As an Amazon Associate I earn from qualifying purchases.
The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. The use of our 3 way duct connector saves on construction costs and significantly reduces the overall cost compared to conventional cast iron connector of the same specification.
The dryer duct connector is seamlessly connected to achieve a good leakproof effect. This connector is durable and long lasting. This is a three-hole connector with two branches. It can be used outdoors and indoors, even if it is exposed to the sun and rain. At the same time, it can discharge air from each part in the ventilation project. It is small in size, so it doesn't take up space.
Vent Systems #ad - It is small in size, so it doesn't take up space. With the dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals. Finally, install the clamp and tighten the screw.
It can be used outdoors and indoors, even if it is exposed to the sun and rain. The duct connector is a three-hole - 3 way connector with two branches. The dryer duct connector is seamlessly connected to achieve a good leakproof effect.
MyLifeUNIT #ad - Don't worry about leaking air after installation. The duct connector is a three-hole connector with two branches. The dryer duct connector is seamlessly connected to achieve a good leakproof effect.
It is small in size, so it doesn't take up space. It can be used outdoors and indoors, even if it is exposed to the sun and rain. With the dryer vent connector can be connected to exhaust fans, dryer vent covers and vent seals.
Wipe the tee when using it, install the clamp and tighten the screw. The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. Finally, suitable for hoses of 4 inches 100 mm. Made of premium abs plastic, it is a material with high strength, good toughness and easy processing, no heavy metals.
With the dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals. The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance.
This connector is durable and long lasting. It is small in size, so it doesn't take up space. With the features of environmentally friendly, it is a material with high strength, even if it is exposed to the sun and rain. Made of high quality metal, safe and non-toxic. The dryer duct connector is seamlessly connected to achieve a good leakproof effect.
Crimped ends for easy installation and seal joints with approved duct mastic sealants. Easily add a new branch onto your ductwork, but don't forget the damper! Works with both flexible and rigid air conditioning ducts.
They are perfect fittings for maintaining maximum airflow through your system while branching off to multiple locations. Maybe crimped on outlets to fit into next metal ducting section and retaining ridge around all inlets and outlets to ensure a snug fit to the flexible duct. If you do not satisfy with our products, then please question us we will happily answer your question. Insulate Ductwork for improved energy efficiency and comfort. You should never feel any hesitation in contacting us.
We are willing for the satisfaction of our customers because customer satisfaction is our first priority. Sheet metal wye Branch for HVAC Duct. Wyes are made of 26-gauge, galvanized steel. Our ducts have made AC Repair and ventilation modification easy.
Easily add a new branch onto your ductwork, but don't forget the damper! Works with both flexible and rigid air conditioning ducts. Wye branches are the correct way to split your vent duct. We recommend that you seal the seams with a duct sealant after installation to prevent any air leakage, increase the efficiency of your system and reduce your utility bills. Crimped ends for easy installation and seal joints with approved duct mastic sealants.
POWERTEC #ad - To work with other 4” od pipes or adapters, such as POWETEC 70149 Flex Cuff, will be needed. Build: fittings is constructed out of rugged ABS plastic for abrasion resistance, toughness and long-term durability.
Features: fits inside dust collection hoses and secures with band clamps, easy-to-use and versatile design that accommodates a variety of dust collection systems and woodworking power tools with 4” ID ports. Dimensions: all three 4-inch nominal end measure 3-61/64 inch OD and 3-3/4 inch ID | Material Thickness: 1/8".
POWERTEC #ad - Function: connects 4” nominal ID dust hoses together to split to one or two machines, and then extend to other compatible machines.
Build: fittings is constructed out of rugged ABS plastic for abrasion resistance, toughness and long-term durability. Dimensions: all three 4-inch nominal end measure 3-61/64 inch OD and 3-3/4 inch ID | Material Thickness: 1/8 inch.
1. Repa Market
#adT Joint Metal 4'' Inch, T Shape, Y 45 Degree, Duct Splitter for Exhaust Fan Dryer Vent Hose 3 Way Duct Hose Connector
#adRepa Market #ad - With the dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals. With the features of environmentally friendly, it is a material with high strength, safe and non-toxic. Don't worry about leaking air after installation.The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. The use of our 3 way duct connector saves on construction costs and significantly reduces the overall cost compared to conventional cast iron connector of the same specification.
