As an Amazon Associate I earn from qualifying purchases.
1. Evolution #ad
Blue, 10-Inch x 52-Tooth , Evolution Power Tools 10BLADEST Steel Cutting Saw Blade #adEvolution #ad
- Max rpm 3000 . 52 carbide teeth,. 078-inch Kerf. 1-inch arbor size, -note: designed for use with Evolution saws or other low RPM saws.
2. Evolution Power Tools #ad
Evolution RAGE255BLADE- 10” Multi-Material Blade #adEvolution Power Tools #ad
- No coolant required. Cuts through steel, aluminum, wood and plastic. Produce virtually no heat, burrs, or sparks.
3. Evolution #ad
Evolution 10 Inch Multi Material Diamond Blade With Segmented Edge, 1 In Bore, Multi-Purpose & Metal Cutting Diamond Blade #adEvolution #ad
- Multi-material cutting: one saw & one blade will cut most common building materials including ferrous & non-ferrous metals, tiles, reinforced concrete, bricks, plastics & more saving you time and money.
Compatible with the R255DCT Concrete Cutting Saw. 30x longer life: up to 30x longer blade life than abrasive discs when cutting metal Diamond cutting edge is incredibly tough and can make over 1, 000 cuts through steel. Segmented rim design with sub-segmented cutting edge improves efficiency & removes debris from the cut.
Constant diameter: steel blade body with diamond cutting edge maintains its full diameter so you have maximum cutting capacity for the lifetime of the blade. Cleaner & safer: the steel body won’t shatter, less sparks & less odour vs abrasive discs, unlike abrasives, which can cause serious injury Less dust, make this a safer cutting solution.
4. Evolution Power Tools #ad
Evolution Power Tools R255SMSDB+ 15 Amp 10 in. Premium Dual Bevel Sliding Miter Saw w/Laser and Multi-Material Cutting Blade #adEvolution Power Tools #ad
- Features - large 11-13/16" x 3-1/2" cutting capacity, ergonomic Horizontal Trigger With Comfortable Grip, Integrated Carry Handles For Easy Transportation And 13Ft Cable.
Multi-material - premium japanese tungsten carbide Tipped Tct Blade Included Cuts Wood, Wood With Embedded Nails, Steel, Aluminum, Plastic & More.
Powerful – 15a motor optimised gearbox and blade System, Increases Motor And Blade Life To Cut Through A Variety Of Materials With Ease. Accurate - precision cutting with laser guidance, trench cut facility, 11-13/16" slide, 0˚ - 45˚ double Bevel And 50° - 50° Mitre Settings, Covers All Common Cutting Angles.
5. Evolution #ad
10, Evolution, RAGE5-S Power Tools RAGE5S 10" TCT Multi-Material Table Saw #adEvolution #ad
- Depth of cut at 90° and 2-1/4 in. For added safety, the included push stick offers safer operation when handling off cuts and the huge saw table features left and right table extensions to support wide work-pieces with a table surface area of 47-1/4 x 25-3/16 inch.
Rip cutting, assisted by an adjustable, full-length, parallel fence with measuring rail guide ensures reliable smooth square cutting every time. Set the blade to the desired angle up to 45 degrees bevel tilt and up to 60 degrees miter which covers all common cutting angles.
Raise and lower the blade height for trench cuts with this folding table saw. The included 28t japanese tct saw blade tungsten carbide tipped blade allows the table saw to cut effortlessly through steel, wood with embedded nails, aluminium, plastic and more.
Depth of cut at 45° bevel. The all in one rage 5-s table saw offers a collapsible frame with wheels for easy storage and portability meaning there is no need for use of a miter saw stand. 3 years limited warranty included. Achieve 3-1/4 in. The 15a optimised gearbox and blade system increases motor and blade life to cut through a variety of materials including steel, even wood with embedded nails and plastic, aluminium, wood, all with just one blade that comes included with this table saw.
6. Evolution #ad
Evolution Saw Blades For Aluminum, 10 Inch Circular Saw Blade 10BLADEAL #adEvolution #ad
- Cuts aluminum and other non-ferrous metals without heat, burrs or coolant. Caution: abrasive saws and cold cut saws operate at different speeds respective to the blade type being used.
These saw blades are rated for cutting Mild Steel materials such as square tube, tube, pipe, mild steel plate, angle iron, and other ferrous metals.
Creates an Instantly Workable Finish. Cold cut saw blades use a significantly lower RPM than abrasive saw blades. Virtually No Sparks. Unless you can adjust the rpm, never put a cold cut saw blade in a saw that is rated to use abrasive saw blades as the vibration from the higher RPM can damage or destroy the cold cut saw blade.
7. Evolution #ad
Evolution Saw Multipurpose RAGE3 Blade, RAGE255BLADE, 10 Inch Circular Saw Blade #adEvolution #ad
- The cutting blades are not limited to the these materials, but perform at their peak when cutting them specifically. Creates an Instantly Workable Finish. These saw blades are rated for cutting wood materials like boards or MDF and metals such as square tube, tube, mild steel plate, angle iron, pipe, and other non-ferrous metals.
Cuts wood, mild steel, brass, wood with nails, copper, plastics and other materials without heat, burrs or coolant. Compatible with Evolution Rage Saw.
8. Benchmark Abrasives #ad
Benchmark Abrasives 10" 52 Tooth Tungsten Carbide Tips Saw Blade for Thin Steel and Ferrous Metals #adBenchmark Abrasives #ad
- Arbor - 1" with 5/8" bushing. Benchmark abrasives blades have been designed to maximize performance on thin/mild steel and other ferrous metals.
Material applications include square tube, angle iron, thin steel plate, rebar, pipe, tube, flat stock and other ferrous metals. 52 carbide Teeth. Do not exceed an RPM of 5, 200 .
9. JIUNENG #ad
JIUNENG 10 inch 60 Tooth Wood Cutting Disc Carbide Tipped Circular Saw Blade for Cutting Hard & Soft Wood with 1inch Arbor #adJIUNENG #ad
- Circular miter-saw blades is ideal for all purpose including softwood, plywood, pressure-treated wood, hardwood, lumber, chip board and more.10-inch 60t ultra fine finish cut-off blade with a laser-cut 1-inch Hole，a ring 1-inch to 7/8inch hole.
High quality carbide coated tips provide hardness, abrasion, sliding wear, erosion, durability and toughness to protect against fretting, galling and impact. Pro-quality, construction grade steel blade with precision sharp titanium carbide tips. Great for floor Cutting: laminates, solid wood and engineered wood flooring.
10. Evolution #ad
Evolution Power Tools R255SMS+ 10" Multi-Material Compound Sliding Miter Saw Plus #adEvolution #ad
- Cut to within +/- 05˚ with 0° - 45° bevel tilt and 50˚ - 50˚ miter angles With quick click miter stops at 0˚, 22. 5, 30, 15, and 45˚ both left & right. Includes 10 inch blade, dust bag, laser guidance, 10 ft rubber power cord, and quick-release hold down Clamp.
Designed to cut a wide range of materials without changing blades. Impressive hi-torque motor, 15 amp saw with adjustable depth and laser precision guidance. Manufacturer's 3 year limited warranty.