Top 10 TOGGLER SNAPTOGGLE Drywall Anchor – Kitchen & Dining Features

As an Amazon Associate I earn from qualifying purchases.

1. TOGGLER

#ad

TOGGLER SNAPTOGGLE Drywall Anchor with Included Bolts for 1/4-20 Fastener Size; Holds 80 pounds Each in 1/2-in Drywall by TOGGLER 12 Pack

#adTOGGLER #ad - Holds 2x more than wing toggles - snaptoggles holds up to 1, 080 lbs in concrete block and up to 265 lbs in 1/2-in drywall Industry standards recommend 1/4 of this ultimate load per anchor.

Can be used with Drywall, and More. Not included. Smallest drill hole - Requires a 1/2-in drill bit. Great for hanging flat screen tv's, handrails, Plaster, Concrete Blocks, Tile, grab bars, cabinets and much more. Package contains 12 anchors and 12 bolts Bolts are 2. 5 inches - Packaging may Vary. Reusable - metal channel will not fall behind wall - anchor is reusable and works in walls or ceilings 3/8-in to 3-5/8-in thick.

Brand	TOGGLER #ad
Manufacturer	TOGGLER #ad
Part Number	24200-Set 12
Model	12 Pack Toggler

2. TOGGLER

#ad

TOGGLER SNAPTOGGLE BA Toggle Anchor, For 3/16"-24 UNC Fastener Size Pack of 50, 3/8" to 3-5/8" Grip Range, Zinc-Plated Steel Channel, Made in US

#adTOGGLER #ad - In concrete block with a 3/16"-24 UNC bolt. Ultimate tensile strength is 238 lb. Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material. In 1/2" drywall and 802 lb. Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes. Use one-fourth or less of listed maximum values for safe working loads as required by local regulations. Made in usa, and works with 3/16"-24 UNC-threaded metal bolts sold separately.

Brand	TOGGLER #ad
Manufacturer	Mechanical Plastics Corp. #ad
Height	3 Inches
Length	9 Inches
Width	6 Inches
Part Number	25013
Model	25013

3. TOGGLER

#ad

3/8" to 3-5/8" Grip Range, For 3/16"-24 UNC Fastener Size Pack of 10, TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US

#adTOGGLER #ad - Ultimate tensile strength is 238 lb. In 1/2" drywall and 802 lb. In concrete block with a 3/16"-24 UNC bolt. Use one-fourth or less of listed maximum values for safe working loads as required by local regulations. Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material. Made in usa, and includes 3/16"-24 UNC-threaded bolts. Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.

Brand	TOGGLER #ad
Manufacturer	Mechanical Plastics Corp. #ad
Height	12 Inches
Length	10.4 Inches
Weight	0.4 Pounds
Width	7.75 Inches
Part Number	50375
Model	50375

4. TOGGLER

#ad

Glass-Filled Nylon, Made in US, For #6 to #10 Fastener Sizes Pack of 100, TOGGLER SnapSkru SP Self-Drilling Drywall Anchor

#adTOGGLER #ad - Self-drilling anchor installs into 3/8"- to 5/8"-thick drywall ceilings and walls without requiring a predrilled hole. Glass-filled nylon body has jaws that open to provide a firm vibration- and shock-resistant hold when a screw is inserted. In 1/2" drywall with a #8 x 1-1/2" screw. Made in usa, and works with #6 to #10 size screws sold separately. Use one-fourth or less of listed maximum values for safe working loads as required by local regulations. Ultimate tensile strength is 79 lb.

Brand	TOGGLER #ad
Manufacturer	Mechanical Plastics Corp. #ad
Height	5.12 Inches
Length	5.28 Inches
Weight	0.57 Pounds
Width	2.99 Inches
Part Number	30011
Model	104460858

5. TOGGLER

#ad

For 3/16"-24 UNC Fastener Size 2 Packs of 10, Made in US, Toggler Snapptoggle BA Toggle Anchor with Bolts, Zinc-Plated Steel Channel, 3/8" to 3-5/8" Grip Range

#adTOGGLER #ad - In 1/2" drywall and 802 lb. Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes. Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material. Use one-fourth or less of listed maximum values for safe working loads as required by local regulations. In concrete block with a 3/16"-24 UNC bolt. Made in usa, and includes 3/16"-24 UNC-threaded bolts. Ultimate tensile strength is 238 lb.

