As an Amazon Associate I earn from qualifying purchases.
SITERWELL #ad - No battery replacement requiredsmoke detector sealed 3v lithium battery, battery life of 10 years, smoke detector in the battery power will be low when the "squeak" warning, to avoid frequent battery replacement, accompanied by a red LED flashing.
When the battery life is exhausted, please replace the smoke detector. With a loud alarm tone about 85 decibels and a visible LED flashing, the permanent alarm device can warn you of any fire hazards. Quality services for your safe homeour products are UL listed, so use them with confidence.
Photoelectric technologysmoke alarms use photoelectric technology to provide faster response to all types of fires and reduce the incidence of false alarms. Press and hold the test button until the lED lights up, release the button within 2 seconds after the red light flashes and the unit will beep to indicate it is activated and ready for detection status.
SITERWELL #ad - Fault signal alarm: the photoelectric smoke alarm is very easily tested only by pressed the button more than 5 seconds, the low battery will have a signal alarm which will recall you to change a new battery. You won't worry about replacing the battery any more.
Smoke alarm won't work if activation fails. The smoke alarm don't contain any radioactive material and won't cause harm to human's body. And it can save energy and protect environment.
Certified safe and reliable: the smoke detector has passed UL certification, its quality is guaranteed. Activation before installation: press test button and hold it for more than 3 seconds until LED lights, and release it within 2 seconds, smoke detector will generate a “beep” indicating that it is successfully activated. 10 years life time: the smoke alarm can be 10 years life time and has 10 years life time non-repalced battery.
SITERWELL #ad - Lasting battery life10 year battery life smoke detector, longer service life, no need to replace, sealed installation of 3V lithium battery, environmental protection and saving. Loud alarm sound and flashing ledsmoke detectors within 3 meters alarm sound up to 85db, red LED lights make people unable to ignore, to assist the rapid processing of fire.
If the electronic circuit, and battery are working properly, horn, causing a fire in the building. Noteto test weekly, you may damage the alarm or ignite combustible materials, this will sound an alarm.
Test and mute buttonsmoke alarm with test button, LED light flashes, low battery/failure alarm sounds, you can test the function of the smoke alarm at any time, can be the first time in time to replace the new smoke alarm. Easy to installyou can choose to install the smoke detector with the included screws or with the 3M magnetic plate.
SITERWELL #ad - If the electronic circuit, this will sound an alarm. Do not use an open flame to test the alarm, and battery are working properly, horn, you may damage the alarm or ignite combustible materials, causing a fire in the building. Noteto test weekly, press the test button on the lid and hold it for at least 5 seconds.
Lasting battery life10 year battery life smoke detector, sealed installation of 3V lithium battery, longer service life, no need to replace, environmental protection and saving.
High-sensitivity fire detectionSmoke detector with photoelectric technology, through the UL certification, please rest assured that the use of the product. Test and mute buttonsmoke detector with test button, low battery/failure alarm sounds, LED light flashes, you can test the function of the smoke alarm at any time, can be the first time in time to replace the new smoke alarm.
SITERWELL #ad - In order not to disturb your rest, the product designs function of silence and no disturb. Test/silence button the smoke alarms design the test function by pressing the test button, used to test the product is working normal. Activation before installationpress test button and hold it for more than 3 seconds until LED lights, and release it within 2 seconds, smoke detector will generate a “beep” indicating that it is successfully activated.
Photoelectric technologythe smoke alarm pack has photoelectric technology, it's more sensitive to detecting slow smolder fires which general thick, black smoke and may smolder for hours before bursting into flames.
When the alarm send a fault signal, you must replace the product immediately. A weekly test is required. 10 years of lifethe smoke alarm has built-in 3v lithium battery which battery operated 10 year and warns you when the battery is low. Smoke alarm won't work if activation fails. It's easily to install on wall or ceiling. Easy installation & high qualitythe fire detector can easily install with mounting bracket.
