Uncategorized
As an Amazon Associate I earn from qualifying purchases.
Nilight #ad - Protect your car and your electrical device from short circuit, overload etc. 1 × 18. Standard blade fuse: 0 Safety protection: unique design of the dual slot tight-fitting waterproof lid to enhance moisture-proof and waterproof performance.
5a, 10a, 4a, 3a, 25a, 30a atc/ato blade fuse of 19. Package include: 10 x 14awg atc/ato inline Fuse Holder and 120 PCs standard blade fuse+Puller.
CPOWER #ad - The fuse box has LED light indicators and a strong construction for guaranteed results. Base:pbt, cap:pc, screw:stainless steel, terminal:Nickel plated copper, label:PP*70. This 6 circuit fuse box holder with ground is very easy to install. With cover and fuse: transparent plastic cover with push latch system, 2 x 10A 4 x 15A, splash and dust-proof design.
Wide use: this fuse block holder with ground is suitable for all vehicles with a 10-32 Volt DC power source. So it come with multi-function stickers for diY your specific need, bus, ship, car, tanker, convenient for examination and repair, easy to troubleshoot in outdoor; widely used in vehicle, marine, subway etc.
With 12 pcs blade fuse 2 x 5A, easy to operate, 4 x 20A. Premium quality: the 6 way fuse box with ground buss is crafted to perfection with the best quality materials and with special attention to detail so it can be incredibly efficient and durable. It is both safe and easy for you to check and replace the blown fuse. Led warning indicator: this fuse block with negative bus can easily identify & replace blown fuses immediately without guessing! The LED indicator lights up when a blown fuse is detected.
Qizpcer #ad - Heavy duty 14 gauge Red Color Wire Fuse Holder. Waterproof lid for a Rainy Day, This item is Safe and Reliable. Inline fuse holder for ATC/ATO Blade Fuse. High quality, supports 12V Fuse up to 15A. Package included 10 x fuse Holder and 10 x 15Amp Fuse.
Youngneer #ad - 12v inline fuse holder for standard blade fuses -fuses holder kit including 12pcs 14 awg inline fuse holders with 60pcs standard car fuses 2a, 5a, 15a, 7.5ax5pcs+10a, 3a, 20a, 30ax10PCS . A good helper for your car problems. Good conductivity&high-temperature resistance-the standard blade fuse holder made of tinned copper as a conductor to ensure good bending performance, VCD player, trucks, dashboard camera, etc.
Waterproof rubber cap design-this 14 gauge heavy duty inline wiring harness with tight-fitting waterproof rubber cap, theses fuse link wire are not easy to fall off or enter water that can protect all standard blade fuse inside, your car and electrical device from short circuit.
Inline blade fuse holder easy installationthis 12v-dc atc/ato tc/ato in line fuse holder has long enough wire loop Length;automotive fuse holder loop length: 11. 8 inches / 30cm. Firstly, cutting the inline holder 14awg looped wire about in the middle, one of the ends connect to your power source, the other to the accessory power wire that you are attempting to power. The auto fuse size:19mm x 5mm x 18.
VORCOOL #ad - The flat plug fuse 20A with cable for power tap directly on the fuse. Length: approx. Applicable safety: aTO ATC Standard 6. 3mm blade fuses. Max.
Life-Oil #ad - 1/4" ring terminal, 45 Amp For Anderson Powerpole Connectors. Total length of the cable: 13. 78inch. Package included:Everything is included in the first picture. Bipolar atc type 10 GA fuse holder. Includes 4 pcs atc 40 amp fuses. 2 tight bands.
Ebow #ad - Atc fuse holder 16 gauge. Package included: 3 x standard blade fuse holders and 4 X Standard Blade Fuse3, 5, 7. 5 with 10 Amp. Condition: 100% Brand New. Waterproof your electrical connection using this fuse holder. In-line fuse Holder and Easy to install.
SENSTREE #ad - Adding circuit protection for car alarms, trucks, ATVs, boats, car recorder, Jeeps, GPS, etc. High quality and good material: Fuse holders wiring harness select Tin plated copper as conductor to ensure its good bending performance, melting resistance and excellent electrical conductivity.
