
Uncategorized
As an Amazon Associate I earn from qualifying purchases.
The miter cut calculation has an input measurement from 0-220 degrees. Memory: this angle finder provides angle memory, to provide the same angle measurement in different areas of the jobsite.

5°, increase/Decrease Angle: 01°. Will not display a number on lcd, just only Assist You to Judge If It Is Horizontal / Vertical or Not. It can't hold the Angle Firm Completely! Data holdif you want to use data holding function, you need to press the hOLD Button in Red rather than Twist the Knob.

Easily send inside and outside angle measurements to your smartphone with one click and quickly figure out compound angles with the ToolSmart App.



Br>. Large lcd display: easily readable lcd display shows the exact measuring results at once with data holding function, make it much easier for you to read the data.

Scratches on rulers are resulted from touching WITH EACH OTHER. No reverse angle/display function. It may apprear on brand-new product. High accuracyaccuracy of this protractor is ±03 degree. Durable rulerswell-made stainless steel rulers and laser etched measurements offer clear reading and years' usage.


To find relative angle, determine first angle then push the zero button, then measure second angle to see the difference. Versatile angle measurement tool doubles as both a digital angle gauge and a protractor for measuring all your workshop angles, squaring frames, trim, baseboard, molding, bevels, miters for crown, general woodworking, setting miter saw blade angles and more.
Large lcd display Digits make it easy to read. Lcd display hold lets you freeze a displayed value before moving tool. Measure 360 degrees – pivot allows full rotation in both directions so you can precisely measure inside or outside angles With ease at +/- 0 . 3 degree accuracy.

