Top 10 Jack Plane Replacement Blade – Hand Tools

As an Amazon Associate I earn from qualifying purchases.

1. Caliastro

#ad

For No. 4 & No. 5 Iron Bench Planes by all Major Brands, 5-pack of 2 Inch Wide Replacement Bench Plane Blades

#ad
Caliastro #ad - 5-pack of 2" replacement blade for no 5 and No 4 bench plane fits all top brand bench planes that are 14 inches long in length. The blades will need to be sharpened as they are only beveled with an accurate ground edge of 25º. Bench plane blades are 7. 5 inches long, 2. 0 inches wide and is 00787 inches thick. Each blade is individually wrapped in wax paper and a plastic sleeve for preservation. The blades are manufactured from selected High Carbon Steel - fully hardened and tempered to take and hold a razor sharp edge even on hardest woods.
BrandCaliastro #ad
ManufacturerCaliastro LLC #ad

2. BIG HORN

#ad

Big Horn 19318 Wide Cutter Blade For Jack Plane

#ad
BIG HORN #ad - 2” wide x 7-3/8” long. Features: high carbon steel. For bench and jack planes. Pre-sharpened. Hardened tempered steel gives precision ground cutter edge durability.
BrandBIG HORN #ad
ManufacturerBig Horn #ad
Height1 Inches
Length1 Inches
Weight0.3 Pounds
Width1 Inches
Part Number19318
Model19318

3. Stanley

#ad

Stanley 12-508 Replacement Block Plane Iron Cutter for Plane #12-331

#ad
Stanley #ad - Can be honed to a razor-sharp edge. Excellent edge retention. Made out of chrome carbon steel. Supplied with an accurate ground edge of 25 degrees. Easier to sharpen. Made from hardened and tempered high carbon chrome steel. Cutter ground to provide a flat surface that is easier to sharpen. Stanley's limited lifetime warranty.
BrandStanley #ad
ManufacturerStanley #ad
Height2.5 Inches
Length7.3 Inches
Weight0.13 Pounds
Width0.1 Inches
Part Number12-508
Model0-12-508
WarrantyLimited Lifetime Warranty: Stanley warrants this product to the original purchaser for its useful life against deficiencies in material and workmanship.

4. YOGEON

#ad

Perfect for Woodworking, Surface Smoothing…, YOGEON Woodworking plane,Hand planer, Hand Plane Planer Wooden Carpenter Woodcraft Tool, Trimming, Wood Planing

#ad
YOGEON #ad - Comfortable handle gripthe handle with a contoured design fit comfortably in the hand, making this planer easy to hold and control. The compact size fits anywhere without taking up the entire surface, keep your table looking stylish and chic. High quality constructionthe tv remote control stand is allow you to move the entire remote easily and reduce your desk clutter down to almost zero, keep your desk neat tidy, the best choice for your office, school and home use.

Widely useour hand plane for diy allows you to tackle a range of professional and DIY wood projects. Two wood boards can be detached by hand, which means cleaning up is simple. The frog and base are a sturdy one-piece casting. Greater accuracythe plane is made of high quality steel, sharper and more durable! Both planes have blades machined from thick 1/8'' steel for minimal chatter, and are precision ground for flatness.

Nothing says woodworking like hand planes. Greater controlthis premium planing plane is the perfect tool to help you perfect the shape and dimensions of wood or to give it a final finish. Precision ground cutter allows for cutting with greater accuracy and confidence. Friendly to woodworkers of all skill levels from beginner to advanced, perfect for cutting, polishing and deburring woodworking surfaces.
BrandYOGEON #ad
ManufacturerYOGEON #ad
Height1.6 Inches
Length11 Inches
Weight1.9 Pounds
Width2.4 Inches
Part NumberParent HP

5. RDEXP

#ad

RDEXP 44mm Width High-carbon Steel Carpentry Woodwork Hand Planer for Woodwork Planer DIY Tool Set of 2 Silver

#ad
RDEXP #ad - One set include 2 carpentry woodwork hand planer. Easy replacement with less down time. Suitable for many kinds of personal woodwork planer DIY crafts. It is durable which is made of high-carbon steel material.
BrandRDEXP #ad
ManufacturerRDEXPAM #ad
Weight0.29 Pounds
Part NumberM5170619060

6. Stanley

#ad

Stanley 12-313 Iron Bench Plane Replacement

#ad
Stanley #ad - All cutters are fine rotary ground to give a flat surface that is easier to sharpen. Can be honed to a razor-sharp edge. Ground to a flat surface for easy sharpening. Length: 50mm. Comes with accurate ground edge of 25º; finishing with an additional honed angle of 30° is recommended. Limited Lifetime Warranty. Hardened, tempered high-carbon chrome steel assures excellent edge retention. Material: carbon steel.
BrandStanley #ad
ManufacturerStanley #ad
Height0.16 Inches
Length10.24 Inches
Weight0.31 Pounds
Width2.6 Inches
Part Number0-12-313
Model0-12-313
WarrantyStanley warrants this product to the original purchaser for its useful life against deficiencies in material and workmanship. This LIMITED LIFETIME WARRANTY does not cover products that are improperly used, abused, altered or repaired. Deficient products will be replaced or repaired.

