As an Amazon Associate I earn from qualifying purchases.
1. SKILSAW #ad
SKIL 15 Amp 10 Inch Portable Jobsite Table Saw with Folding Stand- TS6307-00 #adSKILSAW #ad
- Integrated folding stand - Legs quickly fold in to provide portability and convenient storage. Parallel blade alignment - Available micro-adjustment of blade so that it is parallel to rip fence and miter slot. Dust port elbow - Redirects dust to a container for easy cleanup.
Rack and pinion fence rails - Ensures fence stays parallel to blade for fast smooth, and accurate cuts. 4x4 cutting capacity - cuts material up to 4x4 at 90 degrees. 2-47° bevel capacity - cuts between 2 positive stops at 0 and 45 degrees with quick release lever.
|Warranty||3 Year Limited Warranty|
2. Shop Fox #ad
Shop Fox W1837 10" 2 hp Open-Stand Hybrid Table Saw #adShop Fox #ad
- Shipping information: 2 Packages. Enclosed cabinet bottom with 4" dust port. Lift-off fence with front/rear locking ability. 2 hp, 120v/240v, single-phase motor prewired to run on a 120V, 20A circuit.
Ships in two boxes. Precision-ground cast iron table with steel wings measures 401/4" x 27". Rip capacity: 30" to right, 15" to left.
3. BOSCH #ad
BOSCH 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand 4100XC-10 #adBOSCH #ad
- Ripping capacity. Onboard storage: Allows for access to all included components. Soft-start circuitry: Manages intensity of motor start-up and minimizes the likelihood possibility of tripping a circuit breaker. Arbor lock: permits easy blade changes, with arbor lock and blade wrench located onboard.
Large cast aluminum top: Provides increased work space and material support with a 30 In. Smart guard system: riving knife and anti-kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut.
Restart protection: Helps to avoid accidental startup.
Constant response circuitry: Helps maintain speed under load. Powerful table saw: has 15-amp saw with 4. 0 max hp and 3, 650 rpm, for rip-cutting and cross-cutting of fine and rough materials. Squarelock rip fence: Engineered for enhanced clamping and trueness. Portability: works seamlessly with the included lighter GTA47W Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down.
4. Metabo HPT #ad
Metabo HPT 10-Inch Miter Saw | Single Bevel | Compound | 15-Amp Motor | C10FCGS #adMetabo HPT #ad
- To facilitate maneuverability and portability. Thumb actuated positive stops: For quick miter adjustments. Lightweight: only 24. 2 lbs. Bevel range: 0-45 degrees, to the left with adjustable bevel stops for precision cuts.
Electric brake: Halts the rotation of the blade within seconds preventing unintended cuts. Maximum output : 1, 950 W. Miter angle range: 0-52 degrees, to the right and left for increased flexibility.
Motor: 15 amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5, 000 RPM. Horizontal handle: For a secure hold. Warranty: covered by metabo HPT's Professional 5-Year Tool Warranty. Large table: offers better material support with vice clamping system to secure work piece.
5. Skil #ad
Skil 10" Dual Bevel Sliding Compound Miter Saw, MS6305-00 #adSkil #ad
- Powerful 15 amp motor - delivers 4, 800 RPM for quick, detailed cuts. Led shadow line - Provides high precision cuts with greater accuracy than lasers. 2x12 cutting capacity – cross cuts lumber up to 2x12 at 90 degrees, and 2x8 lumber at 45 degrees.
Cuts at common angles - cuts up to 50 degrees left and right with 11 positive stops at most used angles. Dual bevel – perform cuts in four positive stop positions at 48° & 45° left, 0°, and 45° right.
|Warranty||3 Year limited warranty|
6. Rockwell #ad
Rockwell RK7323 BladeRunner X2 Portable Tabletop Saw with Steel Rip Fence, Miter Gauge & 7 Accessories #adRockwell #ad
- Sets up in seconds take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle. On-board accessory storage when the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw.
Safety switch prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut. 0-60° miter cuts with the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects.
Cuts like a full-size with the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts. Tool-less blade change uses any brand’s standard 4” t-shank blade, aluminum, plastic, but we threw 5 in the box to get you started cutting wood, ceramic tile, and metal.
|Manufacturer||Positec USA #ad|
|Warranty||3 year Limited Consumer Warranty|
7. DEWALT #ad
Compact, 8-1/4-Inch DWE7485, DEWALT Table Saw for Jobsite #adDEWALT #ad
- Power: 15 amp, 5800 rpm motor. Variety of cuts: 24. 5 inches of rip capacity for ripping 4x8 plywood or OSB sheets. Portability: Compact size for ease of transportation and storage. Easy adjustments: rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate.
Guaranteed tough: Metal roll cage ensures job site durability. Onboard storage: onboard storage provides easy access to the site pro guarding components and push stick when not in use.
8. DEWALT #ad
DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity DWE7491RS #adDEWALT #ad
- Your purchase includes one dewalt table saw, rip fence, 10inch 24-tooth carbide blade, push stick, miter gauge, 2x blade wrenches, rolling stand, blade guard assembly manual.
Other specs: max rip to left of blade – 22inch | max rip to right of blade – 32-1/2inch | max width of dado – 13/16inch | arbor size – 5/8inch | Amps – 15 | Depth of cut at 45inch – 2-1/4inch | Depth of cut at 90° – 3-1/8inch | No Load Speed: 4800 RPM.
Features a 15. 0a high torque motor with the power to cut pressure treated lumber and hardwoods. Rack & pinion telescoping Fence System Make fence adjustments fast, smooth and accurate. Rolling stand designed for easy set up and breakdown with excellent stability.
|Warranty||3 year limited manufacturer warranty|
9. Skil #ad
SKIL SPT99T-01 8-1/4 Inch Portable Worm Drive Table Saw #adSkil #ad
- Light weight and compact footprint make it easy to move around the jobsite. Legendary worm drive gearing offers maximum torque for ripping applications. Precision rack and pinion system makes fence adjustments quickly and smoothly for accurate cuts.
Tear through sheet goods and slice up to 3x with the 2-5/8 inch depth of cut and 25 inch rip capacity. All-metal construction delivers legendary durability.
|Warranty||180 Day Stay True Guarantee + 1 Year limited warranty|
10. Metabo HPT #ad
No Battery | C3610DRJQ4, Metabo HPT 36V MultiVolt™ Cordless Table Saw | 10-Inch Blade | Tool Only #adMetabo HPT #ad
- Easy adjustments: blade height or angle, as well as simple fence adjustments to adhere to the cutting material. Motor: 36v brushless motor produces 5, 000 RPM to power through the toughest ripping applications.
Technology: Featuring soft star and electric brake. Bevel: 0 to 45 degrees for cuts ranging from 3-1/8 In to 2-1/4 In. Blade: 10-in 40-tooth carbide tipped blade included for high cutting capacity.
Multivolt technology: easily switch between a MultiVolt 36V battery or the MultiVolt AC adapter both sold separately. Rip capacity: highest rip Capacity for a Cordless Table Saw at 35-in. Table size: largest working table saw size of 35-in of ripping capacity to the right and 22-in to the left.