Display: easy-to-read illuminated, rotating flip display for the inclinometer and angle finder. Leg extension, hard thermoformed case, 4 AA 1. 5v batteries. The miter cut calculation has an input measurement from 0-270 degrees.
Top 10 Perfect Point Digital Angle Finder – Construction Protractors
As an Amazon Associate I earn from qualifying purchases.
1. BOSCH
#ad
Bosch 4-in-1 Digital Angle Finder GAM 220 MF
#adBOSCH #ad - Leg extension, hard thermoformed case, 4 AA 1. 5v batteries. Versatility: the bosch gam 220 mf provides four tools in one including an angle finder, miter calculator, protractor and level.The miter cut calculation has an input measurement from 0-220 degrees. Memory: this angle finder provides angle memory, to provide the same angle measurement in different areas of the jobsite.
More information #ad
Display: easy-to-read illuminated, rotating flip display. Durable: features robust housing with IP54 protection, making the angle finder water and dust resistant. Compelte: the bosch gam 220 mf includes a 4-in-1 digital angle finder, 16 in.Brand | BOSCH #ad |
Manufacturer | Bosch #ad |
Height | 1.4 Inches |
Length | 17 Inches |
Weight | 2.4 Pounds |
Width | 2.4 Inches |
Part Number | GAM 220 MF |
Model | GAM 220 MF |
More information #ad
2. Neoteck
#ad
Neoteck Aluminum Digital Angle Finder Protractor 225° 16 inch Backlit LCD Digital with Horizontal and Vertical Bubble, Silver
#adNeoteck #ad - Digital angle finder protractor with high accuracy, an interior Designer Should Have One! High accuracy angle range is 0-225°, Delicate Design and Modern Appearance, measuring precision: ±0.5°, increase/Decrease Angle: 01°. Will not display a number on lcd, just only Assist You to Judge If It Is Horizontal / Vertical or Not. It can't hold the Angle Firm Completely! Data holdif you want to use data holding function, you need to press the hOLD Button in Red rather than Twist the Knob.
More information #ad
With horizontal and vertical bubble level it also can be used like a spirit level, helping you to check and Calibrate NOTE: It is NOT a Digital Level. The knob is Just for Loosening and Tightening. Backlit lcd display come with backlit led display Which Makes it Possible to Read the Data Clearly, Even under a Low Light Circumstance.Brand | Neoteck #ad |
Manufacturer | Neoteck #ad |
Part Number | NTKTL170 |
Model | NTKTL170 |
More information #ad
3. General Tools
#ad
Level and 10.5-Inch Ruler, Protractor, General Tools TS02 ToolSmart Bluetooth Connected Digital Angle Finder
#adGeneral Tools #ad - Using the toolsmart app, you can also quickly and easily determine the materials and tools you will need to complete your project. This digital protractor tool is especially useful for crown moulding and flooring applications to make sure you get perfect cuts every time.Easily send inside and outside angle measurements to your smartphone with one click and quickly figure out compound angles with the ToolSmart App.
More information #ad
This next generation miter finder and angle measurement tool also incorporates a 105 in. Ruler and horizontal & vertical bubble levels. The toolsmart digital angle finder accurately determines the angle of any corner, easily determine the angle of any corner up to 225 degrees.Brand | General Tools #ad |
Manufacturer | General Tools #ad |
Height | 12 Inches |
Length | 0.9 Inches |
Width | 2 Inches |
Part Number | TS02 |
Model | TS02 |
More information #ad
4. True Power
#ad
Angle Finder & Level 0°-225° #677, 16" Digital Protractor
#adTrue Power #ad - Display reading "Hold" function Illuminated LCD display. Measuring precision: +-05degree Digital Accuracy 01 degree for all ranges. Length: 16" measuring angle range: 0-225 Degree. Increase/decrease angle: 01 degree increments Automatically shut off after five minutes.More information #ad
Brand | True Power #ad |
Manufacturer | True Power #ad |
Height | 1.5 Inches |
Length | 20.5 Inches |
Weight | 1 Pounds |
Width | 4.5 Inches |
Part Number | 677 |
Model | 04-0677 |
More information #ad
5. GemRed
#ad
GemRed 82302 Digital Protractor Angle Finder 270mmAccuracy 0.15 degree
#adGemRed #ad - V-notch end for checking 90° degree quickly. Easy to measure all kinds of angle and draw lines. Easy calibration and Zero setting. Accuracy 015°; resolution 005 °. Measuring range 0°~360°. Applied for professional measuring in woodworking, construction etc.More information #ad
Conversion between absolute measurement and relative measurement. High accuracy level bubble for measuring horizontal level easily. Working more than 2000 hours with one piece of CR2032 coin batteryincluded. Display always reads upright, no matter which way it is turned.Brand | GemRed #ad |
Manufacturer | Guilin GemRed Sensor Technology Co., Ltd #ad |
Part Number | 82302-00-W |
More information #ad
6. Fdit
#ad
0-225° Digital Angle Gauge Digital Inclinometer Meter Protractor Angle Finder Ruler Tool with LCD Display & Blue Backlight Vertical Horizontal Dual Spirit Level 16 Inch
#adFdit #ad - Accurate measurement: measuring range is 0-225° vertical and horizontal at a measuring precision of 02°. Br>. Mechanical lock: keep the angle invariable in the process of line or measure the angle.Br>. Large lcd display: easily readable lcd display shows the exact measuring results at once with data holding function, make it much easier for you to read the data.