Brand	TOGGLER #ad
Manufacturer	TOGGLER #ad
Part Number	50375
Model	50375

6. TOGGLER

#ad

For 3/16"-24 UNC Fastener Size Pack of 100 anchor, 3/8" to 3-5/8" Grip Range, TOGGLER SNAPTOGGLE BA Toggle Anchor, Made in US, with out bolts, Zinc-Plated Steel Channel

#adTOGGLER #ad - Use one-fourth or less of listed maximum values for safe working loads as required by local regulations. Made in usa, and works with 3/16"-24 UNC-threaded metal bolts sold separately. In concrete block with a 3/16"-24 UNC bolt. In 1/2" drywall and 802 lb. Ultimate tensile strength is 238 lb. Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material. Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.

Brand	TOGGLER #ad
Manufacturer	Mechanical Plastics Corp. #ad
Height	6 Inches
Length	9 Inches
Weight	3.5 Pounds
Width	6 Inches
Part Number	24013
Model	24013

7. TOGGLER

#ad

TOGGLER SNAPTOGGLE BBS Toggle Anchor, Made in US, 304 Stainless Steel Channel, 3/8" to 3-5/8" Grip Range, For 1/4"-20 UNC Fastener Size Pack of 100

#adTOGGLER #ad - Ultimate tensile strength is 265 lb. Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material. In concrete block with a 1/4"-20 UNC bolt. Made in usa, and works with 1/4"-20 UNC-threaded metal bolts sold separately. In 1/2" drywall and 1, 080 lb. Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes. Use one-fourth or less of listed maximum values for safe working loads as required by local regulations.

Brand	TOGGLER #ad
Manufacturer	Mechanical Plastics Corp. #ad
Weight	2.5 Pounds
Part Number	24021
Model	24021

8. TOGGLER

#ad

For 3/16"-24 UNC Fastener Size Pack of 100, TOGGLER SNAPTOGGLE BAS Toggle Anchor, Made in US, 304 Stainless Steel Channel, 3/8" to 3-5/8" Grip Range

#adTOGGLER #ad - Made in usa, and works with 3/16"-24 UNC-threaded metal bolts sold separately. In concrete block with a 3/16"-24 UNC bolt. Ultimate tensile strength is 238 lb. Use one-fourth or less of listed maximum values for safe working loads as required by local regulations. Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes. Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material. In 1/2" drywall and 802 lb.

Brand	TOGGLER #ad
Manufacturer	Mechanical Plastics Corp. #ad
Weight	2.5 Pounds
Part Number	24020

9. TOGGLER

#ad

For #6 to #8 Fastener Sizes Pack of 6, TOGGLER SnapSkru SPM Mini Self-Drilling Drywall Anchor with Screws, Glass-Filled Nylon, Made in US

#adTOGGLER #ad - Made in usa, and includes #6 x 1-1/4" screws. Self-drilling anchor installs into drywall ceilings and walls without requiring a predrilled hole. Use one-fourth or less of listed maximum values for safe working loads as required by local regulations. Ultimate tensile strength is 65 lb. In 1/2" drywall with a #6 x 1-1/4" screw. Glass-filled nylon body has jaws that open to provide a firm vibration- and shock-resistant hold when a screw is inserted.

Brand	TOGGLER #ad
Manufacturer	Mechanical Plastics Corp. #ad
Height	0.4 Inches
Length	6.8 Inches
Weight	0.08 Pounds
Width	4 Inches
Part Number	50150
Model	50150

10. TOGGLER

#ad

Made in US, TOGGLER SnapSkru SPM Mini Self-Drilling Drywall Anchor with Screws, For #6 to #8 Fastener Sizes Pack of 50, Glass-Filled Nylon

#adTOGGLER #ad - Self-drilling anchor installs into 3/8"- to 5/8"-thick drywall ceilings and walls without requiring a predrilled hole. Ultimate tensile strength is 65 lb. Glass-filled nylon body has jaws that open to provide a firm vibration- and shock-resistant hold when a screw is inserted. Use one-fourth or less of listed maximum values for safe working loads as required by local regulations. In 1/2" drywall with a #6 x 1-1/4" screw. Made in usa, and includes #6 x 1-1/4" screws.

Brand	TOGGLER #ad
Manufacturer	Mechanical Plastics Corp. #ad
Height	2.7 Inches
Length	5.1 Inches
Weight	0.45 Pounds
Width	2.9 Inches
Part Number	30032
Model	30032