More information #ad
Made of high quality metal, good toughness and easy processing. The dryer duct connector is seamlessly connected to achieve a good leakproof effect. This connector is durable and long lasting. This is a three-hole connector with two branches. It can be used outdoors and indoors, even if it is exposed to the sun and rain. At the same time, it can discharge air from each part in the ventilation project. It is small in size, so it doesn't take up space.
| Brand | Repa Market #ad |
| Manufacturer | REPA MARKET #ad |
| Height | 3.93 Inches |
| Length | 10.61 Inches |
| Width | 8.41 Inches |
| Part Number | TV100-100 |
| Model | TV100-100 |
More information #ad
2. Vent Systems
#ad4 Inch 3 Way Fitting, Vent Systems 4'' Inch 45 Degree Duct Connector 3 Way Hose Adapter/Splitter for Hose T-Shape Round Pipe Connector- Extractor Fan, Duct Hose Dryer Vent T Connector
#adIt can be used outdoors and indoors, even if it is exposed to the sun and rain. The duct connector is a three-hole - 3 way connector with two branches. The dryer duct connector is seamlessly connected to achieve a good leakproof effect.
More information #ad
It is suitable for hoses of 100 mm 4 inch. At the same time, it can discharge air from each part in the ventilation project. The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. Wipe the tee when using it, then dock it with the hose and fix it with aluminum foil tape. Don't worry about leaking air after installation.| Brand | Vent Systems #ad |
| Manufacturer | Vent Systems #ad |
| Height | 3.93 Inches |
| Length | 10.61 Inches |
| Width | 8.41 Inches |
More information #ad
3. MyLifeUNIT
#adDuct Splitter for Exhaust Fan Dryer Vent Hose, MyLifeUNIT 3 Way Duct Connector, 4 Inch Dia. Y Shape
#adIt is small in size, so it doesn't take up space. It can be used outdoors and indoors, even if it is exposed to the sun and rain. With the dryer vent connector can be connected to exhaust fans, dryer vent covers and vent seals.
More information #ad
At the same time, it can discharge air from each part of the ventilation project. Dryer vent hose has a diameter of 3. 7 inches 95 mm per interface, then dock it with the hose and fix it with aluminum foil tape. Wipe the tee when using it, install the clamp and tighten the screw. The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. Finally, suitable for hoses of 4 inches 100 mm. Made of premium abs plastic, it is a material with high strength, good toughness and easy processing, no heavy metals.
| Brand | MyLifeUNIT #ad |
| Manufacturer | MyLifeUNIT #ad |
| Height | 3.77 Inches |
| Length | 6.96 Inches |
| Weight | 0.24 Pounds |
| Width | 6.18 Inches |
| Part Number | KT18XH072 |
| Model | KT18XH072-A |
More information #ad
4. Awenta
#adDuct Splitter for Exhaust Fan Dryer Hose, Y- Shape, Y Joint 4'' Inch, Y Shape Metal 3 Way Duct Hose Connector
#adAwenta #ad - It can be used outdoors and indoors, good toughness and easy processing. The use of our 3 way duct connector saves on construction costs and significantly reduces the overall cost compared to conventional cast iron connector of the same specification.With the dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals. The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance.
More information #ad
This is a 4'' inch three-hole connector with two branches. At the same time, it can discharge air from each part in the ventilation project. Don't worry about leaking air after installation. This connector is durable and long lasting. It is small in size, so it doesn't take up space. With the features of environmentally friendly, it is a material with high strength, even if it is exposed to the sun and rain. Made of high quality metal, safe and non-toxic. The dryer duct connector is seamlessly connected to achieve a good leakproof effect.
| Brand | Awenta #ad |
| Manufacturer | Awenta #ad |
More information #ad
5. The Sheet Metal Kid
#adGalvanized Sheet Metal Duct Connector, Airflow and Ventilation & Fully Adjustable Vent Pipe HVAC Ducting, Easy To Install, 4" x 4" x 4" Duct Wye Branch HVAC Ductwork AC Duct Fittings
#adThe Sheet Metal Kid #ad - Once it's in position can be sealed with a duct sealer. The wye branch fittings provide less friction and improved airflow. See installation tip for Flexible Duct or Sheet Metal Duct, depending on which type you will be attaching to. Our duct wyes branch is manufactured from the highest quality 26-gauge galvanized sheet metal.Crimped ends for easy installation and seal joints with approved duct mastic sealants. Easily add a new branch onto your ductwork, but don't forget the damper! Works with both flexible and rigid air conditioning ducts.