SITERWELL #ad - Easy install & replacement battery: the smoke detector is 9V battery operated, which can be quickly replaced. There 2 expansion screws in the box to help you install the alarm. Safety clip feature: the photoelectric smoke detectors are not allowed mounting without battery install, so don't worry about the fire risk if you forget the battery.
Test button & low battery signal: the smoke alarm is easily to test by pressing the button more than 5 seconds.
Home protection: working smoke detector cut the risk of dying in a home fire by 50%, and that's important because a home fire starts every 83 seconds! The faster you realize a fire warning, the more time you can escape from the fire.
SITERWELL #ad - Mini size the smoke detector have been strictly tested before leaving the factory and passed UL217 safety certification. It has a small appearance and is easy to carry, it is perfect to place in children's room to ensure their safety. 10 hours interference-free mode in low battery condition to avoid unnecessary noise.
Photoelectric technology 10 year photoelectric smoke detectors are more sensitive in detecting slow burning fires that produce smoke. Easy to install smoke alarms do not require rewiring and can be easily installed on any wall or ceiling with the included mounting accessories（screws, anchor plugs, and mounting bracket or adhesive magnetic pad）.
Activation before installationfit the alarm on the bracket and turn the alarm body clockwise，until fully inserted on the bracket，the unit will generate a“beep” indicating that it is activated and ready to detect status. This unit must activated prior to installation. Failure to perform step will result in a non functioning smoke alarm. And it is more stable and suitable, high quality metal ring, with automatic sensitivity compensation function, 10 years battery provides long life operation.
SITERWELL #ad - 10-year battery smoke detector: the 10-year battery-operated fire alarm reduces the trouble of frequent battery replacement; keeps your family safe by providing reliable 24/7 uninterrupted protection, allowing you to sleep safe and sound.
Automatic activation: the rear cover of the smoke alarm has an activation button, when the rear cover is rotated and fixed, the detector will be activated. Easy to install: this mini smoke detector size is 2. 8 inches * 1. 3 inches, so it can be unobtrusively installed anywhere easily; effortlessly mount it onto any wall or ceiling using the included screws and anchor plugs.
The entire cover of the detector is the test button, which can be pressed directly with a broom without a ladder, avoiding danger. Big test button: it is especially suitable for the elderly or pregnant women who live alone.
1. SITERWELL
#adSuitable for Living Room/Home Fire Safety GS508C 4 Packs, 3V Sealed Battery UL217 Photoelectric Sensor with Mute Button and Test Button , SITERWELL Smoke Alarm 10 Years Battery Life
#adWhen the battery life is exhausted, please replace the smoke detector. With a loud alarm tone about 85 decibels and a visible LED flashing, the permanent alarm device can warn you of any fire hazards. Quality services for your safe homeour products are UL listed, so use them with confidence.
More information #ad
You can press the mute button when the detector makes a sound. Notebefore using the smoke detector, please complete the activation operation. Test/mute buttonthe smoke detector has a "test/silence" function so you can test the alarm at any time to make sure it is in good working order. Photoelectric technologysmoke alarms use photoelectric technology to provide faster response to all types of fires and reduce the incidence of false alarms. Press and hold the test button until the lED lights up, release the button within 2 seconds after the red light flashes and the unit will beep to indicate it is activated and ready for detection status.
| Brand | SITERWELL #ad |
| Manufacturer | Siterwell Electronics Co.,Limited #ad |
| Part Number | GS508C |
More information #ad
2. SITERWELL
#adSITERWELL Smoke Detector, UL Listed, GS526A, Fire Alarm with Built-in Battery and Fault Warning for Bedroom and House, 10-Year Smoke Alarm with Photoelectric Sensor and Low Battery Warning, 6 Packs
#adSmoke alarm won't work if activation fails. The smoke alarm don't contain any radioactive material and won't cause harm to human's body. And it can save energy and protect environment.
