Top 9 Rheem Flame Sensor Rod 62-23543-01 – Household Furnace Parts & Accessories

As an Amazon Associate I earn from qualifying purchases.

1. Rheem

#ad

Rheem 62-23543-01 Furnace Burner Flame Sensor Genuine Original Equipment Manufacturer OEM Part

#ad
Rheem #ad - Genuine original equipment Manufacturer OEM part. Wear work gloves to protect your hands. Burner flame sensor 62-23543-01 detects when the burner flame has ignited and sends a signal to the control board to stop the igniter from operating. Disconnect electrical power and shut off the gas supply before installing this part. This burner flame sensor part number 62-23543-01 is for furnaces. Compatible Brands: Rheem.
BrandRheem #ad
ManufacturerRheem #ad
Weight0.01 Pounds
Part Number62-23543-01

2. LUXRILIX

#ad

62-23543-01 flame Sensor Rod furnace ignitor for gas furnace fit for Rheem(2 pack)

#ad
LUXRILIX #ad - Easy to install, cost-effective: you can easily replace damaged sensors by following our installation process. Help you save equipment costs!Before installing this component, disconnect the power and turn off the air source.

Length mounting flange to sensor tip 2-1/2", length-sensor offset: 1-9/16". Satisfactory service: for any reason you are not completely satisfied with the product, you can ask for a replacement or a full refund. Replacement model:62-23543-01, 62-23543-02, 62-23543-03, 62-23543-04. Applicable circumstances:detect when the burner flame ignites and send a signal to the control panel to stop the ignition.

Wear work gloves to protect your hands. If you are unsure whether this flame sensor stick is suitable for your device, please feel free to contact us or ask questions through Amazon. Termination 1/4" male thread quick connect. Excellent quality: made of high quality and hard wearing metals and ceramics, well tested and durable. Angle sensor offset: 90 degrees.
BrandLUXRILIX #ad
Manufactureryl super products #ad

3. TOMOON

#ad

62-23543-01 Furnace Burner Flame Sensor RodOEM for Rheem, By TOMOON(2 pack)

#ad
TOMOON #ad - Part number 62-23543-01 furnace burner flame sensor rod 2pack)-designed for the gas HVAC system. Functionthe furnace flame sensor is designed to detect the flame. If you are not sure whether this Flame Sensor Rod correctly fit your appliance, please feel free to contact us or ask a question through Amazon.

Superiorityeasy instal nd cost-effective. You can follow our install process replace the broken sensor easily. Termination: 1/4”male quick connect, Angle - sensor offset: 90 degree. Burner flame sensor 62-23543-01 detects when the burner flame has ignited and sends a signal to the control board to stop the igniter from operating. Just spend little money to fix your machine.

Wear work gloves to protect your hands. ). Snug fit the rheem Ruud, and Weatherking residential furnace models Furnace. High qualitymade of high-quality and wear-resists metal and ceramics, can last for long. Saves your money from the appliance guy!(note:Disconnect electrical power and shut off the gas supply before installing this part. Satisfying servicefor any reason you're not completely satisfied, you can ask for a replacement or full refund.
BrandTOMOON #ad
Manufacturerwsh supplier #ad
Part Number62-23543-01-2

4. LUXRILIX

#ad

62-23543-01 Flame Sensor Rod furnace Ignitor for Gas Furnace Fit for Rh.eem(4 pack)

#ad
LUXRILIX #ad - Length mounting flange to sensor tip 2-1/2", length-sensor offset: 1-9/16". Replacement model:62-23543-01, 62-23543-03, 62-23543-02, 62-23543-04. If you are unsure whether this flame sensor stick is suitable for your device, please feel free to contact us or ask questions through Amazon.

Wear work gloves to protect your hands. Angle sensor offset: 90 degrees. Termination 1/4" male thread quick connect. Satisfactory service: for any reason you are not completely satisfied with the product, you can ask for a replacement or a full refund. Applicable circumstances:detect when the burner flame ignites and send a signal to the control panel to stop the ignition.

Excellent quality: made of high quality and hard wearing metals and ceramics, well tested and durable. Easy to install, cost-effective: you can easily replace damaged sensors by following our installation process. Help you save equipment costs!Before installing this component, disconnect the power and turn off the air source.
BrandLUXRILIX #ad
Manufactureryl super products #ad

5. Stanbroil

#ad

Stanbroil 62-23543-01 Flame Sensor Igniter Sensing Rod Fit for Rheem Furnace 1 Pack

#ad
Stanbroil #ad - Ensure long-lasting and high performance. The flame sensor is a safety component of a furnace located on the interior of the burner assembly. Function: the furnace flame sensor is designed to detect the flame. A good replacement for Rheem 62-23543-01. Premium quality: flame sensor is made from durable high quality wear-resists metal and ceramics. Easy to install: Fix it yourself is simple and cost-effective. Termination: 1/4” male quick connect, Angle - sensor offset: 90 degrees. It monitors and verifies whether a flame is burning inside the unit.
BrandStanbroil #ad
ManufacturerStanbroil #ad
Part NumberA009-SR

6. Duralight

#ad

Duralight Furnace Flame Sensor Direct Replacement For Rheem Ruud Weatherking OEM Part 62-23543-01

#ad
Duralight #ad - Direct replacement for rheem - ruud - weatherking - comfort Aire - Century Part Numbers 62-23543-01 and 62-23543-03. 1/4" quick Connect Terminal. Duralight Two Year Replacement Warranty. Restores Reliable Operation. 90 degree bend angle - Ceramic Length 1-1/2".
BrandDuralight #ad
ManufacturerDURALIGHT #ad
Part NumberFBA_R-62-23543-01
Model900-11

7. IDEASURE

#ad

Replaces 62-23543-01, Flame Sensor Fit for Rheem Furnace, Flame Sensor Igniter Sensing Rod Fit for Rheem & Ruud Gas Furnace Heater, 2 Pack

#ad
IDEASURE #ad - Easy to install and works well. Package includes 2 pcs furnace flame sensors. Made from durable and resists wear material, and well-tested by the manufacturer before shipment. This flame sensor is for rheem & ruud gas furnace, Rheem criteron II gas furnace etc. For more fitment, work with Rheem classic 90 plus, pls check the description part. We provide excellent service and please contact us if you have any questions. Exact replacement for the part # 62-23543-01, 62-23543-03, 62-23543-02, 62-23543-04.
BrandIDEASURE #ad
ManufacturerIDEASURE #ad
Weight0.05 Pounds
Part NumberFlame Sensor-01
ModelFlame Sensor-01

8. Romalon

#ad

Romalon 62-23543-01 Furnace Burner Flame Sensor Rod for Rheem 1Pack

#ad
Romalon #ad - Easy install:Fix it yourself is simple and cost-effective. Part number:62-23543-01 Furnace Burner Flame Sensor. This flame sensor is a direct replacement for many Rheem, Ruud, and Weatherking residential furnace models. If you are not sure if part is correct, ask us! We are always happy to help! Please Contact Us. Made of high-quality and wear-resists metal and ceramics.
BrandRomalon #ad
ManufacturerRomalon #ad
Weight0.05 Pounds
Part Number62-23543-01

9. Rheem

#ad

OEM Upgraded Replacement for Rheem Furnace Flame Sensor 62-23543-04

#ad
Rheem #ad - When the flame sensor goes bad, the furnace will light for several seconds and then turn back off on the flame sensor safety. This is a brand New Furnace Flame Sensor.
BrandRheem #ad
ManufacturerReplacement for Rheem #ad
Height6 Inches
Length6 Inches
Width6 Inches
Part Number62-23543-04