
Uncategorized
As an Amazon Associate I earn from qualifying purchases.








Top 9 Onsrud Router Bits – Router Bits
As an Amazon Associate I earn from qualifying purchases.
1. LMT Onsrud
#ad
30 Degree Helix, 0.3750" Cutting Diameter, 0.3750" Shank Diameter, 2 Flutes, LMT Onsrud 60-127MWSolid Carbide Max Life Compression Spiral Cutting Tool, Inch, 3.0000" Overall Length, Uncoated Bright Finish
#adLMT Onsrud #ad - When run in a counterclockwise direction right-hand cut spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Double flute, 30 degree angle. Round shanks allow use with a wide variety of toolholding systems.More information #ad
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.Brand | LMT Onsrud #ad |
Manufacturer | LMT Onsrud #ad |
Weight | 0.15 Pounds |
Part Number | 60-127MW |
Model | 60-127MW |
More information #ad
2. LMT Onsrud
#ad
Inch, 0.2500" Shank Diameter, Uncoated Bright Finish, LMT Onsrud 63-610 Solid Carbide Upcut Spiral O Flute Cutting Tool, 0.1250" Cutting Diameter, 2.0000" Overall Length, 22 Degree Helix, 1 Flute
#adLMT Onsrud #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.More information #ad
Round shanks allow use with a wide variety of toolholding systems. Single flute, 22 degree angle. When run in a counterclockwise direction right-hand cut spiral fluted tools evacuate chips up and out of the cut to reduce clogging.Brand | LMT Onsrud #ad |
Manufacturer | LMT Onsrud #ad |
Part Number | 63-610 |
Model | 63-610 |
More information #ad
3. LMT Onsrud
#ad
0.5000" Cutting Diameter, 0.5000" Shank Diameter, 2 Flutes, 30 Degree Helix, Inch, Uncoated Bright Finish, 3.5000" Overall Length, LMT Onsrud 57-365 Solid Carbide Downcut Spiral Wood Rout
#adLMT Onsrud #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems.More information #ad
Double flute, 30 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction right-hand cut spiral fluted tools evacuate chips up and out of the cut to reduce clogging.Brand | LMT Onsrud #ad |
Manufacturer | LMT Onsrud #ad |
Height | 0.8 Inches |
Length | 4 Inches |
Width | 0.8 Inches |
Part Number | 57-365 |
Model | 57-365 |
More information #ad
4. LMT Onsrud
#ad
0.2500" Cutting Diameter, 0.2500" Shank Diameter, 30 Degree Helix, Uncoated Bright Finish, 2 Flutes, LMT Onsrud 57-285 Solid Carbide Downcut Spiral Wood Rout, 2.5000" Overall Length, Inch
#adLMT Onsrud #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems.More information #ad
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Double flute, 30 degree angle. When run in a counterclockwise direction right-hand cut spiral fluted tools evacuate chips up and out of the cut to reduce clogging.Brand | LMT Onsrud #ad |
Manufacturer | LMT Onsrud #ad |
Height | 0.5 Inches |
Length | 4 Inches |
Width | 0.5 Inches |
Part Number | 57-285 |
Model | 57-285 |
More information #ad
5. LMT Onsrud
#ad
2.0000" Overall Length, Uncoated Bright Finish, 30 Degree Helix, Inch, 0.1250" Cutting Diameter, 0.2500" Shank Diameter, 2 Flutes, LMT Onsrud 57-240 Solid Carbide Downcut Spiral Wood Rout
#adLMT Onsrud #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Double flute, 30 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.More information #ad
When run in a counterclockwise direction right-hand cut spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems.Brand | LMT Onsrud #ad |
Manufacturer | LMT Onsrud #ad |
Height | 0.5 Inches |
Length | 4 Inches |
Width | 0.5 Inches |
Part Number | 57-240 |
Model | 57-240 |
More information #ad
6. LMT Onsrud
#ad
2 Flutes, 3.0000" Overall Length, LMT Onsrud 52-700 Solid Carbide Upcut Spiral O Flute Cutting Tool, 0.2500" Shank Diameter, Inch, 22 Degree Helix, Uncoated Bright Finish, 0.2500" Cutting Diameter
#adLMT Onsrud #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction right-hand cut spiral fluted tools evacuate chips up and out of the cut to reduce clogging.More information #ad
Double flute, 22 degree angle. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.Brand | LMT Onsrud #ad |
Manufacturer | LMT Onsrud #ad |
Height | 0.5 Inches |
Length | 4 Inches |
Width | 0.5 Inches |
Part Number | 52-700 |
Model | 52-700 |
More information #ad
7. Yonico
#ad
Yonico 31012-SC 1/8-Inch Diameter O Flute Upcut Spiral End Mill CNC Router Bit 1/4-Inch Shank
#adYonico #ad - Polished to a mirror finish from a solid carbide rod for precision & accuracy. Premium c3 micro-grain solid tungsten carbide for a high-performance industrial quality tool. For use on cnc, table mount and handheld routers.More information #ad
For cnc milling and routing on aluminum and plastics where a clean bottom surface edge of material is required. This o-flute bit has a cutting diameter of 1/8", cutting height of 1/2", overall length 2" and 1/4" shank.Brand | Yonico #ad |
Manufacturer | Yonico #ad |
Height | 0.1 Inches |
Length | 2 Inches |
Weight | 0.04 Pounds |
Width | 0.25 Inches |
Part Number | 31012-SC |
Model | 31012-SC |
More information #ad
8. LMT Onsrud
#ad
2.5000" Overall Length, Uncoated Bright Finish, 1 Flute, 0.2500" Cutting Diameter, Inch, 25 Degree Helix, 0.2500" Shank Diameter, LMT Onsrud 65-025 Solid Carbide Upcut Spiral O Flute Cutting Tool
#adLMT Onsrud #ad - Single flute, 21 degree angle. When run in a counterclockwise direction right-hand cut spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems.More information #ad
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.Brand | LMT Onsrud #ad |
Manufacturer | LMT Onsrud #ad |
Height | 0.5 Inches |
Length | 4 Inches |
Width | 0.5 Inches |
Part Number | 65-025 |
Model | 65-025 |
More information #ad
9. LMT Onsrud
#ad
0.2500" Shank Diameter, LMT Onsrud 64-025 Solid Carbide Downcut Spiral O Flute Cutting Tool, 0.2500" Cutting Diameter, 1 Flute, 25 Degree Helix, Inch, Uncoated Bright Finish, 2.0000" Overall Length
#adLMT Onsrud #ad - Single flute, 21 degree angle. When run in a counterclockwise direction right-hand cut spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.More information #ad
Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.Brand | LMT Onsrud #ad |
Manufacturer | LMT Onsrud #ad |
Height | 0.5 Inches |
Length | 4 Inches |
Width | 0.5 Inches |
Part Number | 64-025 |
Model | 64-025 |
More information #ad