Top 10 JACKYLED LED Lights Connector – Track Lighting Connectors

As an Amazon Associate I earn from qualifying purchases.

1. JACKYLED

#ad

L Shape 4-Pin LED Connectors 10-Pack JACKYLED 10mm Wide Right Angle Corner Connectors Solderless Adapter Connector Terminal Extension with 22Pcs Clips for 3528/5050 SMD RGB 4 Conductor LED Light Strips

#ad
JACKYLED #ad - Just slide the light strip under the connector's pins and snap the clip. Dual purposes: this connector kit comes with detachable L sheets and straight couplers, perfect for both 90 degree corner connections and extensions along a straight line.

Go both left and right: no matter in what orders are the RGB+ marked on the connectors, the connection work as long as the + of the light strips on both sides are aligned. You get extra: apart from 10 pieces of l boards and 20 connector clips in this 10-pack, 2 extra couplers are included, as well as detailed instructions both printed and online.

If you need any help when using the connectors, please feel free to contact our online customer service team. Solderless solution: create a quick shunt, solid connection without the hassle of soldering. For all 4 pin light strips: work with any 4-pin 10mm 039in wide smd 3528/5050 multicolor led flexible strip lights, whether they are waterproof ones or non-waterproof lights for indoor use.
BrandJACKYLED #ad
ManufacturerJACKYLED #ad
Height10 Millimeters
Length10 Millimeters
Width10 Millimeters
Part NumberLEDconnecter02
ModelJKLED03

2. JACKYLED

#ad

JACKYLED 10-Pack 5050 3528 RGB LED Light Strip Connectors 4-Pin 10mm Wide Solderless Strip to Strip Jumper Extension Wire Angle Connector for Kitchen Cabinet Bedroom DIY LED Strip Project

#ad
JACKYLED #ad - If you need to solder it with light strip cable, you had better use less tin in order to avoid short circuit. Easy to use: just clasp your prepared led strip section into the led 4 pin connectors to get connected. These led light strips connectors are flexible and durable enough for bending or twisting in any angles without breaking.

Note: these led jumpers are only suitable for 10mm 039in wide 4 pin RGB led light strips. Make sure the strip is properly aligned with the connectormatch the positive terminals. And 2 pcs l-shape corner connectors are included for your varied needs. Feel free to bend it: our 5050 4 pin led connectors with 17 strand tin-plated oxygen-free copper inside each circuit, the wires are thicker than most of the other rgb led strip jumper in the market, features stronger physical features.

If you have any issues, inquiries, or need assistance, please feel free to contact us directly. Strong compatibility: compatible with all 4 pins 5050 rgb LED Strip and 3528 LED Light Strip; compatible with both waterproof and non-waterproof light strips; works with dimmable strip lights. Solid & effective connection: one of the cable end contacts of our led strip lights connectors were soldered already, the other side contacts are open to stick in.
BrandJACKYLED #ad
ManufacturerJACKYLED #ad
Weight0.13 Pounds
Part NumberJK175

3. JACKYLED

#ad

T Shape 4-Pin LED Connectors 10-Pack JACKYLED 10mm Wide Unwired Solderless Gapless Adapter Connectors Terminal Extension 12V 72W with 32pcs Clips for 5050 3528 SMD RGB LED Strip Lights

#ad
JACKYLED #ad - If you need any help when using the connectors, please feel free to contact our online customer team. Just slide the light strip under the connector's pins and snap down the clip. You get extra: the led strip light connector kit comes 10 pcs T boards and 32 pcs connector clips, as well as detailed instructions in both paper and online.

The t sheets can be cut into L sheets which suitable for 90 degree corners connection. Fireproof material: jackyled rgb connectors are made from pBT material, which is heat resistant, fireproof and no Fire Hazard. Multi-purpose: this led connector kit comes with detachable T sheets and straight couplers, perfect for both 3 way connection and extension along a straight line.

Solderless solution: create a quick shunt, solid connection without the hassles of soldering. All 4 pin light strips covered: work with any 4-pin 10mm 039in wide smd 3528/5050 multicolor led flexible strip lights, whether it is a waterproof one or non-waterproof lights for indoor use. 72w max wattage, which can be used for low wattage and high wattage light strips.
BrandJACKYLED #ad
ManufacturerJACKYLED #ad
Height0.39 Inches
Length0.39 Inches
Weight0.07 Pounds
Width0.39 Inches
Part NumberLEDconnecter01
ModelJKLED02

4. JACKYLED

#ad

10 Pcs 4-Pin RGB LED Light Strip Connectors JACKYLED PBC 10mm Wide Gapless LED Tape Light Clips Solderless Adapter Connectors for SMD 5050 Multicolor LED Strips White

#ad
JACKYLED #ad - Please peel off silicon on the surface around soldering area when installing waterproof LED strips. Also be sure to cut along the suggested line evenly so there is room for a proper connection on each side. Fireproof material: jackyled led connectors are made from PBT material, which is heat resistant, fireproof and no Fire Hazard.

