13 Inches |
| Weight | 0.2 Pounds |
| Width | 5.38 Inches |
| Part Number | 822 |
| Model | 822 |
| Warranty | 1 year parts |
More information #ad
9. Calculated Industries
#adProtective Case, Calculated Industries 7455 AccuMASTER Digital Protractor Angle Finder Ruler for Crown, Trim, Woodworking | 7 Inch Stainless Steel Blade | Hold and Zero Function | Includes Battery
#adMeasure 360 degrees – pivot allows full rotation in both directions so you can precisely measure inside or outside angles With ease at +/- 0 Large lcd display Digits make it easy to read.
More information #ad
To find relative angle, determine first angle then push the zero button, then measure second angle to see the difference. Easy to read stainless steel rulers have permanently etched markings in 16ths and mm's on one and 32nds and mm's on the other for easier, clearer reading of precision measurements in your favorite units and scale. Instantly reset your zero point at any position for relative angles. Lcd display hold lets you freeze a displayed value before moving tool. Comes complete – with protective case, clear American-written, long-life cr2032 3V battery, Manual and Auto-off, large-print user guide and 2-year limited warranty.
| Brand | Calculated Industries #ad |
| Manufacturer | Calculated Industries #ad |
| Height | 0.75 Inches |
| Length | 8.5 Inches |
| Weight | 0.3 Pounds |
| Width | 1.5 Inches |
| Part Number | 7455 |
| Model | 7455 |
| Warranty | 2-year limited warrannty |
More information #ad
10. BOSCH
#adBosch 5-in-1 Digital Angle Finder and Inclinometer GAM 270 MFL
#adMemory: this angle finder provides angle memory, to provide the same angle and inclinometer measurements in different areas of the jobsite.
More information #ad
Complete: the bosch gam 270 mfl includes a 5-in-1 digital angle finder, hard thermoformed case, 24 in. Versatility: the bosch gam 270 mfl provides five tools in one including a digital angle finder, a miter calculator, an inclinometer, a protractor and level. The miter cut calculation has an input measurement from 0-270 degrees.| Brand | BOSCH #ad |
| Manufacturer | Bosch #ad |
| Height | 1.4 Inches |
| Length | 17 Inches |
| Weight | 2.4 Pounds |
| Width | 2.4 Inches |
| Part Number | GAM 270 MFL |
| Model | GAM 270 MFL |
More information #ad
