Top 10 Scratch Awl Leather – Sewing Tailors Awl

As an Amazon Associate I earn from qualifying purchases.

1. General Tools


Alloy Steel Blade, General Tools Scratch Awl Tool with Hardwood Handle, & Piercing Wood, Scribe, Layout Work

General Tools #ad - Awls with rounded points can mark the location of holes that will later be made more prominent with a hole punch. General tools: we're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service.

Craft awl: this handy needle tool can help you create your next woodworking masterpiece. Awl punch: the hand-held tool features a steel blade through the grip and is fastened to a plated steel ferrule and cap. Drag the tip of the awl along the grain of the wood, creating a shallow groove, reducing the chances of the hand saw or chisel from wandering across the board. We encourage artisans and DIYers to work smarter, measure better, and repair more productively. It features a sharp point and a contoured and fluted wooden handle used by carpenters and other artisans.

Marking awl: it only takes a few seconds to use an awl scratch to make a starting point for a drill bit, which is much less time than it would take to sand out any damage. Our pocket awl can withstand heavy pressure and challenging workloads. Wooden handle awl: our craft piercing tool is rust-resistant and can be used for punching, screwing holes, scribing, and perforating wood.
BrandGeneral Tools #ad
ManufacturerGeneral Tools #ad
Height3.25 Inches
Length8.75 Inches
Weight0.16 Pounds
Width3.75 Inches
Part Number818

2. C.S. Osborne


C.S. Osborne Scratch Awl Haft

C.S. Osborne #ad - This sharp pointed tempered blade is perfect for piecing leather, sewing, and a variety of your other projects. Best steel blades and rugged plastic handles. Perfect for piercing leather, sewing, and a variety of your other projects.
BrandC.S. Osborne #ad
ManufacturerWeaver Leather, LLC #ad
Height9.25 Inches
Length1.5 Inches
Weight0.28 Pounds
Width2.5 Inches
Part Number4-4

3. Klein Tools


Klein Tools 650 Scratch Awl with 3-1/2-Inch Shank and Cushion Grip

Klein Tools #ad - Cushion-grip handle allows for greater comfort. Made in USA. Internal flanges provide solid shank anchor. Professional, heavy-duty, hard-pointed awl scribes metal, starts screw holes, performs a variety of piercing and punching jobs. Rigid, chrome-plated, heat-treated, tempered-steel shank has full reinforcing bolster at handle for extra strength and for handle impact reinforcement.
BrandKlein Tools #ad
ManufacturerKlein #ad
Height1.97 Inches
Length12.2 Inches
Weight0.25 Pounds
Width4.41 Inches
Part Number650
WarrantyKlein offers a lifetime warranty on material defects and workmanship for the normal life of the product.

4. Malco


Malco A0 USA Made Regular Grip Scratch Awl, 1/8-inch 1 per Pack

Malco #ad - Durable long lasting tool. Comfortable grip. Easy to spot orange handles. Steel blades can be resharpened.
BrandMalco #ad
ManufacturerMalco #ad
Height0.75 Inches
Length6.25 Inches
Weight0.08 Pounds
Width0.75 Inches
Part NumberA0
WarrantyLimited Lifetime

5. Klein Tools


3-1/2-Inch, Klein Tools 66385 Steel Scratch Awl

Klein Tools #ad - Heat treated for long life. Black finish for rust resistance. Well-balanced for top efficiency during use. One-piece forged-steel blade and bolstered shank. Made in the USA.
BrandKlein Tools #ad
ManufacturerKlein #ad
Height1 Inches
Length1 Inches
Weight0.3 Pounds
Width1 Inches
Part Number66385
Warranty1 Year Manufacturer



TEKTON Scratch and Punch Awl | 65731

TEKTON #ad - Handle profile resists rolling on inclines up to 20 degrees. Versatile low-angle tip offers an optimal combination of sharpness and strength. Works as a scribe, hand punch, and hole starter for wood, concrete, metal, tile, and plastic. Stout 1/4-inch diameter blade is made of premium chrome molybdenum steel. Made in USA. Unique three-sided handle with a soft, nonslip grip gives you complete control.
BrandTEKTON #ad
ManufacturerTEKTON #ad
Height1.5 Inches
Length6.8 Inches
Weight0.16 Pounds
Width1.5 Inches
Part Number65731
WarrantyAlways Guaranteed: [email protected]

7. Southwire


Southwire Tools & Equipment AWL001 Scratch Awl

Southwire #ad - Country of origin: China. Heavy duty Chrome plated stainless steel shaft. Designed to exceed ASME/ANSI specifications. Cushion grip handles for comfort and use.
BrandSouthwire #ad
ManufacturerSouthwire Company #ad
Height1.12 Inches
Length6.75 Inches
Weight0.2 Pounds
Width1.12 Inches
Part Number58283640

8. C.S. Osborne


5-1/2 Inch 4 Scratch AWL Blade

C.S. Osborne #ad - Overall length : 7-3/4". Osborne heavy Duty Scratch Awl. Blade length : 5-1/2". C. S. Best quality steel blades with rugged amber translucent cellulose acetate handles. Size : 4.
BrandC.S. Osborne #ad
ManufacturerC. S. Osborne & Co. #ad
Height0.6 Inches
Length11 Inches
Weight0.3 Pounds
Width2.1 Inches
Part Number4-4

9. Mayhew


Mayhew Select 46502 5-1/2-Inch Blade 6-1/4-Inch OAL 1/4-Inch Scratch Awl , Black

Mayhew #ad - Package Quantity: 1. Country of Origin: China. Package dimensions: 19. 812 cm l x 4. 318 cm w x 3. 555 cm H. Model number: 46502. Package Type: Tools.
BrandMayhew #ad
ManufacturerMayhew #ad
Height1 Inches
Length6.25 Inches
Weight0.05 Pounds
Width1 Inches
Part Number46502

10. Taytools


Japanese Style Max Size Awl Hardwood Handle Hardened High Carbon Steel Blade Very Sharp Point 5-1/2 Inches Long.990 Inches Diameter JAMAX

Taytools #ad - Hardwood handle. Hardened high carbon tool steel blade. Tip sharpened to very fine point. This larger size can be comfortably cupped in the hand for better control when doing precise work. Larger size at 5. 5” long by. 900” in diameter.
BrandTaytools #ad
ManufacturerTaylor Toolworks #ad
Height1.3 Inches
Length6.5 Inches
Width1.3 Inches
Part NumberJA-MAX