Top 10 Live Center Tailstock Morse Taper 2 – Lathe Turning Tools

As an Amazon Associate I earn from qualifying purchases.

1. HFS

 #ad

HFS R Heavy Duty Live Tailstock Center #2 Morse Taper

#ad
HFS #ad - Note: place rear taper end on the tail stock and the opposite end in the center drill hole; We recommend applying lubrication oil to bearing prior to each use not included. Packing： shipped in Protective case for storage. Ideal for many turn-between-center woodturning projects. Application: precision ball bearings for smooth, balanced turning. Sturdy: alloy steel shaft construction for ultimate strength and longevity. Size: #2 morse taper cone is 2-1/2" by 1-11/16" overall diameter.
BrandHFS #ad
ManufacturerHFS #ad
Weight1.01 Pounds
Part NumberLTC-1MT

2. PSI Woodworking

 #ad

PSI Woodworking LTCA18 Live Tailstock Chuck Adapter to 1" x 8tpi Thread with #2 Morse Taper Mount

#ad
PSI Woodworking #ad - Converts your lathe's #2MT dead tailstock to 1" x 8tpi threaded live tailstock. After being mounted, tailstock is converted from dead to live and it will accept all 1" x 8tpi threaded lathe tool accessories. Wrench is included. Mounts to tailstock with the included #2 Morse Taper arbor. Ideal for an additional secure workpiece mount from tailstock end; Allows precision centering of spindles or dowels at the tailstock end; Provides the ideal system for the mounting of bowls for hollowing.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height2.5 Inches
Length8.5 Inches
Width3 Inches
Part NumberLTCA18
ModelLTCA18
Warranty2 Years Under Normal Use

3. ZffXH

 #ad

MT2 Live Center, 60 degree 40CR MT2 Morse Taper, ZffXH Heavy Duty Live Tailstock Center, Woodworking Tapered Turn Center

#ad
ZffXH #ad - Materialit is made of 40cr steel and quenching hardness from 45 to 50HRC. The part of pointed shaft is made of high-speed steel, high-quality, speed bearing. Typelathe center form is rotary center and large load type, dowels, pen mandrel shafts, small turnings, so it’s suitable for most lathes to use and great for holding drill bits, and much more.

Tips we can mosic the carbide tipped in the center that you need and it can use last 2 years under normal use. Key parts are lubricated for use and durability. Technical detailsthe #2mt arbor accepts 1/4" x 20tpi draw bolt; draw bolt not included;Heavy duty 2#MT live tailstock center with a 60 degree point and 001 precision to ensure turn smoothly and work for heavy duty workpieces. Size1caudal vertebra big end diameter: 17. 780mm/07 inch / 2total length: 1305mm/5. 3 inch / 3maximum outside diameter: 52mm/2 inch.
BrandZffXH #ad
ManufacturerZffXH #ad
Weight0.99 Pounds
Part NumberTOOL2020063091

4. CNCTOPBAOS

 #ad

65mm Lathe Center Morse Taper 2 Live Center Movable MT2 Tailstock with 4pcs Replaceable Heads For CNC 4h Axis Engraving Machine Woodworking

#ad
CNCTOPBAOS #ad - Net weight:2. 1kgs. Stretch distance:50mm. Center:mt2 morse No. 2 taper. Center height: 65mm. Come with 4 Replaceable heads.
BrandCNCTOPBAOS #ad
ManufacturerChangzhou Rattm Motor Co.,Ltd #ad
Weight2.1 Kilograms
Part NumberS23

5. KUNTEC

 #ad

KUNTEC 4pcs MT2 Live Center Wood Lathe Drive Spur Cup Set #2 Morse Taper

#ad
KUNTEC #ad - Dust proof seal preventing cutting liquid and dust enter into bearing thus prolong service time. Lathe drive center is designed for wood lathe in medium speed and medium load environment. Includes 4 different size Centers that mount on your lathe headstock and tailstock with the #2 Morse Taper arbor. Package includes: 1pc 1/8" dia. Made from high carbon steel for durability and longevity. Cupped dead center, 1pc liver center for smooth friction free turning. Spur driver, 1pc 5/8" dia. Spur center, 1pc 5/8" dia.
BrandKUNTEC #ad
ManufacturerKUANGCHEN #ad
Height2.3 Inches
Length7.5 Inches
Width7.3 Inches
Part NumberKC-0063