Easy to use: quick shunt connection and solderless snap down. 72w max wattage, which can be used for low wattage and high wattage light strips. Note: make sure you put the led strip under the pins and not on top. Application: suitable for all 10mm wide 039 in 4-pin smd 5050 rgb flexible leD strips, making solderless and gapless connections for waterproof and non-waterproof LED light strips.

Package: 10 pcs 4 pin led clip connectors. Ideal for extending the LED strip and straight connection. Open the clip and slide the light strips under the 4 contact prongs, making sure the “+” signs of the two light strips on both sides are aligned. If you have any issues, inquiries or need assistance, please feel free to contact us directly.
BrandJACKYLED #ad
ManufacturerJACKYLED #ad
Height1.5 Inches
Length1 Inches
Weight0.02 Pounds
Width0.5 Inches
Part NumberJKPBC10PCS001
ModelKZ-B3FC
Warranty1 year warranty.

5. JACKYLED

#ad

10 Pcs 4 Pin Solderless Waterproof LED Strip Light Connectors JACKYLED 10mm Strip to Strip Connector RGB Flexible LED Tape Light Gapless Adapter for Waterproof SMD 5050 RGB LED Strip

#ad
JACKYLED #ad - Be sure to place the 4 copper contacts of the waterproof LED strip on the 4 pins. Simply connect the 4 copper contacts on the back of the prepared waterproof LED strip with the 4 pins of the connector, and then close the connector clips firmly to connect.

Also, inquiries or need assistance, make sure to cut evenly along the suggested lines so that there is proper connecting space on each side. New generation: easy clasp 4 pins connectors, specially designed for 10mm waterproof SMD 5050 RGB LED strip lights, provides solderless, gapless connection. If you have any issues, please feel free to contact us directly. Package: 10 x 10mm 4 pin connectors for waterproof smd 5050 rgb led strip. Application: it is only suitable for 10 mm wide waterproof 5050 led strips, others are not applicable.

Our connectors are not suitable for 8mm or other sizes of waterproof led strip light. Easy to use: no soldering required. Besides, because the non-waterproof light strips are too thin and the connection is not tight, it is not recommended to connect the non-waterproof led strips, and they will not work in the end. Note: please check the size of your led strips.
BrandJACKYLED #ad
ManufacturerJACKYLED #ad

6. JACKYLED

#ad

4-Pin LED Light Strip Connectors 10 Pack JACKYLED 10mm Solderless Gapless LED Adapter Connectors for SMD 5050 Multicolor LED Strip Lights

#ad
JACKYLED #ad - How to use: just open the clip with the supplied opener, place the light strip on the pointed pins while keeping the + aligned, snap shut and done! Quick and easy setup with solderless snap down connectors.

What’s it for: a handy tool to connect 4-pin 10mm 039 in wide 5050 rgb flexible LED strips to get an extension. Why choose us: jackyled led connectors are made from pbt fireproof material, fireproof with no fire hazard. If you have any issues, inquiries or need assistance, please feel free to contact us directly. How it work: metal pins in the connector puncture the light strip on the copper contact points, making the connection incredibly secure even with minor wiggle and pulling.

Even works with waterproof LED strips with a silicone coating over, as long as they’re 4-pin. Work with light strips consuming 72W max, heat resistant, safe to pair with both high and low wattage light strips. What you get: 10 pieces of 4 pin led clip connectors and 1 pcs clip opener.
BrandJACKYLED #ad
ManufacturerJACKYLED #ad
ModelJACKYLED719

7. JACKYLED

#ad

RGB Cable 33ft 10m 22AWG 4 Pin LED Strip Extension Cable JACKYLED Led Lights Wire for 10mm 5050 3528 Led Strip RGB Conductor Cord Electric Wire

#ad
JACKYLED #ad - We strive to provide each customer with the best customer service to ensure you have a pleasant shopping experience. All of these make our rgb extension cable more durable and eco-friendly. The electric wire is thicker than most of the similar products on the market, you can bend it in any angle you need and it won’t be easy to tear apart.