5pcs 12 guage/awg fuse holders: heavy duty 12 awg Fuse Holders, CD players, protecting circuits and electrical equipment.
100pcs auto car standard blade fuse: 2a / 10a / 15a / 3a / 20A / 5a / 25a / 7.5a / 30a /35a car fuse, 10pcs each. Widely used for cars, VCD player, UTVs, etc. Easy to add additional circuits for cars, fax machines and etc.
Top 9 ATC Fuse Holder – Blade Fuses
As an Amazon Associate I earn from qualifying purchases.
1. Nilight
#ad2 Years Warranty, Nilight, 50029R 120 Pcs Standard Blade Fuse 5A/7.5A/10A/15A/20A/25A/30A AMP Assorted Set with 10 Pack 14AWG ATC/ATO Inline Fuse Holder
#ad5a, 10a, 4a, 3a, 25a, 30a atc/ato blade fuse of 19. Package include: 10 x 14awg atc/ato inline Fuse Holder and 120 PCs standard blade fuse+Puller.
More information #ad
1 mm. Suitable fuses: fits for 1a, 20a, 15a, 5a, 2a, 7. Fuse type: blade. 75 x03 inch. 74 x0 It's no doubt that this is an inline fuse holder extremely safe and reliable. Material: Zn alloy/Plastic. 10 pack in-line fuse holder: heavy duty 14 gauge AWG red color wire, great look and added protection to the circuit. 5 × 5.| Brand | Nilight #ad |
| Manufacturer | Nilight #ad |
| Part Number | 50029R |
| Model | 50029R |
| Warranty | 2 Years Warranty |
More information #ad
2. CPOWER
#ad6 Circuit ATC/ATO Fuse Box Holder with Negative Bus, 6-Way Fuse Block with Ground, for Auto Marine, Protection Cover & LED Light Indication, Bolt Terminals, Boat, with 12 pcs Fuse, 70 pcs Stick Label
#adWide use: this fuse block holder with ground is suitable for all vehicles with a 10-32 Volt DC power source. So it come with multi-function stickers for diY your specific need, bus, ship, car, tanker, convenient for examination and repair, easy to troubleshoot in outdoor; widely used in vehicle, marine, subway etc.
More information #ad
Easy to set up: no need to worry about getting your fuse box ready to use. Adds extra protection to your fuse box & fuses. With 12 pcs blade fuse 2 x 5A, easy to operate, 4 x 20A. Premium quality: the 6 way fuse box with ground buss is crafted to perfection with the best quality materials and with special attention to detail so it can be incredibly efficient and durable. It is both safe and easy for you to check and replace the blown fuse. Led warning indicator: this fuse block with negative bus can easily identify & replace blown fuses immediately without guessing! The LED indicator lights up when a blown fuse is detected.
| Brand | CPOWER #ad |
| Manufacturer | Horsmile #ad |
| Height | 3.35 Inches |
| Length | 3.46 Inches |
| Width | 1.44 Inches |
| Part Number | SR0010001-6WF |
More information #ad
3. Qizpcer
#ad14 AWG Inline Fuse Holder, 12V-DC ATC/ATO 14 Gauge Fuse Holder for 15A Blade Fuse 10 Pack
#adMore information #ad
| Brand | Qizpcer #ad |
| Manufacturer | Qizpcer #ad |
| Part Number | BSXZ |
More information #ad
4. Youngneer
#adYoungneer 14 Gauge Inline Fuse Holder 12V-DC ATC/ATO 12Pcs Blade Fuse Holders kit with 60 Pcs Standard Car Fuses 14 AWG Wiring Harness Waterproof Pigtail for Fuses 2A 3A 5A 7.5 A 10A 15A 20A 30A
#adWaterproof rubber cap design-this 14 gauge heavy duty inline wiring harness with tight-fitting waterproof rubber cap, theses fuse link wire are not easy to fall off or enter water that can protect all standard blade fuse inside, your car and electrical device from short circuit.
