Top 9 Sierra Pen Kit – Woodworking Project Kits

As an Amazon Associate I earn from qualifying purchases.

1. Penn State Industries

#ad

Penn State Industries PKGAPENSS Gatsby Gold Pen Kit Starter Package Woodturning Project

#ad
Penn State Industries #ad - A lathe is needed to 'turn' into finished pens. Also includes the bushing set pkgabu and the Gatsby Barrel Trimming Sleeve PKGABTS needed to make the pens. Includes 3 pkgapen24 gold gatsby Twist Ballpoint Pen Woodturning Kits. Features a 27/64" single tube design, a twist mechanism, and a Parker style ballpoint black refill. Minimum blank size needed to turn is 3/4" x 3/4" x 2-1/2". Blanks, and all other turning tools and supplies are not included. This is a woodturning project kit. Pen hardware, drill bit, bushing set, and trimming sleeve only.
BrandPenn State Industries #ad
ManufacturerPenn State Industries #ad
Part NumberPKGAPENSS
ModelPKGAPENSS

2. Legacy Woodturning

#ad

6 Pack, Legacy Woodturning, Polaris Twist Pen Kit, Black Titanium

#ad
Legacy Woodturning #ad - This is a woodturning project; tools, bushings, drill bits, blanks are not included. Blank size: 5/8" x 5" Not Included. Tube size: one 3/8" tube; Requires 3/8" Drill Bit. Type: ballpoint Twist; Uses Parker Style Refill. Finish: Black Titanium.
BrandLegacy Woodturning #ad
ManufacturerLegacy Woodturning #ad
Height1 Inches
Length5 Inches
Weight3 ounces
Width1 Inches
Part NumberLWT-PNKT-PolarisTW-BlackT-6pk

3. Penn State Industries

#ad

Penn State Industries PKBIGSS2 Big Ben Cigar Twist Ballpoint Pen Kit Starter Package Woodturning Project

#ad
Penn State Industries #ad - A lathe is needed to 'turn' into finishED PENS. Features a 10mm dual tube design, a twist mechanism, and a Parker style ballpoint refill in black. Also includes the bushing set PKBIG-BU needed to make the pens.

This is a woodturning project kit. Big, handsome, powerfully built writing instruments. Pen hardware and bushing set only. Minimum blank size needed to turn is 3/4" x 3/4" x 4-1/2". Blanks, drill bit, and all other turning tools and supplies are not included. You will receive 1 of each in gold pkbig, gun metal pkbiggm, 2-tone gold & gun Metal PKBIGTTA, Rhodium PKBIGP, and 2-tone Gold & Chrome PKBIGTTB. Thick barrels to show off your turning skills and material. Includes 5 big ben cigar twist ballpoint pen woodturning kits.
BrandPenn State Industries #ad
ManufacturerPenn State Industries #ad
Part NumberPKBIGSS2
ModelPKBIGSS2

4. Penn State Industries

#ad

Penn State Industries PKGAFSS Gatsby Grande Twist Ballpoint Pen Kit Starter Package Woodturning Project

#ad
Penn State Industries #ad - Bigger, thicker, and 10% wider than our original Gatsby. You will receive 1 of each in 24kt gold pkgaf24, chrome pkgafch, Gun Metal PKGAFGM, 24kt Gold & Gun Metal PKGAF24GM.

A lathe is needed to 'turn' into finishED PENS. Blanks, drill bit, and all other turning tools and supplies are not included. Features a 3/8" single tube design, a twist mechanism, and a Parker style ballpoint refill. Pen hardware and bushing set only. And chrome & gun metal PKGAFCHGM. This is a woodturning project kit. Includes 5 gatsby grande twist ballpoint pen woodturning kits. Also includes the bushing set PKGAFBU needed to make the pens. Minimum blank size needed to turn is 3/4" x 3/4" x 2-1/2".
BrandPenn State Industries #ad
ManufacturerPenn State Industries #ad
Part NumberPKGAFSS
ModelPKGAFSS

5. Legacy Woodturning

#ad

Chrome and Gun Metal, 10 Pack, Legacy Woodturning, Viceroy Pen Kit

#ad
Legacy Woodturning #ad - Type: ballpoint Twist; Uses Parker Style Refill. Tube size: one 27/64" tube; requires 27/64" Drill Bit. Finish: chrome and Gun Metal. Blank size: 5/8" x 5" Not Included. This is a woodturning project; tools, drill bits, bushings, blanks are not included.
BrandLegacy Woodturning #ad
ManufacturerLegacy Woodturning #ad
Height8 Inches
Length6 Inches
Weight0.5 Pounds
Width2 Inches
Part NumberLegacy_Vice_Kit_Chrome_&_GM_10pk

6. Peachtree Woodworking Supply

#ad

2 inch by 2 inch Micro-Mesh Soft Touch Sanding Pads w/ Galvanized Steel Dispenser, Ideal for Pen & Bottle Stopper Turning Perfect For Cycle Sanding Acrylic Materials 9 Micro Mesh Pads w/ Dispenser

#ad
Peachtree Woodworking Supply #ad - Specifically designed for the micro-mesh 2” x 2” 9 pack of abrasives, this dispenser has color coded grit chart to help keep your pads in order. Package comes with 9 color coded micro mesh pads and 1 each galvanized steel dispenser. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process.