More information #ad
24 hours home protection: when the smoke detector is working, it will cut the risk of dying in a home fire by 50% while home fire starts every 83 seconds! The faster you know about a fire, the faster you can escape from the fire. Certified safe and reliable: the smoke detector has passed UL certification, its quality is guaranteed. Activation before installation: press test button and hold it for more than 3 seconds until LED lights, and release it within 2 seconds, smoke detector will generate a “beep” indicating that it is successfully activated. 10 years life time: the smoke alarm can be 10 years life time and has 10 years life time non-repalced battery.
| Brand | SITERWELL #ad |
| Manufacturer | SITERWELL ELECTRONICS CO.,LIMITED #ad |
| Height | 1.33 Inches |
| Length | 3.93 Inches |
| Width | 3.93 Inches |
| Part Number | GS526A |
| Model | GS526A |
More information #ad
3. SITERWELL
#adUL 217 2Packs, Fire Alarms with Low Battery and Fault Warning for Home, Smoke Alarms with Photoelectric Sensor and Test Button, SITERWELL Smoke Detector 10 Years Life Time Battery Operated
#adIf the electronic circuit, and battery are working properly, horn, causing a fire in the building. Noteto test weekly, you may damage the alarm or ignite combustible materials, this will sound an alarm.
More information #ad
Do not use an open flame to test the alarm, press the test button on the lid and hold it for at least 5 seconds. High-sensitivity fire detectionSmoke detector with photoelectric technology, through the UL certification, please rest assured that the use of the product. Test and mute buttonsmoke alarm with test button, LED light flashes, low battery/failure alarm sounds, you can test the function of the smoke alarm at any time, can be the first time in time to replace the new smoke alarm. Easy to installyou can choose to install the smoke detector with the included screws or with the 3M magnetic plate.
| Brand | SITERWELL #ad |
| Manufacturer | SITERWELL #ad |
| Height | 1.3 Inches |
| Length | 3.9 Inches |
| Weight | 0.74 Pounds |
| Width | 3.9 Inches |
| Part Number | GS526A |
| Model | GS526A |
More information #ad
4. SITERWELL
#adFire Alarms with Low Battery and Fault Warning for Home, SITERWELL Smoke Detector 10 Years Life Time Battery Operated, Smoke Alarms with Photoelectric Sensor and Test Button, UL 217 4 Packs
#adLasting battery life10 year battery life smoke detector, sealed installation of 3V lithium battery, longer service life, no need to replace, environmental protection and saving.
More information #ad
Easy to installyou can choose to install the smoke detector with the included screws or with the 3M magnetic plate. Loud alarm sound and flashing ledsmoke detectors within 3 meters alarm sound up to 85db, red LED lights make people unable to ignore, to assist the rapid processing of fire. High-sensitivity fire detectionSmoke detector with photoelectric technology, through the UL certification, please rest assured that the use of the product. Test and mute buttonsmoke detector with test button, low battery/failure alarm sounds, LED light flashes, you can test the function of the smoke alarm at any time, can be the first time in time to replace the new smoke alarm.
| Brand | SITERWELL #ad |
| Manufacturer | SITERWELL #ad |
| Height | 1.3 Inches |
| Length | 3.9 Inches |
| Width | 3.9 Inches |
| Part Number | GS526A |
More information #ad
5. SITERWELL
#ad10-Year Fire Alarm Smoke Detector with Built-in 3V Battery and Photoelectric Technology, GS508 , 2 Packs, Fire Detector with Low Battery Warning and Silence Fuction, SITERWELL Smoke Detector , UL217
#adPhotoelectric technologythe smoke alarm pack has photoelectric technology, it's more sensitive to detecting slow smolder fires which general thick, black smoke and may smolder for hours before bursting into flames.
