As an Amazon Associate I earn from qualifying purchases.
Fosmon #ad - Multiple uses tvs, lighting, aquariums, sprinkler systems, shop vac power tool, terrariums, humidifiers, heaters, dust collector.
It will give you the freedom to choose or change the control setup any time you like. Limited lifetime warranty includes a Limited Lifetime Warranty. Weather resistant durable, weather resistant construction for outdoor use.
OONO #ad - This function has a power-down memory function, and it does not need to be set again when the power is turned on next time. When you start to use the tool, the dust collector will turn on with a delay of 1 second to avoid overloading and tripping of the power circuit.
This function has a power-down memory function, and it does not need to be set again when the power is turned on next time. Maximum current 15 amp. The threshold power of the trigger tool to start the dust collector can be selected from 30 - 60 - 90 Watts.
This product has the power-on self-test, allowing you to focus on your work without having to repeatedly manually operate the power switch. Operating voltage ac 100 to 130v60hz. Length 19 inch 05 meter power cable, UL-certified American Standard 14AWG 2. 08 square millimeter x 3 cores. It will be in auto mode every time it is powered on. Maximum load 1800 Watts.
DEWENWILS #ad - Remote control outlet switch remotely turn on/off yard lights, sprinklers, fountain pumps, lighting fixtures, string lights, and other appliances with a push of a button from the house inside; remote plug in on/off switch for indoor and outdoor use.
3 heavy duty outlets up to 125 volts, 15a, 1875w resistive, 1000w tungsten and 1/2HP; high power remote control outlet with wireless remote can be used with most electrical appliances; triple outlets hold up to three lines. Waterproof construction outdoor weatherproof ppo shell power strip resists abrasion, moisture, snow, and exposure to sunlight; 6-inch SJTW 14/3C heavy gauge thick extension cord; twist-to-lock safety outlet cover provides protection from rain, and dust.
100 feet long rf range strong rf signal works through walls and doors without any interference; up to 100ft range in open areas; does not require line of sight between the remote controller and receiver with the individual ON/OFF button.
Etoolcity #ad - More safety. Adopting high-cost, the etoolcity automatic vacuum switch can work stably within 3600W. You can use screws to fix the power module part, or use strong nano-markless hook sticker to attach directly to the wall. Automatic delays 1s to turn on the vacuum when you start your tool, and delays 7s to turn off the vacuum to clean the inlet tube when you complete your work.
Unique current sensing technology. The switch's shell has pc+abs v0 grade flame retardant material, UL-certified American Standard 14AWG power cord which allowable passage with a large current that more than 30A, it is more reliable and safe to protect work.
Make the work more effective. Two installation methods. If the tool motor connected to the 'a' port exceeds 30w, the vacuum connected to the 'B' port will automatically delay 1s to turn on, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time. Suitable for most medium duty workloads. Both ways are very strong.
O'SKOOL #ad - Ul-certified us standard 14AWG power cord. Automatic turn on the vacuum when you start your tool, and delays 10 seconds to turn off the vacuum to clean the pipe when you complete your work. Package included: ●1x vacuum switch with 15'' power cord ●1x Installation instruction.
Use high-quality materials: ul-certified us standard 3-pin ac power socket. Make you safer and more reliable at work. Suitable for most medium duty workloads.
And the switch's shell is made of PA-765 flame retardant material. Saving time and electricity, reducing airboin toxin and noise that may lead the health problem. This can protect your health.
Ortis #ad - Turn on delay & safety: automatic delays 1s to turn on the vacuum when you start your tool, covered with PC+ABS V0 grade flame retardant material, which avoids circuit overload or tripping. Prevent vacuum from running too long or being unable to shut off after tool has stopped.
Configurable actuation threshold: 30w/60w, you can select flexibly appropriate actuation threshold according to your actual condition. Compatibility: supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Planers etc.
New generation: addition of two tool outlets, each key for corresponding option, Off and On; The values are clearly displayed with LED indicators, no need extra extension socket, avoid messy cords and save time; Three vacuum run modes can be switch freely: Auto, easier to check and set. Configurable shutoff delay time: automatically delays vacuum turn-off by an optional time 3s/7s/10s to continue clearing the remaining airborne debris after the tool has stopped, which reducing work area noise and improve work efficiency.
Ortis #ad - With this safety power switch, a thigh or even a hip without much effort. The 1. 5 feet long female cord is to accept the power source plug from your router or other power tool, and the 5. 5 feet long male cord is to plug into your standard wall outlet.
Both cords are heavy duty to stand up to everyday exposure in workshops. No more feeling around underneath your table to find your switch. Super easy install: several minutes tops that's all it takes. The large sign paddle uses high-hardness materials and is more durable.
Compatible with basic electrical boxes and table saws, CE, router tables, drill presses and other electrical workshop equipment. The paddle switch allows a maximum current of 16 amperes and 1800 watt power. Compatibility: this switch is approved by ul, rohs standards. Simple wiring: no need complicated wiring. Just plug it in and you are ready to go.
Ortis #ad - Turn on delay & safety: automatic delays 1s to turn on the vacuum when you start your tool, which avoids circuit overload or tripping. Configurable actuation threshold: 30w/60w, you can select flexibly appropriate actuation threshold according to your actual condition. Adopting ul-certified american Standard 14AWG power cord which allowable passage with a large current more than 30A.
New generation: addition of two tool outlets, avoid messy cords and save time; Three vacuum run modes can be switch freely: Auto, no need extra extension socket, each key for corresponding option, Off and On; The values are clearly displayed with LED indicators, easier to check and set.
Compatibility: supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Joiners, Table Saws, Routers, Planers etc. Max motor rating should not exceed 120V/15A 50/60Hz, Power Sanders, 1875W. Configurable shutoff delay time: automatically delays vacuum turn-off by an optional time 3s/7s/10s to continue clearing the remaining airborne debris after the tool has stopped, which reducing work area noise and improve work efficiency.
iVAC #ad - Turn off delay ensures that your work area continues to be cleared of remaining airborne debris. 2640 total watts two input power cords permit operation from two separately protected circuits.
1. Fosmon
#adBlack, Fosmon C-10683 Wireless Remote Control Outdoor Electrical Outlet Switch Weatherproof Heavy Duty 3-Prong Plug-in ETL Listed Battery Included
#adIt will give you the freedom to choose or change the control setup any time you like. Limited lifetime warranty includes a Limited Lifetime Warranty. Weather resistant durable, weather resistant construction for outdoor use.
More information #ad
Convenient conveniently turn your outside lights on from indoors or turn on hard to reach switches with the click of a remote. Great for lighting remotely turn your indoor and outdoor lighting ON/OFF. The wavepoint remote control outlet comes with pair and un-pair technology.| Brand | Fosmon #ad |
| Manufacturer | Fosmon #ad |
| Height | 1.8 Inches |
| Length | 4 Inches |
| Width | 7.2 Inches |
| Part Number | C-10683 |
| Model | C-10683 |
More information #ad
2. OONO
#adAutomated Vacuum Switch Automatic Shutoff, Automatic Dust Control Switch, for Contractors and Woodworkers
#adThis function has a power-down memory function, and it does not need to be set again when the power is turned on next time. Maximum current 15 amp. The threshold power of the trigger tool to start the dust collector can be selected from 30 - 60 - 90 Watts.
More information #ad
The delay time for shutoff can be configured 5 - 15 - 60 seconds, after the tool is stopped, the dust collector can continue to clearing the remaining dust and residue. This product has the power-on self-test, allowing you to focus on your work without having to repeatedly manually operate the power switch. Operating voltage ac 100 to 130v60hz. Length 19 inch 05 meter power cable, UL-certified American Standard 14AWG 2. 08 square millimeter x 3 cores. It will be in auto mode every time it is powered on. Maximum load 1800 Watts.
| Brand | OONO #ad |
| Manufacturer | CZH-LABS #ad |
| Part Number | F-1047 |
More information #ad
3. DEWENWILS
#ad100Ft Range, UL Listed, Wireless Remote Outlet Power Switch, DEWENWILS Outdoor Remote Control Outlet, Weatherproof 15 A Heavy Duty Electrical Plug, 3 Grounded Outlets
#ad3 heavy duty outlets up to 125 volts, 15a, 1875w resistive, 1000w tungsten and 1/2HP; high power remote control outlet with wireless remote can be used with most electrical appliances; triple outlets hold up to three lines. Waterproof construction outdoor weatherproof ppo shell power strip resists abrasion, moisture, snow, and exposure to sunlight; 6-inch SJTW 14/3C heavy gauge thick extension cord; twist-to-lock safety outlet cover provides protection from rain, and dust.
More information #ad
Simple & convenient hassle-free installation; plug and play; no programming or tools required; CR2032 battery included; perfect for the elderly and those with limited mobility or back pain; make your life convenient, safer, and energy efficient; UL certified and FCC approved. 100 feet long rf range strong rf signal works through walls and doors without any interference; up to 100ft range in open areas; does not require line of sight between the remote controller and receiver with the individual ON/OFF button.
| Brand | DEWENWILS #ad |
| Manufacturer | Dewenwils #ad |
| Length | 4.25 Inches |
| Weight | 0.02 Pounds |
| Width | 4.13 Inches |
| Part Number | HORS13B (UL Listed Model RA-029) |
| Model | HORS13B |
More information #ad
4. JessEm
#adJessEm 05010 Pow-R-Tek Remote Power Switch
#adJessEm #ad - 8 feet long grounded cord with molded 3-pin plug. Mounts directly to your JessEm Rout-R-Table Stand. Large safety switch paddle with removable key. Two plug receptacles for your router and small dust collector or shop vacuum. Switch rated at 15-amps.More information #ad
| Brand | JessEm #ad |
| Manufacturer | Jessem Products Limited #ad |
| Height | 11.05 Inches |
| Length | 5.05 Inches |
| Weight | 2.19 Pounds |
| Width | 6.2 Inches |
| Part Number | 05010 |
| Model | 05010 |
More information #ad
5. Etoolcity
#adEtoolcity Unique Current Sensing Technology to Delay Vacuum On to Prevent Circuit Overload, Automatic Vacuum Switch for Power Tools, Eliminating Circuit Breaker Tripping
#adUnique current sensing technology. The switch's shell has pc+abs v0 grade flame retardant material, UL-certified American Standard 14AWG power cord which allowable passage with a large current that more than 30A, it is more reliable and safe to protect work.
More information #ad
Etoolcity automatic vacuum switch has a starting threshold of approximately 025 amps30watts at 120v and 60watts at 220v, perfectly suited for medium-sized work loads such as most Miter Saws, Table Saws, Power Sanders and Routers, and extend the life of your vacuum. Make the work more effective. Two installation methods. If the tool motor connected to the 'a' port exceeds 30w, the vacuum connected to the 'B' port will automatically delay 1s to turn on, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time. Suitable for most medium duty workloads. Both ways are very strong.
| Brand | Etoolcity #ad |
| Manufacturer | Etoolcity #ad |
| Part Number | ec |
| Model | LF40-HVC01 |
More information #ad
6. O'SKOOL
#adO'SKOOL Automatic Vacuum Switch Allows Power Tool to Turn Vacuum/Accessory on and Off Automatically
#adUse high-quality materials: ul-certified us standard 3-pin ac power socket. Make you safer and more reliable at work. Suitable for most medium duty workloads.
More information #ad
Perfectly suited for medium-sized work loads such as most Miter Saws, Table Saws, Power Sanders and Routers, and extend the life of your vacuum. The total current of all electrical appliances used with this device must not exceed 15A when operating, and the electrical cutting tool can only be used at the TOOL socket and cannot be used by inserting it in the VAC socket. And the switch's shell is made of PA-765 flame retardant material. Saving time and electricity, reducing airboin toxin and noise that may lead the health problem. This can protect your health.
| Brand | O'SKOOL #ad |
| Manufacturer | O'skool #ad |
| Height | 2.56 Inches |
| Length | 7.09 Inches |
| Width | 4.65 Inches |
| Part Number | AUB08F7QD63C |
| Model | AUB08F7QD63C |
More information #ad
7. Ortis
#adAutomatic Vacuum Switch, Delay Vacuum On/Off to Prevent Circuit Overload and Tripping, Ortis Dust Control Autoswitch for More Power Tools, Adjustable Actuation Threshold
#adConfigurable actuation threshold: 30w/60w, you can select flexibly appropriate actuation threshold according to your actual condition. Compatibility: supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Planers etc.
