Top 10 PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System – Power Lathe Accessories

As an Amazon Associate I earn from qualifying purchases.

1. PSI Woodworking

#ad

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

#ad
PSI Woodworking #ad - 5" diameter and weighs 4 lbs. Barracuda2 chuck body is 3. This is a c-series chuck; compatible with all additional c-series jaws and accessories: 7-3/4" jumbo flat jaws cjawfj2, 8-1/4" Super Finishing Jaws CJAWXL, 5" Small Flat Jaws CJAWFJ1, Pen Blank Drilling Jaws CJAWPEN, Set of 2 Alligator Jaws LCALJAWS, and more!.

Includes: 1 barracuda2 chuck body, 1 spindle adapter, 1 gear key, 1 woodworm screw chuck, 4 self-centering jaw sets, 1 Allen wrench, 8 screws, 1 storage case. Pre-threaded to 1" x 8tpi and includes 3/4" X 16TPI spindle adapter. 1 step jaws: 3/32" to 1-3/8" & 11/16" to 2-3/8"; #2 round jaws: 7/8" to 1-1/2" &1-1/4" to 2"; #3 wide bowl jaws: 3-1/16" To 4-3/8"; pin jaws: 1" To 2-1/4". With the variety of included jaws, the csc3000C will mount most turning projects onto your Lathe; including bowls, pens, other small turning projects, spindles, and much more.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height5.25 Inches
Length10.2 Inches
Weight8.6 Pounds
Width5 Inches
Part NumberCSC3000C
ModelCSC3000C
Warranty2 Years Under Normal Use

2. PSI Woodworking

#ad

PSI Woodworking CSC500K Barracuda Micro Key Lathe Chuck System

#ad
PSI Woodworking #ad - Includes step jaws, round jaws, and pin jaws. Weighs only 1. 2 pounds with a 2-1/8-inch outside diameter. Holds workpiece from 5/8-to-2-inch inside hole diameter. Holds dowell from 1/4-inch up to 1-1/2-inch outside diameter. Mounts to 3/4-inch-by-16 tpi & also adapts to 1-inch-by-8 tpi.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height3.1 Inches
Length13.3 Inches
Weight4.3 Pounds
Width7.3 Inches
Part NumberCSC500K
ModelCSC500K
Warranty2 year limited warranty

3. PSI Woodworking

#ad

PSI Woodworking CSCBARR52 Barracuda Insta-Change Jaw Chuck System

#ad
PSI Woodworking #ad - 5", enclosed back plate with indexing. Instantly change your chuck jaws; remove and replace all 4 jaws in less than a minute; jaws will snap into place for a secure mount; use the included jaw removal tool to pop them off the chuck body.

For all of your woodturning projects from pens to peppermills to bowls, #1 step Jaws CSCBARS, pin jaws cscbARP, the following jaw styles are available separately: #3 Wide Bowl Jaws CSCBARB, and Super Finishing Jaws CJAWXL52. The included #2 round jaws have an exterior work piece grip range of 1-1/2" To 2-5/8" And an interior work piece grip range of 2" To 3-3/8". Instar-change jaw chuck system includes: barracuda chuck body, set of #2 round jaws, set of pen blank drilling jaws, jaw tightening key, woodworm screw chuck, jaw removal tool, storage case. Barracuda chuck body: pre-threaded at 1" X 8TPI, weighs 4 lbs. Diameter 3.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Part NumberCSCBARR52
ModelCSCBARR52
Warranty2 Years Under Normal Use

4. Jet

#ad

JET JWL-1221VS 12-Inch by 21-Inch Variable Speed Wood Lathe & PSI Woodworking Products TM32 1/2-Inch Drill Chuck with #2 Morse Taper Arbor 1/2" 2MT

#ad
Jet #ad - Product 2: the #2mt arbor accepts 1/4" x 20tpi draw bolt; Draw bolt not included. Product 1: Unrivaled speed Control. Product 2: this 3-jaw chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories. Product 1: Optimally Designed speed ranges. Product 2: includes the 1/2" drill Chuck, #2 Morse Taper Arbor, and Jaw Tightening Key. Product 1: 60 to 3600 RPM variable speed. Product 2: removes easily with knock out bar. Product 1: forward to reverse is a smooth transition.
BrandJet #ad

5. PSI Woodworking

#ad

PSI Woodworking CUG3418CC Utility Grip 4-Jaw Lathe Chuck System

#ad
PSI Woodworking #ad - Includes #1 step jaws 3/32" to 1-7/8" external & 11/32" to 3-3/8" internal; includes #2 round jaws 1-1/2" to 3-1/8" External & 2" to 3-7/8" Internal. Chuck is pre-threaded to 1" x 8tpi and includes 3/4" x 16tpi headstock spindle adaptor; Chuck body weighs 4 lbs and is 4" in diameter. Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathes. This "c-series" chuck is compatible with all "C-Series" jaws and accessories. Includes screw chuck, allen wrench, and a set of tightening levers.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height4 Inches
Length4 Inches
Weight4.95 Pounds
Width2 Inches
Part NumberCUG3418CC
ModelCUG3418CC
Warranty2 Years Under Normal Use

6. BestEquip

#ad

BestEquip Lathe Chuck 4-inch Woodturning Chuck 4 Jaws 1inch x 8TPI Thread Lathe Chucks Set Nova Lathe Chuck Wood Lathe Bowl Chuck with Set of Quality Accessories Bevel Gear and A Case for Woodworking

#ad
BestEquip #ad - High performance jaws- each jaw can be adjusted to center with superior gripping force, this improves chuck flexibility, clamping most shaped workpieces can also be realized.

