Top 10 Router Plate Insert Rings – Routers

As an Amazon Associate I earn from qualifying purchases.

1. JessEm

#ad

JessEm 02120 Mast-R-Lift II Router Lift with Top Plate and 10-Piece Insert Ring Kit with Caddy for Router Plates and Lift Systems 2 Items

#ad
JessEm #ad - Compatibility: with a standard top plate, mast-R-Lift II fits routers with 9-1/4-inch by 11-3/4-inch base using a unique adjustable clamping block system. Lift shafts: the lift shafts are hydraulically pressed into a larger diameter mount.

Attaching the shaft mount to the top plate spreads the lateral load, providing a very rigid and durable mount, standing up to the toughest of routing operations. Bundle includes: jessem 02120 mast-r-lift ii router lift with 9-1/4-inch by 11-3/4-inch Top Plate and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems. Using the same handle you raise and lower your router lift, a simple turn and you are ready for those heavy-duty, long term routing operations.

Hard anodizing is an engineered surface treatment providing a thick abrasion resistant coating and not just a cosmetic treatment that will wear off. Sturdy construction: mast-r-lift ii top plate is hard anodized. Built-in locking mechanism: mast-r-lift ii has a built-in locking mechanism from above the table.
BrandJessEm #ad
ManufacturerJessEm #ad
Height12.7 Inches
Length18.2 Inches
Weight1.8 Pounds
Width14.2 Inches
Part Number02120-JESSEM_K1
Model02120-JESSEM_K1

2. JessEm

#ad

JessEm 02310 Rout-R-Lift II Router Lift and 02030 10-Piece Insert Ring Kit with Caddy Bundle 2 Items 0231002030

#ad
JessEm #ad - Bundle includes: jessem rout-r-lift ii router lift for porter cable, dewalt and Bosch Routers with 3. 5" diameter motors and jessem 10-piece Insert Ring Set with Caddy for Router Plates and Lift Systems.

Sturdy construction: all the machined components on the Rout-R-Lift II are CNC machined for durability. Double-sealed ball bearing: thanks to the a double sealed bearing to the spindle, the Rout-R-Lift II can smoothly raise and lower your motor with ease. Lift shafts: the shafts are attached to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations. Compatibility: this model is designed for use with porter cable 690/890, DW 610/616/618, Bosch 1617/1618, or any other routers with 3.5" diameter motors.
BrandJessEm #ad
ManufacturerJessEm #ad
Height12.4 Inches
Length18.5 Inches
Weight10.7 Pounds
Width14 Inches
Part Number02310-JESSEM_K1
Model0231002030

3. Rockler

#ad

9-1/4'' x 11-3/4'' Large Router Plate – Router Lift Kit For Kreg, & Set of Hex Keys, Jessum, Insert Ring, Woodpecker & Peachtree, Router Lift Systems w/Router Plate, Rockler Pro Lift Router Lift

#ad
Rockler #ad - Easy router bit changes: raise your router table fast with the Quick-Gear, then down-shift to the precision gear for fine adjustments—Snap-Lock insert ring for easy bit changes. Optional attachments like the 3-1/4'' pro lift adapter Collar & the 3-1/2'' Pro Lift Adapter Collar allow you to fit other router sizes sold separately.

All this is achieved more quickly, more efficiently, and more intuitively with the router lift plate. What’s included? our pro lift includes 1 rockler pro lift router lift, 1 Router Ring 1-1/2'' I. D. 1 aluminum router plate 3/8'' thick, 1 Set of hex keys on a key chain.

Fits most routers: this woodworking router table works with router motors with a 4. 2'' diameter 13. 85'' circumference, like the Porter-Cable 7518 and 7519. Our rockler router lift 9. 25” x 11. 75” plate is ideal for Kreg, Jessum, Woodpecker and Peachtree tables. Adjust the height: use the fine adjustment gear to set the final height to within 0001''. Other plate sizes available separately.
BrandRockler #ad
ManufacturerRockler #ad
Height0 Inches
Length11.02 Inches
Width9.06 Inches

4. Rockler

#ad

Rockler Pro Router Lift 8-1/4'' x 11-3/4'' Plate – Kit Includes Aluminum Router Plate, Set of Hex Keys on Key Chain, Easy to Install Router Lift Systems, Woodworking Router Table, Insert Ring

#ad
Rockler #ad - Woodworking router lift: two patent-pending features raise the Rockler router table insert plate with lift into a class of its own: ultra-fast ''Quick-Gear'' height adjustments and ''Snap-Lock'' tool-free insert ring changes.

No tools to search for: push the button to release the insert ring, then wind the Quick-Gear to raise the bit above the router lift table in just seconds. What’s included? this router lift kit includes 1 rockler pro lift router Lift, 1 Insert ring 1-1/2'' I. D. 1 aluminum router plate 3/8'' thick, and 1 Set of hex keys on a key chain. Use the adjustment gear: once the bit is installed, and click in the insert ring, quickly lower it, and use the fine adjustment gear of our lift pro router to set the final height to within 0.0

001''. Our router table mounting plate has a snap-Lock insert ring for easy bit changes. No tools to search for and no screws to lose. Easy bit changes: raise your router table fast with the Quick-Gear, then down-shift to the precision gear for fine adjustments.
BrandRockler #ad
ManufacturerRockler #ad
Height0.01 Inches
Length11 Inches
Width1 Inches

5. O'SKOOL

#ad

O'SKOOL Precision Aluminum Router Table Insert Plate, Router Templates With Pre-Drilled Adapt to Multiple Routers of Different Models

#ad
O'SKOOL #ad - Contents: package includes 1 router plate, 1 4mm allen wrench hex key, 4 hex socket button head screw, 1 3mm allen wrench hex key, 1 start pin, 5 insert ring, and 10 leveling screws. The rings : 3/8", 1-7/8", 1”, 2-5/8”, and 1-1/4" brass bushing dedicated.