6. PSI Woodworking

 #ad

1 Morse Taper, PSI Woodworking LCENTLT1 Heavy Duty #1MT Live Tailstock Center with 60 Degree Point

#ad
PSI Woodworking #ad - Ideal for many turn-between-center woodturning projects. Heavy duty 60 degree point live center for woodturning project work-piece support from tailstock end of lathe. Overall live center length with #1 Morse Taper arbor is 4-1/4". Precision ball bearings for smooth, balanced turning. Cone is 1-1/4" diameter by 2" long.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height1.25 Inches
Length4.4 Inches
Weight0.5 Pounds
Width1.25 Inches
Part NumberLCENTLT1
ModelLCENTLT1
Warranty2 Years Under Normal Use

7. Zerone

 #ad

MT2 Precision Rotary Live Tailstock Center Morse Taper 2 Milling Center for Lathe in Medium Speed and Medium Load Environment, Lathe Center

#ad
Zerone #ad - Shippingthis item will ship from usa, delivery time need about 4-7 days. If there is any questions please feel free to contact with us, our experienced customer service team will response in 24 hours.

Ust proof seal preventing cutting dust enter into bearing thus prolong service time. Ultra precisionhigh quality bearing design, using high speed bearing for high accuracy. Applicationthe primary use of a center is to ensure concentric work is produced; this allows the workpiece to be transferred between machining operations without any loss of accuracy. Designed for lathe in medium speed and medium load environment.

Accuracy is less or equal to. 0005. Ideal to support your work at the tailstock end of your lathe. Maximum rpm is 5, 000 Quenching hardness 60 ~ 62 hrcconical part is made from t10 steel, the main body part is made from high-quality steel, quenching hardness 60 to 62 HRC, durable to use. High qualitywell balanced and smooth for effective turning.
BrandZerone #ad
ManufacturerZerone #ad

8. Z Live Center

 #ad

MT2 Wood Lathe Live Center Set Morse Taper 2 for Wood Lathe

#ad
Z Live Center #ad - Shaft is made of alloy steel through heat treatment to Rc 60-62. Designed for wood lathe in medium speed and medium load environment. Dust proof seal preventing cutting liquid and dust enter into bearing thus prolong service time. Morse taper 2, MT2 Shank. Mt2 li:82, l2: 87, l4:104, a:17.78, l3: 87, b:69.
BrandZ Live Center #ad
ManufacturerZ Live Center #ad
Height2 Inches
Length6 Inches
Weight2 Pounds
Width5 Inches
Part NumberMT2WLLCS
ModelMT2WLLCS

9. PSI Woodworking

 #ad

PSI Woodworking LDC2MT Live Tailstock 1/2" Drill Chuck with #2 Morse Taper Mount

#ad
PSI Woodworking #ad - Converts your lathe's #2mt dead tailstock to a live tailstock with a 1/2" drill chuck mounted. Mounts to tailstock with the included #2 Morse Taper arbor; Spins with ball bearings. After being mounted, tenons, dowels, tailstock is converted from dead to live and it will accept mandrels, or any shaft up to 1/2" in diameter. Ideal for an additional secure workpiece mount from tailstock end; Allows centering and gripping of spindles or dowels at the tailstock end. Not to be used for drilling.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking Products #ad
Height2.25 Inches
Length6.75 Inches
Weight2.2 Pounds
Width2.25 Inches
Part NumberLDC2MT
ModelLDC2MT
Warranty2 years under normal use

10. PSI Woodworking

 #ad

PSI Woodworking PKMSTS2 Live Tailstock Mandrel Saver #2 Morse Taper

#ad
PSI Woodworking #ad - Will work with all mandrels with a diameter of 0 There is no longer a need for spacer bushings. Compatible with lathes that accept #2MT accessories in tailstock. Unique design to support the end of your penturning mandrel. 245" or less. Provides no pressure on the tailstock end of the mandrel shaft thus eliminating any bending or vibration.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height1.7 Inches
Length3.8 Inches
Weight0.4 Pounds
Width1.8 Inches
Part NumberPKMSTS2
ModelPKMSTS2
Warranty2 Years Under Normal Use

Tags: