Top 9 Steamer Trunk Lid Support – Home Improvement

As an Amazon Associate I earn from qualifying purchases.

1. Restore Hardware

#ad

Antique Trunk Support Camel Back Trunk Lid Support Stay Antique Trunk Hardware Steamer Trunk Stay Support Brace

#ad
Restore Hardware #ad - Made of durable Steel and Brass Plated. Excellent Replica of Antique Original. Dimensions Open: 8".
BrandRestore Hardware #ad
ManufacturerCJW #ad

2. RUYUFE

#ad

Easy to Install, Lid Support for Toy Box and Upward Top-Opening Flap Doors, RUYUFE Lid Stay 105 Degree Open with Soft Close

#ad
RUYUFE #ad - Easy to install lid support-- updated manual can be downloaded in amazon page. Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right.

The lid hinges supports opening the lid at a maximum Angle of 105 degree. Lid stay slow closing -- lid stay support built-in hydraulic dampening device. Compact design of lid stay hinge -- the compact design allows for installation in tight fit areas. Keep lid hinge stay opening, wide usage -- never worry again about having to prop the lid open. This lid support will hold the lid open until you are ready to close. This lid stay is deal for upward opening flaps, such as toy boxes and vanity lids, vertical cabinet doors and storage box, cabinetry, piano or butt hinges.

Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers. Sturdy lid stay with soft close-- the lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight 6-10 lbs, Height 18-19 inch.
BrandRUYUFE #ad
ManufacturerRUYUFE #ad

3. dophee

#ad

Dophee 2Pcs 172x97x11mm Antique Bronze Lid Support Stay Hinge for Home Furniture Upholstery Box Decoration

#ad
dophee #ad - Nice decorative hinges with retro design. An ideal hardware for home, and so on. Special mounting plates allow smooth movement. Size: 172x 97x 11mm/6. 77"x 3. 82"x 043"; the angle of rotation approx. 0¡ã-270¡ã. Material:iron, Color:Antique bronze. Perfect for many uses, office, shop, such as large boxes and cases display. Durable and easy to install.
Branddophee #ad
ManufacturerDophee #ad
Part Number0495RK-3

4. T Tulead

#ad

Tulead Spring Lid Support Left Right Lid Support Down Hinge Red Bronze Iron Support Box Cabinet Hardware Pack of 2 with Mounting Screws

#ad
T Tulead #ad - Package content:2 x Spring Lid Support with Mounting Screws. Total size:182x41x38mm/7. 2"x1. 6"x1. 5"l*w*h. Great for supporting lids on cabinet, chest, door, luggage, box, etc. Spring lid support can be mounted on left or right positions. Max weight Support:30lbs.
BrandT Tulead #ad
ManufacturerT Tulead #ad
Part NumberADD06180465

5. SEN

#ad

Toy Box Hinges, Lid Support, Pressure 120N, Lift Supports, Soft Close Hinges, Kitchen Cabinet Hinges Hydraulic Support Door Cabinet Hinge Spring, Gas Spring, Gas Shocks, Gas Strut

#ad
SEN #ad - Install the nail plate and insert the ball into the plastic hole. 2. The gas spring piston rod is strictly prohibited from rotating to the left. Since the gas struts need to be installed by themselves, choose the model and quantity according to the weight of the actual cabinet door panel.

It is recommended: one for cabinet door width 600mm/23. 6in to achieve parallel opening and closing synchronization. You should consider whether you can install them independently. You can remove the metal clip with a screwdriver or a screw when you need not to use. It is suit for heavier kitchen cabinet, bedroom trunks, toy box or storage box under window bench seat as well as folding table for RV.

It will not be able to be supported, Distance between ball mounts compressed: 6-1/8". Pressure:120n/26lb/12kg per strut;length hole center to hole center :9-11/16'';travel:3-14/25'', it is not suitable for use. 1. The gas spring piston rod must be installed in the downward position, which can reduce friction and ensure the best damping quality and cushioning performance.
BrandSEN #ad
ManufacturerSEN #ad
Part NumberSEN

6. SafeStay

#ad

SafeStay Lid Stay 105 Degree Open with Soft Close, Easy to Install, Lid Support for Toy Box and Chest

#ad
SafeStay #ad - This lid stay will hold the lid open until you are ready to close. Gentle slow close design - Lids will lower slowly and gently to avoid crushing even the smallest of fingers.

The lid stay allows the lid to open at a maximum 105 degree angle. 100% money-back guarantee - if for whatever reason you are unhappy with the product we will refund you, no questions asked! Easy install instructions - easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on either the left or the right side. Small compact design - the compact design allows for installation in tight fit areas. Holds lid open - never worry again about having to prop the lid open.
BrandSafeStay #ad
ManufacturerSafeStay #ad
Height0.5 Inches
Length4.5 Inches
Width3.1 Inches

7. Mcredy

#ad

Mcredy Rotatable Folding Lid Support Hinge Silver Steel 1Pair Lid Stay Lid Support Hinge

#ad
Mcredy #ad - Folding size: 130 x 48 / 016"; installation distance: 26mm / 5. 1" x 1. 9" length x width; unfolded Size: 230 x 10 mm / 9. 0" x 04" length x width; mounting hole diameter: 4mm / 1. 0". Can be opened 180 degrees, and the angle is selected according to your needs. Mainly used for wood projects and can also be used to stabilize folding legs. This lid stay support with soft close hinge is suitable for furniture cabinets, cabinets, wardrobes, boxes, office racks, etc. Package content: 2 x Rotatable Folding Lid Support Hinge. Material: stainless Steel; Color: Silver.
BrandMcredy #ad
ManufacturerMcredy #ad
Part NumberFY19041249

8. CNLEIFU

#ad

4 PCS Bronze Folding Lid Support Hinges for Lid Display Furniture Support Stay Hinge Cabinet Cupboard Box Lift Up Folded Size: Length:4-1/4", Width:7/16"

#ad
CNLEIFU #ad - Used to support shelves and chest lids or display boxes and cases. Material: iron. Prevents a lid from slamming shut. Folded sizel*w: 4-1/4"*7/16"108*11mm. 4 pcs antique lid Support Hinges, matching screws included.
BrandCNLEIFU #ad
ManufacturerCNLEIFU #ad
Part NumberYJX035WJ

9. Ryf

#ad

RUYUFE Lid Support Hinge Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Kitchen Support 40lb/2pcs

#ad
Ryf #ad - Max weight of lid stay--40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side. Wide usage--perfect as toy box hinges, Lid stay support good for kitchen cabinet door cupboard and window seat, wardrobe.

Durable lid support hinge--made of zinc ally in satin Nickel, Lid support can be mounted for flap support or bar counter function. Easy to install lid hinge --the lid hinge is used for side mounting and top mounting. Only mark two points for drilling holes, and screw each mounting bracket into its respective place. Soft close stay-every lid support can be adjusted in largest 75°、90° and 100° and used for Right or Left Hand mounting. Installing screws and Allen wrench in package.
BrandRyf #ad
ManufacturerRYF #ad