As an Amazon Associate I earn from qualifying purchases.
CNCTOPBAOS #ad - Stepper motor: 2-phase nema17 stepper motor. Size: 128mm*122mm*85MM. Chuck type:65mm 3 Jaw Chuck. Center height: 54MM. Reducing ratio: 4:1.
CNCTOPBAOS #ad - Reducing ratio6:1. Productmodel: k11-80mm ; Chuck Type: 80mm three jaw chuck;. Tailstock65mm tailstock ; Total height:115mm ; Top tip: Activity type. Stepper motornema 23 stepper motor / motor Size:57x57x76mm / motor wire:4pcs / phase:2 / 8mm diameter shaft / 1.
CNCTOPBAOS #ad - Center height: 65mm;Total height: 115mm. Chuck type:k12-100mm 4 Jaw Chuck. Reducing ratio: 6:1 belt deceleration mode. Stepper motor: nema23 57mm 3A 2-phase 4 wire. Accessories: Set of Anti-claw and wrenches.
BUBUQD #ad - 4th axis for cnc router reducing ratio: 8:1. 5th axis rotary reducing ratio: 6:1. Cnc engraving machine rotary axis. Cnc router rotary table product Dimensions:H160 * L440 *W150 MM. Axis rotary table.
CNCTOPBAOS #ad - Reducing ratio:50:1 only have 50:1 type. Accessories: Set of Anti-claw and wrenches. Stepper motor: nema23 2-phase 57 stepper motor. Chuck type:gearbox k11-100mm 3 Jaw Chuck;Zero Backlash with Gapless harmonic gearbox reducer. Center height: 65mm;Total height: 115mm.
CNCTOPBAOS #ad - Center height: 65mm;Total height: 115mm. Accessories: Set of Anti-claw and wrenches. Stepper motor: nema23 2-phase 57 stepper motor. Chuck type:k11-100mm 3 Jaw Chuck. Reducing ratio: 6:1belt deceleration mode.
Genmitsu #ad - The 3040 aluminum spoilboard b08vnlp24c and 3040 mdf Spoilboard B08WZ8RV3Y for this extension kit are also available to buy. Capable of cutting all types of plastics, and PCBs, acrylics, soft aluminum, PVCs, woods, the Genmitsu can be used on a wide range of projects and materials. All components do not need to be positioned, which greatly reduces the difficulty of assembly and improves the working accuracy.
Support: assembly instructions and user guide could be found at the Product Guides and Documents Section below. Optional upgraded parts: super size your 3018 cnc to a 3040 by getting a genmitsu 3040 y-axis extension kit b08p2S3JWP.
If you get stuck, check out the SainSmart Resource Center see at User Guide or contact us with any questions that arise. New version: genmitsu cnc 3018-pro is an upgraded version of 3018. Its dependability and simplicity make grbL an industry standard, a high-performance open-source software for controlling movement, so there’s no lack of support and resources available when you get stuck. The base height is raised to 4cm for better stability.
FoxAlien #ad - It takes about 20-30mins to fully assembly. It supports windows xP/7/10, Linux and Mac OS. Masuter 4040 is a budget-friendly cnc router with large working area of 400 x 380 x 55mm 15. 75” x 14.
96” x 2. 16”. Masuter 4040 is capable to engrave, MDF, cut and drill many kinds of material such as wood, acrylic and resin etc. Max moving speed is 2000mm/min and spindle speed range is 0~10000 The machine will go to home with simply press the button.
The machine is compatible with Grbl software. Recommended settings: speed-1000mm/min; depth per pass-02mm; plunge rate-200mm/min. Add-ons sold separately. Home function and emergency-stop button are integrated on the machine. It also supports add-ons such as offline controller, 300W spindle and power modules. Main parts are pre-assembled.
BOSCH #ad - Benchtop router table design – Features a large aluminum top for extended work area, durability and precision. Extra tall aluminum fence – Has adjustable faceplates and feather boards to maximize precision and versatility.
Dedicated standard dust-collection port – Fits standard 2-1/2 inch vacuum hoses for debris-free operation to help keep your work area clean. Cord-wrap storage – Stores 6 foot power cord.
