As an Amazon Associate I earn from qualifying purchases.

Soft set with no cure time: forms leak-free joints that can be tested and put into service immediately with no cure time required, and it holds tight against expansion, vibration, and contraction. Heavy duty: withstands temperatures from -200 degrees Fahrenheit to 500 degrees Fahrenheit, and it has a maximum working hydraulic pressure of 12, 000 PSI.





1. Rectorseal
#ad
Rectorseal 25790 1-3/4-Ounce Tube No.5 Pipe Thread Sealant
#adRectorseal #ad - A soft setting, slow drying thread sealant. Manufacturer: Rectorseal. Adhesives & Sealants. Country of manufacture: United States. It has withstood the test of time in a variety of uses and is widely known as the -Inchstandard of the industry-Inch.More information #ad
It is excellent for service where immediate pressurization is necessary. Its low coefficient of friction allows tighter joint makeup with lower torque. It also breaks out easily without galling, seizing, or damaging threads.Brand | Rectorseal #ad |
Manufacturer | The Rectorseal Corporation #ad |
Height | 5.5 Inches |
Length | 1.7 Inches |
Weight | 0.1 Pounds |
Width | 1.7 Inches |
Part Number | 25790 |
Model | 25790 |
More information #ad
2. Hercules
#ad
8 oz, White, Hercules 15620 Real-Tuff Heavy Duty PTFE Pipe Thread Sealant
#adHercules #ad - Compatibility: can be used on all metal, steam, and cpvc plastic lines carrying water, PVC, abs, and dilute acids, caustics, and it is suitable for use with all liquids and gases except for oxygen.Soft set with no cure time: forms leak-free joints that can be tested and put into service immediately with no cure time required, and it holds tight against expansion, vibration, and contraction. Heavy duty: withstands temperatures from -200 degrees Fahrenheit to 500 degrees Fahrenheit, and it has a maximum working hydraulic pressure of 12, 000 PSI.
More information #ad
Multi-purpose white ptfe thread sealant: Uses a unique system of fine-grain PTFE particles to fill cracks and thread imperfections. Easy to apply: brushable and non-separating for easy application, and it will not run or drip from joints.Brand | Hercules #ad |
Manufacturer | Standard Plumbing Supply #ad |
Height | 4.5 Inches |
Length | 2.3 Inches |
Weight | 0.88 Pounds |
Width | 2.3 Inches |
Part Number | 15620 |
Model | 15620 |
More information #ad
3. Rectorseal
#ad
Rectorseal 23631 1/4 Pint Brush Top T Plus 2 Pipe Thread Sealant
#adRectorseal #ad - It is excellent for service where immediate pressurization is necessary. It also breaks out easily without galling, seizing, or damaging threads. Manufacturer: Rectorseal. Its low coefficient of friction allows tighter joint makeup with lower torque.More information #ad
Adhesives & Sealants. Country of manufacture: United States. These fibers dispersed in a resinous base combined with inert mineral fillers provide maximum sealing performance. Non-hardening thread sealant containing PTFE plus synthetic fibers.Brand | Rectorseal #ad |
Manufacturer | The Rectorseal Corporation #ad |
Height | 3.5 Inches |
Length | 2.15 Inches |
Weight | 0.3 Pounds |
Width | 2.15 Inches |
Part Number | 23631 |
Model | GIDDS-441280 |
More information #ad
4. Loctite
#ad
1 Tube, Loctite Threadlocker Red 271 Red 0.2 fl oz
#adLoctite #ad - Easy and quick: sets in 10 minutes and fully cures in 24 hours. Prevents rust and corrosion: moisture-resistant formula protects from leaks, rusting, and corrosion and eliminates need to stock up on expensive lock nuts and washers. Permanent fix: permanent seal prevents tampering and is only removable once cured by heating parts up to 500°F 260°C.More information #ad
For large fasteners: heavy duty, high-strength formula for use on threads for nuts and bolts up to 1 inch 25mm. Lock and seal fasteners: Prevents loosening of metal fasteners caused by vibration on engines, machinery, and vehicles.Brand | Loctite #ad |
Manufacturer | Henkel #ad |
Height | 3.5 Inches |
Length | 0.63 Inches |
Weight | 0.01 Pounds |
Width | 0.63 Inches |
Part Number | 209741 |
Model | 209741 |
More information #ad
5. WM Harvey
#ad
WM Harvey 030005-144 Harvey Pipe Thread Compound, 1-1/4 Oz Pack, Off-Solid Stick
#adWM Harvey #ad - The item is wm harvey 030005-144 pipe thread stick. The product is manufactured in United States. Used for rough Plumbing, pipe and Conduit.More information #ad
Brand | WM Harvey #ad |
Manufacturer | WM Harvey #ad |
Height | 2.16 Inches |
Length | 6.01 Inches |
Width | 5.37 Inches |
Part Number | 030005-144 |
Model | 030005-144 |
More information #ad
6. Rectorseal
#ad
Yellow, Rectorseal 25551 8-Ounce No. 5 Pipe Thread Sealant
#adRectorseal #ad - Soft set slow drying compound which seals, lubricates and protects threaded pipe and fittings. Adhesives & Sealants. Can be pressurized immediately for piping up through 2" and 100 psi for natural gas, air and water only. Ideal for application with a wide variety of fluids and gases including potable water applications.More information #ad
Pipe thread sealant. Country of manufacture: United States. Manufacturer: Rectorseal. Recommended for use on threaded galvanized steel, stainless steel, iron, polyethylene, brass, copper, aluminum, fiberglass reinforced and PVC pipe.Brand | Rectorseal #ad |
Manufacturer | Rectorseal #ad |
Height | 3.7 Inches |
Length | 2.6 Inches |
Weight | 0.6 Pounds |
Width | 2.5 Inches |
Part Number | 25551 |
Model | 25551 |
Warranty | N |
More information #ad
7. Rectorseal
#ad
Rectorseal 23431 Pint Brush Top T Plus 2 Pipe Thread Sealant
#adRectorseal #ad - These fibers dispersed in a resinous base combined with inert mineral fillers provide maximum sealing performance. Manufacturer: Rectorseal. Non-hardening thread sealant containing PTFE plus synthetic fibers.More information #ad
Adhesives & Sealants. Its low coefficient of friction allows tighter joint makeup with lower torque. Country of manufacture: United States. It is excellent for service where immediate pressurization is necessary. It also breaks out easily without galling, seizing, or damaging threads.Brand | Rectorseal #ad |
Manufacturer | The Rectorseal Corporation #ad |
Height | 4.5 Inches |
Length | 3.2 Inches |
Weight | 1 Pounds |
Width | 3.2 Inches |
Part Number | 23431 |
Model | GIDDS-441282 |
Warranty | Rectorseal makes the Limited Express Warranty that when the instructions for storage and handling of our products are followed we warrant our products to be free from defects. |
More information #ad