Pre-drilled: this aluminum router plate come with pre-drilled to fit multiple models of routers. The screws of oval mounting holes can be adjusted to suitable positions according to the locations of the router table style holes, then lock them in place. Simple to use: the plate is equipped 5 versions of insert rings that allow you to easily change the size of the opening around the router bit. High durability: the dimensions of the plate is 9-1/4" x 11-3/4" x 3/8", and the plate is made of high-quality aluminum alloy, with good wear resistance and durability, and long service life.

Adjust balance: leveling screws can be adjusted the top and bottom flatness of the router plate and router table. They can be used flexibly with a suitable router bit. These rings simply twist into place using an included ring wrench to lock in level and flush with the plate surface.
BrandO'SKOOL #ad
ManufacturerO'skool #ad
Part NumberRTS02

6. KREG

#ad

Kreg PRS4034 Precision Router Table Insert Plate w/Level-Loc Rings, Compatible with Triton

#ad
KREG #ad - Alignment marks make it easy to center and mount on almost any router. Measures 9-1/4" x 11-3/4" 235mm x 298mm; 3/8" thick 9. 5mm phenolic insert plate. With modification, hole pattern works for Porter-Cable 7500 Series. Comes predrilled holes and mounting hardware to fit Triton M0F001 and TRA001 Routers.
BrandKREG #ad
ManufacturerKreg Tool Inc #ad
Height0 Inches
Length11 Inches
Weight2.8 Pounds
Width4 Inches
Part NumberPRS4034
ModelPRS4034

7. SSEHCWAN

#ad

300 X 235 X 9.5mm, Router Table Insert Plate Aluminum Router Insert Plate Woodworking Router Table Mounting Plate with 2 X Router Table Insert Ring and Screws for Wood Trimmer Router

#ad
SSEHCWAN #ad - The product video is in the position of the seventh picture. The unit of measurement is millimeters. Smooth surface - the ssechwan router table insert plate is made of very good quality aluminium material. It has a machine finished smooth surface, to guarantee the work piece would slide better.

Woodworking assistant - our router table insert plate has two different red covers to accommodate different bit sizes. The detailed size is on the second picture. What you will get - 1 x aluminum router table insert plate 300 x 235 x 9. 5mm, a package of screws, 2 x red insert rings to fit different bits sizes, hexagonal wrench and our 100% Customer Satisfaction Guaranteed. 100% money refund or replace for you if you are not satisfied, lifting and lowering adjustment lever, please buy with confidence.

This aluminum router mounting plate is suitable for most trimming routers, please note the size before purchasing. Checking size warning!!! the size of the router board is 300mm x 235mm x 9. 5mm. Please check our board size to make sure it matches your router. There are inch and centimeter measurements on the face of the board, and the bits are positioned at 0 Router lift design- your router bit can be raised and lowered smoothly and easily with the lift adjustment lever.
BrandSSEHCWAN #ad
ManufacturerSSEHCWAN #ad
Part NumberSSEHCWAN

8. Woodpeckers

#ad

8-Piece, Woodpeckers Precision Woodworking Tools TLRSET-ML Molded Twist Lock Ring Set for Router Lift or Plate

#ad
Woodpeckers #ad - Includes a blank ring which can be drilled or routed for a custom size. Custom made holder included. This clearance is enough to allow for air flow as well as stock support while routing. Set includes: solid, 7/8-inch, 1-7/8-inch, 3/4-inch, 1-3/8-inch, 2-1/8-inch, 1-5/8-inch, and 2-3/8-inch. For ideal stock support, it's recommended that the router bit opening be approximately 1/8" to -1/4" larger than the bit diameter.
BrandWoodpeckers #ad
ManufacturerWoodpeckers Inc. #ad
Height4.5 Inches
Length6 Inches
Weight1 Pounds
Width4.5 Inches
Part NumberTLRSET-ML
ModelTLRSET-ML

9. KREG

#ad

Kreg PRS4038 Precision Router Table Insert Plate w/Level-Loc Rings, Undrilled

#ad
KREG #ad - Comes without any predrilled mounting holes. Measures 9-1/4" x 11-3/4" 235mm x 298mm; 3/8" thick 9. 5mm phenolic insert plate. Alignment marks make it easy to center and mount on almost any router.
BrandKREG #ad
ManufacturerKreg Tool Inc #ad
Height0 Inches
Length11 Inches
Weight0.15 Pounds
Width4 Inches
Part NumberPRS4038
ModelPRS4038

10. LYHLYA

#ad

Aluminium Router Table Insert Plate Table for Woodworking Benches Router Plate Wood Tools Milling Trimming Machine with Rings Red 13inches

#ad
LYHLYA #ad - Warning!!! the size of our router board is  11. 8 x 9. 25in / 300 x 235mm. Please check your board size to make sure it matches your router.

The detailed size is on the third picture. The woodworking benches router plate is made of aluminium alloy,  durable,  not easy to rust,  and could be used for years. Size: 11. 8 x 9. 25in / 300 x 235mm, hole distance:3. 35 x 3. 35 inch / 85 x 85mm. The trimming machine flip board will be suitable for trim routers and high precision woodworking. It is easy to operate,  save effort, make the woodworking be perfect done. Package include: 1x router table insert plate 11. 8 x 9. 25in, 2 x router insert rings,  1 x Pack of Fixing Screws.
BrandLYHLYA #ad
ManufacturerLYHLYA #ad
Part NumberLYHLYA0831-01-FBA