More information #ad
Adding circuit protection for car alarms, car recorder, GPS, SUVs, UTVs, refractory resistance and excellent electrical conductivity. Heavy duty 14awg red power wire suitable for cars, boats，marine ATVs, Jeeps, etc. Inline waterproof fuse holder use- when encountering these problems in driving: cigarette lighter, headlights, air-conditioner, radio or other equipment could not function well, ABS, wiper, inline blade fuse holder& auto car fuse will help you deal with these problems. Inline blade fuse holder easy installationthis 12v-dc atc/ato tc/ato in line fuse holder has long enough wire loop Length;automotive fuse holder loop length: 11. 8 inches / 30cm. Firstly, cutting the inline holder 14awg looped wire about in the middle, one of the ends connect to your power source, the other to the accessory power wire that you are attempting to power. The auto fuse size:19mm x 5mm x 18.
| Brand | Youngneer #ad |
| Manufacturer | Youngneer #ad |
| Part Number | Youngneer-0066 |
More information #ad
5. Valley Enterprises
#adWith Ring Terminals, with Anderson Powerpole Connectors, Wire 10 Gauge, Valley Enterprises Dual Positive/Negative ATC Style Fuse Holder
#adValley Enterprises #ad - Total cable length: 12 inches. Gold plated 1/4" ring terminals on one end and 45 Amp Powerpole Powerpole connectors on the other Genuine Anderson Powerpole Connectors. Includes 2 atc style 40 Amp fuses. Dual positive/negative ATC Style 10 GA Fuse Holder.More information #ad
| Brand | Valley Enterprises #ad |
| Manufacturer | Powerwerx #ad |
| Part Number | RGH-10 |
More information #ad
6. VORCOOL
#adVORCOOL ATO ATC Standard Blade Fuse Holder with 20A Blade Fuse for Car Pack of 4
#adMore information #ad
Cable wire: ul1015 16 awg red. System capacity up to 20A. 110mm. Voltage: 32V. Max. These backups can be used in current vehicles that have installed no ignition or permanent plus terminal in the radio slot.| Brand | VORCOOL #ad |
| Manufacturer | VORCOOL #ad |
| Height | 0.59 Inches |
| Length | 6.3 Inches |
| Weight | 0.09 Pounds |
| Width | 1.1 Inches |
| Part Number | W162100PACXX5276 |
| Model | W162100PACXX5276 |
More information #ad
7. Life-Oil
#adFuse Holder Bipolar ATC 10 GA with Ring Terminals and 45 Amp for Anderson Powerpole Connectors
#adMore information #ad
| Brand | Life-Oil #ad |
| Manufacturer | Life-Oil #ad |
| Part Number | Life-OilFuse Holder |
More information #ad
8. Ebow
#ad3 Pack -12V Water-resistant Add-A-Circuit Blade Type Inline Fuse holder with Cap16 Gauge Larger
#adMore information #ad
| Brand | Ebow #ad |
| Manufacturer | Ebow #ad |
| Weight | 0.15 Pounds |
| Part Number | 0000124 |
| Model | 032456 |
More information #ad
9. SENSTREE
#adCar Inline Water-resistant Fuse Holder Automotive Blade Fuse Holder 5pcs with 100pcs Auto Standard Blade Fuses, SENSTREE 12 AWG Gauge ATC/ATO Fuse Holder, 2A 3A 5A 7.5A 10A 15A 20A 25A 30A 35A
#ad5pcs 12 guage/awg fuse holders: heavy duty 12 awg Fuse Holders, CD players, protecting circuits and electrical equipment.
More information #ad
Waterproof cap of fuse holder: Unique design of dual slot tight-fitting waterproof lid to enhance moisture-proof, waterproof performance and dust proof. Suitable for atc/ato type fuses: rated current: 41a, dashboard camera, suvs, always select the correct current rating before installing or replacing the fuse.1100pcs auto car standard blade fuse: 2a / 10a / 15a / 3a / 20A / 5a / 25a / 7.5a / 30a /35a car fuse, 10pcs each. Widely used for cars, VCD player, UTVs, etc. Easy to add additional circuits for cars, fax machines and etc.
| Brand | SENSTREE #ad |
| Manufacturer | SENSTREE #ad |
| Weight | 0.43 Pounds |
| Part Number | ZAU-001 |
More information #ad