More information #ad
Our products are ul certified, you can rest assured and have absolute trust in our products. When the alarm send a fault signal, you must replace the product immediately. A weekly test is required. 10 years of lifethe smoke alarm has built-in 3v lithium battery which battery operated 10 year and warns you when the battery is low. Smoke alarm won't work if activation fails. It's easily to install on wall or ceiling. Easy installation & high qualitythe fire detector can easily install with mounting bracket.
| Brand | SITERWELL #ad |
| Manufacturer | SITERWELL ELECTRONICS CO.,LIMITED #ad |
| Part Number | GS508C |
| Model | GS508C |
More information #ad
6. SITERWELL
#ad10-Year Life Time Fire Alarm with UL Listed, GS528A , Fire Safety for Kitchen,Home,Hotel, Smoke Alarm with Photoelectric Sensor and 9V Battery OperatedInclude, SITERWELL Smoke Detector , 4 Packs
#adTest button & low battery signal: the smoke alarm is easily to test by pressing the button more than 5 seconds.
More information #ad
If low battery there will be a signal alarm, which will recall you to change a new battery, then the smoke detectors will work as usual. 10 years life time: the smoke alarm have 10-year long lifenot the battery life time with loudly alarmLoud>85dB alarm signal at 3 meters, to make the room person can hear the alarm clearly when the smoke alarm is chirping, There will be enough time to leave from the dangerous. Home protection: working smoke detector cut the risk of dying in a home fire by 50%, and that's important because a home fire starts every 83 seconds! The faster you realize a fire warning, the more time you can escape from the fire.
| Brand | SITERWELL #ad |
| Manufacturer | SITERWELL ELECTRONICS CO.,LIMITED #ad |
| Part Number | GS528A |
More information #ad
7. SITERWELL
#ad10 Years Smoke Alarm with Photoelectric Sensor for Living Room and Bedroom, SITERWELL Mini Fire Alarm Smoke Detector, UL Listed 4 Packs
#adPhotoelectric technology 10 year photoelectric smoke detectors are more sensitive in detecting slow burning fires that produce smoke. Easy to install smoke alarms do not require rewiring and can be easily installed on any wall or ceiling with the included mounting accessories（screws, anchor plugs, and mounting bracket or adhesive magnetic pad）.
More information #ad
Test / mute buttonthe smoke detector battery operated with "test/silence" button, you can test the smoke alarm every week to see if it is working properly, when the detector makes a sound, press the silence button to stop the sound. Activation before installationfit the alarm on the bracket and turn the alarm body clockwise，until fully inserted on the bracket，the unit will generate a“beep” indicating that it is activated and ready to detect status. This unit must activated prior to installation. Failure to perform step will result in a non functioning smoke alarm. And it is more stable and suitable, high quality metal ring, with automatic sensitivity compensation function, 10 years battery provides long life operation.
| Brand | SITERWELL #ad |
| Manufacturer | SITERWELL #ad |
| Part Number | GS522C |
| Model | GS522C |
More information #ad
8. SITERWELL
#adSITERWELL Mini Smoke Alarm, GS522C-A, 10-Year Battery Fire Alarm Smoke Detector with LED Indicator & Silence Button, UL Listed, 1 Pack
#adAutomatic activation: the rear cover of the smoke alarm has an activation button, when the rear cover is rotated and fixed, the detector will be activated. Easy to install: this mini smoke detector size is 2. 8 inches * 1. 3 inches, so it can be unobtrusively installed anywhere easily; effortlessly mount it onto any wall or ceiling using the included screws and anchor plugs.
More information #ad
Higher security & compact size: featuring an upgraded smoke sensor with the latest in photoelectric technology, this smoke alarm responds to hazardous smoke quicker than traditional alarms with an over 85 dB loud alarm and a rapid flashing LED indicator, giving you extra time to control the fire or safely escape. The entire cover of the detector is the test button, which can be pressed directly with a broom without a ladder, avoiding danger. Big test button: it is especially suitable for the elderly or pregnant women who live alone.
| Brand | SITERWELL #ad |
| Manufacturer | SITERWELL ELECTRONICS CO.,LIMITED #ad |
More information #ad