More information #ad
Adopting ul-certified american Standard 14AWG power cord which allowable passage with a large current more than 30A. Max motor rating should not exceed 120v/15a 50/60Hz, Power Sanders, Routers, Joiners, Table Saws, 1875W. Thick copper core, less heat during use and extend service life. New generation: addition of two tool outlets, each key for corresponding option, Off and On; The values are clearly displayed with LED indicators, no need extra extension socket, avoid messy cords and save time; Three vacuum run modes can be switch freely: Auto, easier to check and set. Configurable shutoff delay time: automatically delays vacuum turn-off by an optional time 3s/7s/10s to continue clearing the remaining airborne debris after the tool has stopped, which reducing work area noise and improve work efficiency.
| Brand | Ortis #ad |
| Manufacturer | Ortis #ad |
| Part Number | hvc-03 |
More information #ad
8. Ortis
#ad110V Single Phase On/Off Switch, Ortis Router Table Switch with Large Stop Sign Paddle Easy Contact for Quick Power Off for Table Saws and Other Electrical Equipment
#adBoth cords are heavy duty to stand up to everyday exposure in workshops. No more feeling around underneath your table to find your switch. Super easy install: several minutes tops that's all it takes. The large sign paddle uses high-hardness materials and is more durable.
More information #ad
The switch has two cords. A lot safer and easier than usual. When we need to shut the power off right away, you can simply turn off the tools by a knee, it can be very dangerous and troublesome to hunting around for a switch under your router table or table saw. Compatible with basic electrical boxes and table saws, CE, router tables, drill presses and other electrical workshop equipment. The paddle switch allows a maximum current of 16 amperes and 1800 watt power. Compatibility: this switch is approved by ul, rohs standards. Simple wiring: no need complicated wiring. Just plug it in and you are ready to go.
| Brand | Ortis #ad |
| Manufacturer | Ortis #ad |
| Part Number | IIIFS-VXS2121 |
More information #ad
9. Ortis
#adAdjustable Actuation Threshold, Ortis Dust Control Autoswitch Delay Vacuum On/Off to Prevent Circuit Overload and Tripping, Automatic Vacuum Switch with Extra Outlet for Using More Power Tools, Yellow
#adNew generation: addition of two tool outlets, avoid messy cords and save time; Three vacuum run modes can be switch freely: Auto, no need extra extension socket, each key for corresponding option, Off and On; The values are clearly displayed with LED indicators, easier to check and set.
More information #ad
Prevent vacuum from running too long or being unable to shut off after tool has stopped. Thick copper core, covered with PC+ABS V0 grade flame retardant material, less heat during use and extend service life. Compatibility: supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Joiners, Table Saws, Routers, Planers etc. Max motor rating should not exceed 120V/15A 50/60Hz, Power Sanders, 1875W. Configurable shutoff delay time: automatically delays vacuum turn-off by an optional time 3s/7s/10s to continue clearing the remaining airborne debris after the tool has stopped, which reducing work area noise and improve work efficiency.
| Brand | Ortis #ad |
| Manufacturer | Ortis #ad |
| Height | 3 Inches |
| Length | 5 Inches |
| Width | 4 Inches |
| Part Number | HVC-03Y |
| Model | HVC-03Y |
More information #ad
10. iVAC
#adAutomated Vacuum Switch
#adMore information #ad
Dust collector / shop vacuum up to 1HP or 5 Peak HP. Turn on delay avoids the two power surges occurring at the same time. No venting holes the ivac's internal components are designed to generate very little heat. Modes of operation: auto, off and on.| Brand | iVAC #ad |
| Manufacturer | BCTINT Ltd #ad |
| Height | 2.2 Inches |
| Length | 10.8 Inches |
| Weight | 1.5 Pounds |
| Width | 7.8 Inches |
| Part Number | 10031-010 |
| Model | 10031-010 |
More information #ad