7. BRUFER Quality Products

#ad

BRUFER 185127 Replacement Blade for No. 4 / No. 5 Bench Plane

#ad
BRUFER Quality Products #ad - Total blade length of 7-7/16 inch. 1-7/8 inches wide. Blade thickness is 1/8 inch. Replacement blade for Bench Plane #4, #5. Made of high carbon steel and fully hardened. Blade comes individually packaged. Blade thickness is 1/8 inch.
BrandBRUFER Quality Products #ad
ManufacturerBRUFER #ad
Height0.4 Inches
Length7.5 Inches
Width2 Inches

8. ATLIN

#ad

ATLIN Honing Guide, Fits Chisels 1/8” to 1-7/8”, Fits Planer Blades 1-3/8” to 3-1/8”

#ad
ATLIN #ad - Projection measurements for 25° and 30° angles are conveniently located on the packaging and on the cast aluminum body of the tool. Built to last – the atlin honing tool features a hardened steel roller wheel which will not wear down over time or develop flat spots. Includes flat jaws for clamping mortise chisels, this sharpening guide will fit chisels from 1/8” to 1-7/8” in width, and grooved jaws for clamping paring chisels and planer blades.

Included with your order are illustrated, step-by-step instructions which detail how to get the perfect edge every time. Instructions included – honing jigs can appear deceptively simple, however there is more to them than most people realize. Easily extend the life of your tools – forget the days of trying to find the correct angle by hand or accidentally tapering the edge of your tools.

The body of the chisel sharpener is crafted from durable cast aluminum. Chisel sharpening has never been so easy. Choose your own angle – all standard sharpening angles can be achieved using this sharpening jig by adjusting the tool projection. The atlin honing guide allows you to easily choose your desired sharpening angle, and consistently achieve the perfect edge on your tools. Sizing & compatibility – self centering and fully adjustable, and plane irons from 1-3/8” to 3-1/8” in width.
BrandATLIN #ad
ManufacturerATLIN #ad
Height4.1 Inches
Length1.5 Inches
Weight0.55 Pounds
Width1.3 Inches
Part NumberWO1002A
ModelWO1002A

9. Stanley

#ad

STANLEY Hand Planer, Low Angle Jack 12-137, No.62

#ad
Stanley #ad - Adjustable throat plate for different types of wood. The bench plane has norris type adjustment for ease of use. Iron of the hand planer for woodworking is made from extra-thick 1/8-inch 3. 18 mm a2 steel for excellent edge retention. The wood plane has a cherry wood handle and knob for comfort. Replacement Blade 12-142.
BrandStanley #ad
ManufacturerStanley #ad
Height0.79 Inches
Length1.97 Inches
Weight6.37 Pounds
Width0.79 Inches
Part Number12-137
Model12-137
WarrantyLimited lifetime

10. Vtopmart

#ad

Vtopmart 20 Metal Wood Oscillating Multitool Quick Release Saw Blades Compatible with Fein Multimaster Porter Cable Black & Decker Bosch Craftsman Ridgid Ryobi Makita Milwaukee Rockwell.

#ad
Vtopmart #ad - Superior value oscillating saw blades kit--20 pcs contain 6 different kinds of saw blades, metal plastic and other materials, which could be used for workshop, each type of saw blade is specific for a particular purpose. Tougher and thicker than most--made of alloy steel and high carbon steel, our oscillating multitool blades are manufactured with special techniques and thick gauge metals due to which it becomes durable for a long period.

Universal compatible system--our quick release saw blades are compatible with many oscillating tools in the market, Hitachi, Black & Decker, Milwaukee, Ryobi, such as Fein Multimaster, Chicago, Craftsman and More. Notice--do not fit fein starlock,bosch mx30bosch MX30EC-31, Bosch Quick Release tools ; Do not fit Fein Supercut.

2 kinds of special design precision saw blades have longer wavy tooth that is specifically designed to provide faster, cleaner cuts in wood and plastic. Special design for precision cutting--built-in length markers on two sides, one side is inch and other is centimeter, ensure you can get accurate cuts easy and fast while you working with it. Our oscillating saw blades can meet a variety of needs, for cutting wood, household or other place.
BrandVtopmart #ad
ManufacturerVtopmart #ad
Part NumberUSVM01001
ModelUSVM01001