It can be mounted flat against a wall or it can be mounted to a table top. The more you get into to woodturning the more the reality of being organized comes into play. This works wonderfully well when step sanding your finished turning project. The dispenser is made from corrosion resistant galvanized steel which also makes it extra durable for the workshop environment. This pack works extremely well when working with ca finishes leaving your work looking like it was done by a professional! When using the pads it is recommended that start at the lower grit of 1500 and step or cycle your way up to the high grit of 12000 Of course you don’t have to mount it at all.

Pen, bottle stopper or even small goblet finishing just became a bit more enjoyable with the micro Mesh Soft Touch sanding pads! Starting with the lowest grit of 1500 all the way up to 12000 grit this abrasive pad pack is sure the leave your project just the way you want it. Simply cycle your way through the grits by pulling the next grit from the dispenser and placing the used one back on top. This couldn’t be more true than when it comes to our abrasives. This unique dispenser accepts 2” x 2” Micro-Mesh abrasive pads.
BrandPeachtree Woodworking Supply #ad
ManufacturerPeachtree Woodworking Supply inc. #ad
Part NumberVN-309-11554

7. Penn State Industries

#ad

Penn State Industries PKBELSS Bella Twist Ballpoint Pen Kit Starter Package Woodturning Project

#ad
Penn State Industries #ad - Includes 4 bella pen woodturning kits. A lathe is needed to 'turn' into finishED PENS. Pen hardware and bushing set only. Blanks, drill bit, and all other turning tools and supplies are not included.

You will receive 1 of each of the following finishes: chrome pkbelch, gun Metal PKBELGM, 24kt Gold PKBEL24, and 24kt Gold & Gun Metal combo PKBEL24GM. This is a woodturning project kit. The bella features a single 10mm tube design, a smooth reliable twist mechanism, and a Parker style ballpoint refill. Also includes the bushing set PKBELBU needed to make the pens. Minimum blank size needed to turn is 3/4" x 3/4" x 2-1/2".
BrandPenn State Industries #ad
ManufacturerPenn State Industries #ad
Part NumberPKBELSS
ModelPKBELSS

8. STARBOND

#ad

Pen Turning, Premium Instant CA Cyanoacrylate Adhesive Super Glue Plus Extra Cap and Microtips, 2 oz. for Woodturning, Stabilizing, Inlay, Starbond EM-02 Super Fast Thin, Finish, Hobby

#ad
STARBOND #ad - Premium ethyl cyanoacrylate super glue - lab tested for optimal performance: High performance industrial grade adhesive. Properties: viscosity: 2-3 cps meaning the thickness of the liquid is similar to that of water. Penetrating abilities of up to 0002" in size.

Water-thin ca glue goes deep to infiltrate and stabilize through capillary action. Store the bottle under 40°f before AND after use to qualify for our 30 Month Shelf Life Warranty. Extra supplies: 2 applicator caps, and a bag of micro-tips for precision. If the glue does not last, we will provide a 100% refund or replacement. Penetrates the finest micro-fractures, pen making, hardening, hobby, stabilizing, and cracks through capillary action.

The extra applicator caps are in case of future clogs, 1 clog-free stopper, the clog-free stopper has a tiny pin to prevent clogs, and micro-tips provide the perfect extension for tiny cracks. Wicking type" adhesive: great for woodturning finish, pores, fossil prep, inlays, and bonding close-fitting parts. Long lasting superior shelf life: starbond ca glues have a shelf life of several years in the cold.
BrandSTARBOND #ad
ManufacturerStarbond #ad
Part NumberEM-02-2
Model022

9. Penn State Industries

#ad

Penn State Industries PKGEARSS Gearshift Ballpoint Pen Kit Starter Package Woodturning Project

#ad
Penn State Industries #ad - The gearshift mechanism design is based off a 5-speed H-pattern shifter. Features a single 3/8" tube design, our gearshift mechanism, and a Parker style ballpoint refill. A lathe is needed to 'turn' into finishED PENS.

Shifter handle includes an etched 5-speed pattern. This is a woodturning project kit. Inspired by our best selling bolt action pen mechanism. Minimum blank size needed to turn is 3/4" x 3/4" x 3". You will receive 1 of each in the following finishes: Chrome PKGEARCH, Antique Pewter PKGEARAP, and Antique Brass PKGEARAB. Cap features a car tire with tread and hubcap. Industrialized crowbar clip attached to the body with two small screws.

Blanks, drill bit, and all other turning tools and supplies are not included. Tip features the same tire tread as the cap. Pen hardware and bushing set only. Includes 3 gearshift ballpoint pen woodturning project kits. Refill fully advances at the front of the shifter and fully retracts at the back. Also includes the bushing set PKMAJSQBU needed to make the pens.
BrandPenn State Industries #ad
ManufacturerPenn State Industries #ad
Part NumberPKGEARSS
ModelPKGEARSS