More information #ad
Br>. Good helper: this digital angle gauge would be a good helper for woodworkers. Automatically shut off after five minutes to save energy, and with low power alarm. Br>. Perfect to measure the exact angles such as trays, sloping roofs and handrails during lineation. Br>. Easy to use: large and clear lcd with backlight, keep its normal use on dark.Brand | Fdit #ad |
Manufacturer | Fdit #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 0.02 Pounds |
Width | 0 Inches |
Part Number | Fdit0fc2s6upnz |
More information #ad
7. GemRed
#ad
GemRed Digital Angle Finder Protractor Stainless steel, 7inch/200mm
#adGemRed #ad - Folded length: about 7. 5 inch/220mm. Total length 400mm. Notesstainless steel edge is sharp, please be cautious while using and keep it away from children.Scratches on rulers are resulted from touching WITH EACH OTHER. No reverse angle/display function. It may apprear on brand-new product. High accuracyaccuracy of this protractor is ±03 degree. Durable rulerswell-made stainless steel rulers and laser etched measurements offer clear reading and years' usage.
More information #ad
Locking functionfor read it easily, gemred angle finder could be locked at any angle. Digital DisplayEasy to read. It is a good choice for most projects like woodworking, crown molding and daily use. 2 functions' combinationruler and protractor combination for easy measuring inside and outside angles.Brand | GemRed #ad |
Manufacturer | GemRed #ad |
Part Number | 82305-200 |
More information #ad
8. General Tools
#ad
5-Inch, General Tools 822 Digital Angle Finder Rule
#adGeneral Tools #ad - Hinge mechanism on the angle rule allows a full 360-degrees to measure inside outside and reverse angles. Digital protractor has lock and reverse angle functions that make all types of work easy and fast. Protractor comes with a large easy-to-read LCD display; never guess or eye ball the angle and length again with one convenient tool.More information #ad
Digital stainless steel ruler and angle finder combo makes precise measurements for easy woodworking. Woodworking tool can be zeroed at any point in the swing; digital measuring stick has a length of 5 inches.Brand | General Tools #ad |
Manufacturer | General Tools #ad |
Height | 10.88 Inches |
Length | 1.13 Inches |
Weight | 0.2 Pounds |
Width | 5.38 Inches |
Part Number | 822 |
Model | 822 |
Warranty | 1 year parts |
More information #ad
9. Calculated Industries
#ad
Calculated Industries 7455 AccuMASTER Digital Protractor Angle Finder Ruler for Crown, Protective Case, Trim, Woodworking | 7 Inch Stainless Steel Blade | Hold and Zero Function | Includes Battery
#adCalculated Industries #ad - Easy to read stainless steel rulers have permanently etched markings in 16ths and mm's on one and 32nds and mm's on the other for easier, clearer reading of precision measurements in your favorite units and scale. Instantly reset your zero point at any position for relative angles.To find relative angle, determine first angle then push the zero button, then measure second angle to see the difference. Versatile angle measurement tool doubles as both a digital angle gauge and a protractor for measuring all your workshop angles, squaring frames, trim, baseboard, molding, bevels, miters for crown, general woodworking, setting miter saw blade angles and more.
More information #ad
Comes complete – with protective case, manual and auto-off, clear American-written, long-life CR2032 3V battery, large-print user guide and 2-year limited warranty. Large lcd display Digits make it easy to read. Lcd display hold lets you freeze a displayed value before moving tool. Measure 360 degrees – pivot allows full rotation in both directions so you can precisely measure inside or outside angles With ease at +/- 0 . 3 degree accuracy.
Brand | Calculated Industries #ad |
Manufacturer | Calculated Industries #ad |
Height | 0.75 Inches |
Length | 8.5 Inches |
Weight | 0.3 Pounds |
Width | 1.5 Inches |
Part Number | 7455 |
Model | 7455 |
Warranty | 2-year limited warrannty |
More information #ad
10. BOSCH
#ad
Bosch 5-in-1 Digital Angle Finder and Inclinometer GAM 270 MFL
#adBOSCH #ad - Complete: the bosch gam 270 mfl includes a 5-in-1 digital angle finder, 24 in. Durable: features robust housing with IP54 protection, making the angle finder water and dust resistant.Display: easy-to-read illuminated, rotating flip display for the inclinometer and angle finder. Leg extension, hard thermoformed case, 4 AA 1. 5v batteries. The miter cut calculation has an input measurement from 0-270 degrees.
More information #ad
Memory: this angle finder provides angle memory, to provide the same angle and inclinometer measurements in different areas of the jobsite. Versatility: the bosch gam 270 mfl provides five tools in one including a digital angle finder, an inclinometer, a miter calculator, a protractor and level.Brand | BOSCH #ad |
Manufacturer | Bosch #ad |
Height | 1.4 Inches |
Length | 17 Inches |
Weight | 2.4 Pounds |
Width | 2.4 Inches |
Part Number | GAM 270 MFL |
Model | GAM 270 MFL |
More information #ad