Package includes: 10m 32. 8ft extension cord cable; 2 pieces wire holders; 2 pieces 4 Pins 10 mm Wide Strip to Strip Jumper. You can diy the electric wire into two wires for other use like SMD2835. This led lights wire is the perfect accessory for the rgb 5050 3528 LED strip light, extending the length between the LED strips or the controller so that you can arrange the LED strip in your favorite position. Feel free to bend it : our led strip wire with 17pcs tin-plated oxygen-free copper stranded inside each circuit, which ensures high conductivity, low resistance.

If you have any issues, inquiries or need assistance, please feel free to contact us directly. Widely used: our 4 pin led connector cord supports 0-4a current and 0-24v voltage input. Easy to use: use the wire stripper to strip partial external plastic of the rgb extension cable, then solder it to your device, so it can get a fast and firm connection. Also widely used for electronic appliance and equipment, transformer, led strip lights connection, led splitter connection. Also the insulation plastic of this cord is made of high quality PVC which features anticorrosive.
BrandJACKYLED #ad
ManufacturerJACKYLED #ad
Height2.4 Inches
Length3.1 Inches
Weight0.24 Pounds
Width0.8 Inches
Part NumberJK176

8. JACKYLED

#ad

JACKYLED 10mm Wide 4 Pin Unwired Gapless Solderless RGB Connectors for 3528/5050 SMD LED Lights, 10-Pack L Shape Connectors and 10-Pack Waterproof LED Strip Clip Connectors

#ad
JACKYLED #ad - Max wattage: 72w max wattage, these 4 pin connectors can use low wattage and high wattage led light strip. Perfect for LED light DIY project. Package: 10pcs l shape led connectors, 10pcs waterproof led strip connectors.

Application: the l shape connectors fit all 10mm wide 4 pin 3528/5050 wide rgB LED strips. While the 4 pin led connectors only suitable for 10 mm wide waterproof 5050 led strips. They are made from pbt material, heat resistant, Anti-burning, No Fire Hazard. Fireproof material: the led connectors are not like some cheap thin plastic kind. Easy to use: no soldering required. Handy tool for a firmly stable connection, no need to solder. Simply connect the 4 copper contacts on the back of the prepared LED strip with the 4 pins of the led connectors, and then close the connector clips firmly to connect.
BrandJACKYLED #ad

9. JACKYLED

#ad

10-Pack L Shape LED Connectors and 10-Pack Strip to Strip Jumpers, JACKYLED 10mm Wide 4 Pin Gapless Solderless RGB Connectors for 3528/5050 SMD LED Lights

#ad
JACKYLED #ad - And the plastic is thick and solid, which is not be broken easily. Package: 10pcs l shape led connectors, 10pcs led jumpers. Rgb strip to strip jumpers: our 5050 4 pin led connectors with 17 strand tin-plated oxygen-free copper inside each circuit, the wires are thicker than most of the other rgb led strip jumper in the market, features stronger physical features.

Application: fits all 10mm wide 3528/5050 RGB LED strips, perfect for LED tape DIY project. Easy to use: the l shape 10mm 4 pin led light connector is easy to install. One of the cable end contacts of the led strip jumper connectors were soldered already, the other side contacts are open to stick in.

L shape led connectors: made from fireproof material, the L shape 4 pin connectors can withstand high temperatures. These led light strips connectors are flexible and durable enough for bending or twisting in ANY ANGLES without breaking. Simply slot the strip light into connector and clamp the cover no need to solder, ideal for right angle corner strip connection.
BrandJACKYLED #ad

10. JACKYLED

#ad

12pcs Clips, L Shape LED Connectors 4-Pin JACKYLED 10mm LED Right Angle Connectors Solderless RGB Corner Connectors Adapter Extension for 3528/5050 Strip Lights 6pcs L Shaped PCBs

#ad
JACKYLED #ad - What can you get: 6 pieces of l board, 12pcs connector clips, and 1pcs clip opener in this 6-pack. 4-pin light strips covered: work with all 4-pin 10mm 039in wide smd 3528/5050 multicolor led flexible strip lights, whether it is a non-waterproof one or waterproof strip with silicone coating over it.

Go left & right angle: no matter in what orders the RGB+ marked on the connectors, the connection work as long as the + of the light strip on both sides are aligned. Just put the light strip on the pointed pins in the connector, then snap down the clips, the pins will pierce the copper contacts of the light strip to make a solid connection.

If you need any help when using the connectors, please feel free to contact our online customer team. Dual purposes: this connector kit comes with detachable L sheets and straight couplers, perfect for both 90-degree corners and extension along a straight line. Secure connection: create a quick shunt connection without the hassles of soldering.
BrandJACKYLED #ad
ManufacturerJACKYLED #ad
ModelJACKYLED718