More information #ad
Ducting y adapter high-quality sheet metal air wyes duct fitting. Our ducts have made AC Repair and ventilation modification easy. They are used primarily to transition from 1 pipe to 2 pipes in heating and air conditioning applications. They are perfect fittings for maintaining maximum airflow through your system while branching off to multiple locations. Maybe crimped on outlets to fit into next metal ducting section and retaining ridge around all inlets and outlets to ensure a snug fit to the flexible duct. If you do not satisfy with our products, then please question us we will happily answer your question. Insulate Ductwork for improved energy efficiency and comfort. You should never feel any hesitation in contacting us.
| Brand | The Sheet Metal Kid #ad |
| Manufacturer | SHM Ducting #ad |
| Height | 4 Inches |
| Length | 10 Inches |
| Weight | 1 Pounds |
| Width | 8 Inches |
| Part Number | SHMTYS30P |
| Model | SHMTYS30P |
More information #ad
6. Imperial
#adImperial Manufacturing Duct Wye Galv 4 X 4 X 4In 30Ga GV0984
#adImperial #ad - Galvanized - Full Flow. Used primarily for heating & air conditioning applications for transition from one round pipe two. Size - 4 x 4 x 4 in. 30 gauge. Package Quantity: 1.More information #ad
| Brand | Imperial #ad |
| Manufacturer | IMPERIAL MFG GROUP #ad |
| Weight | 0.9 Pounds |
| Part Number | GV0984 |
| Model | ORGL76842 |
More information #ad
7. The Sheet Metal Kid
#adAirflow and Ventilation & Fully Adjustable Vent Pipe HVAC Ducting, Easy To Install, 4" x 3" x 3" Duct Wye Branch HVAC Ductwork AC Duct Fittings, Galvanized Sheet Metal Duct Connector
#adThe Sheet Metal Kid #ad - Good for sheet metal duct of flex duct alike. They are used primarily to transition from 1 pipe to 2 pipes in heating and air conditioning applications. If you do not satisfy with our products, then please question us we will happily answer your question.We are willing for the satisfaction of our customers because customer satisfaction is our first priority. Sheet metal wye Branch for HVAC Duct. Wyes are made of 26-gauge, galvanized steel. Our ducts have made AC Repair and ventilation modification easy.
More information #ad
Insulate Ductwork for improved energy efficiency and comfort. They are perfect fittings for maintaining maximum airflow through your system while branching off to multiple locations. Used for splitting supply, return or exhaust branch lines. Ducting y adapter high-quality sheet metal air wyes duct fitting. Easily add a new branch onto your ductwork, but don't forget the damper! Works with both flexible and rigid air conditioning ducts. Wye branches are the correct way to split your vent duct. We recommend that you seal the seams with a duct sealant after installation to prevent any air leakage, increase the efficiency of your system and reduce your utility bills. Crimped ends for easy installation and seal joints with approved duct mastic sealants.
| Brand | The Sheet Metal Kid #ad |
| Manufacturer | SMK #ad |
| Height | 12 Inches |
| Length | 12 Inches |
| Weight | 1 Pounds |
| Width | 6 Inches |
More information #ad
8. POWERTEC
#adPOWERTEC 70106 4-Inch Y-Fitting Dust Collection Hose Connector , Black
#adFeatures: fits inside dust collection hoses and secures with band clamps, easy-to-use and versatile design that accommodates a variety of dust collection systems and woodworking power tools with 4” ID ports. Dimensions: all three 4-inch nominal end measure 3-61/64 inch OD and 3-3/4 inch ID | Material Thickness: 1/8".
More information #ad
Function: connects 4” nominal id dust hoses together to split to one or two machines, a union, and then extend to other compatible machines. Please note: the nominal 4” od y-fitting is designed to work directly with 4” ID Flexible Dust Control Hoses. Includes: 4” dust Collection Hose Y-Fitting Connector. Please see the listed photos and video.| Brand | POWERTEC #ad |
| Manufacturer | POWERTEC #ad |
| Height | 4.25 Inches |
| Length | 9.8 Inches |
| Weight | 0.86 Pounds |
| Width | 8.6 Inches |
| Part Number | 70106 |
| Model | 70106 |
More information #ad
9. POWERTEC
#adPOWERTEC 70106V 4-Inch Y-Fitting Dust Collection Hose Connector, 1 Pack
#adBuild: fittings is constructed out of rugged ABS plastic for abrasion resistance, toughness and long-term durability. Dimensions: all three 4-inch nominal end measure 3-61/64 inch OD and 3-3/4 inch ID | Material Thickness: 1/8 inch.
More information #ad
Features: fits inside dust collection hoses and secures with band clamps, easy-to-use and versatile design that accommodates a variety of dust collection systems and woodworking power tools with 4” ID ports. Includes: 4” dust Collection Hose Y-Fitting Connector.| Brand | POWERTEC #ad |
| Manufacturer | POWERTEC #ad |
| Height | 4.2 Inches |
| Length | 9.8 Inches |
| Width | 8.6 Inches |
| Part Number | 70106V |
| Model | 70106V |
More information #ad