Precision highly polishing- with smooth surface, the lathe chuck is milled by pricing milling skill for high precision, accuracy and pretty appearance. Premium quality- chuck body made of quality steel. All guideways and bearing surfaces are precisely machined for better performance. Wide application- applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories. A set of complete accessories- this complete lathe chuck set include bevel gears, several jaws and a set of installation tools, two deformation sleeve, which bring much convenience for your operation.
BrandBestEquip #ad
ManufacturerBestEquip #ad
Height4.3 Inches
Length18.1 Inches
Weight15.9 Pounds
Width12.6 Inches

7. BestEquip

#ad

BestEquip Lathe Chuck 4-inch Wood turning Chuck 4 Jaws 1inch x 8TPI Thread Lathe Chucks Set Self-centering Chuck Wood Lathe Bowl Chuck with Set of Quality Accessories New Case for Woodworking

#ad
BestEquip #ad - All guideways and bearing surfaces are precisely machined for better performance. Precision highly polishing- with smooth surface, the lathe chuck is milled by pricing milling skill for high precision, accuracy and pretty appearance.

A set of complete accessories- this complete lathe chuck set include two jaws set and a set of installation tools, two deformation sleeve, which bring much convenience for your operation. High performance jaws- each jaw can be adjusted to center with superior gripping force, this improves chuck flexibility, clamping most shaped workpieces can also be realized. Wide application- applicable to the general lathe, drilling machine and machine accessories, grinder, milling machine, woodworking machinery accessories and other machine tools and accessories. Premium quality- chuck body made of quality steel.
BrandBestEquip #ad
ManufacturerBestEquip #ad
Height4.3 Inches
Length18.1 Inches
Weight14 Pounds
Width12.6 Inches

8. Penn State Industries

#ad

Penn State Industries CSC3500SE Wood Lathe Chuck Ultra Essentials Bundle

#ad
Penn State Industries #ad - Get a powerful grip on your work with the easy to use, midi, high-performance, key operated self centering four-jaw Barracuda2 wood lathe chuck system. Chuck body is pre-threaded to 1" x 8tpi, weighs 4 lbs.

And measures 3-1/2" diameter. Includes: barracuda2 chuck body, allen wrench, step jaws, Screw Chuck, 2" Round Jaws, 16 Jaw Screws, Pen Blank Drilling Jaws, jaw tightening key, and a Storage/Carrying Case. Compatible with all additional c-series jaws and accessories: 7-3/4" jumbo flat jaws cjawfj2, 5" Small Flat Jaws CJAWFJ1, pin jaws CJAWPC, #3 Round Jaws CJAW3, Set of 2 Alligator Jaws LCALJAWS, and more!. With the variety of included jaws, other small turning projects, spindles, pens, the CSC3500SE will mount most turning projects onto your lathe; including bowls, and much more. Works with any mini, or full sized lathe.
BrandPenn State Industries #ad
ManufacturerPenn State Industries #ad
Part NumberCSC3500SE
ModelCSC3500SE

9. CfoPiryx

#ad

High Accuracy Self Centering Lathe Chuck, Zinc Alloy Wood Turning Chuck with Connecting Rod for Mini Lathe, Power Lathe Accessories, 4-Jaw Lathe Chuck

#ad
CfoPiryx #ad - Package: our package come with a lathe chuck, a L shape spanner and a connection pole. Replacement: you can use it to replace the old or brocken one. Material: made of zinc alloy, it is practical and durable. Useful: the 4 jaw lathe chuck is convenient to use, has long service life. Size: the out diameter is about 12-65mm/047-2. 6inch, and inner diameter is about 1. 8-56mm/007-2. 2inch.
BrandCfoPiryx #ad
ManufacturerCfoPiryx #ad
Height1.18 Inches
Length5.91 Inches
Weight0.51 Pounds
Width3.94 Inches
Part Number16036975236376

10. PSI Woodworking

#ad

PSI Woodworking LCM18X Wood Lathe 3-Jaw Micro Chuck

#ad
PSI Woodworking #ad - 20 lbs; includes 2 Tightening Levers. Self-centering 3-jaw micro chuck is ideal for holding small woodturning projects and drilling. Inside hold from 3/4" to 2-1/2"; Outside hold up to 1-1/4". Pre-threaded to 1" x 8tpi and includes a 3/4" x 16tpi lathe headstock spindle adaptor. Diameter is 2-1/2" and weighs 1. Reversible step jaws can hold work-piece from the inside or outside.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Part NumberLCM18X
ModelLCM18X
Warranty2 Years Under Normal Use