Genmitsu #ad - Equip your machine with an optional rotary 4th Axis or High Powered Laser Modules with up to 15W of true power output. Turning your ideas into the next fun project or your own work of art will be much easier with Carveco Maker. We will email you the subscription link after you place the order. Easy to set up: the pre-assembled module of xyz axis and wires dramatically reduces effort of assembly, allowing you to start carving your projects in less time.
3-month carveco Maker Subscription is included. No additional parts required: everything you need out of the box, speed control, including XYZ axis limit switches, no stripped down kits or addons, the genmitsu PROVerXL 4030 CNC router already includes all of the accessories and components you need at an affordable price, emergency stop switches, Z-probe and more.
Precision and performance: rigid c-beam structure, vinyl, foams, and carving operations on various materials including wood, MDF, Y-axis Dual screw drive, drilling, Leadscrew Driven, Z-Axis Optical Axis Drive delivers more stability than the traditional v-slot drive. Built to suit your needs: the proverxl cnc platform is just the beginning, and up to 40” x 40” 1000 x 1000mm. Evolve with your cnc, upgrade as you go, if you are looking for an even larger machine get the upgrade kit available in 2 additional sizes 24”x 24” 600 x 600mm, or start big and get to making MORE. It's ideal for an endless variety of cutting, plastics, and aluminum.
1. CNCTOPBAOS
#adCNC Milling Machine Rotational Axis CNC Router Rotary Table Rotary a axis 4th Axis 65mm 3 Jaw Chuck Dividing Head w/ Nema17 stepper motor w/ 54mm Tailstock Reducing ratio 4:1 for CNC Engraving Machine
#adMore information #ad
| Brand | CNCTOPBAOS #ad |
| Manufacturer | Changzhou Rattm Motor Co.,Ltd #ad |
| Part Number | S23 |
More information #ad
2. CNCTOPBAOS
#adCNC Router Engraving Machine Rotational 4th Axis Rotary Table A Axis 3 jaw 80mm chuck+65mm Tailstock CNC dividing head+Nema23 Stepper Motor Milling Lathe Chuck Fourth Axis K11-80mm Reducing Ratio 6:1
#adMore information #ad
8 degree / holding torque: 270 oz-in, 180N. Cm / current:3A. Accessoriescome with 3pcs anti-claw and 1pcs wrench.| Brand | CNCTOPBAOS #ad |
| Manufacturer | Changzhou Rattm Motor Co.,Ltd #ad |
| Part Number | S23 |
More information #ad
3. CNCTOPBAOS
#adK12-100mm CNC Router Milling Machine Rotational Axis 4th Axis A axis Rotary Table A axis 100mm 4 jaw chuck dividing head with 65mm Tailstock Reducing ratio 6:1 for CNC Engraving Machine
#adMore information #ad
| Brand | CNCTOPBAOS #ad |
| Manufacturer | Changzhou Rattm Motor Co.,Ltd #ad |
| Part Number | S23 |
More information #ad
4. BUBUQD
#adCNC Rotary Table Rotational Axis A C Axis Engraving Machine Rotary 4th 5th Axis Router
#adMore information #ad
| Brand | BUBUQD #ad |
| Manufacturer | BUBUQD #ad |
More information #ad
5. CNCTOPBAOS
#adRotational 4th Axis A axis Rotary table Fourth axis 3 Jaw Chuck Gapless harmonic reducer gearbox stepper motor K11-100mm dividing head with 65mm Tailstock for CNC Router Engraving Milling Machine
#adMore information #ad
| Brand | CNCTOPBAOS #ad |
| Manufacturer | Changzhou Rattm Motor Co.,Ltd #ad |
| Part Number | S23 |
More information #ad
6. CNCTOPBAOS
#adK11-100mm CNC Router 4th Axis Rotational Axis A axis 100mm 3 Jaw Chuck Rotary Table Dividing Head Reducing ratio 6:1 with 65mm Tailstock for CNC Milling Engraving Machine
#adMore information #ad
| Brand | CNCTOPBAOS #ad |
| Manufacturer | Changzhou Rattm Motor Co.,Ltd #ad |
| Part Number | S23 |
More information #ad
7. Genmitsu
#adGenmitsu CNC 3018-PRO Router Kit GRBL Control 3 Axis Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine, XYZ Working Area 300x180x45mm
#adSupport: assembly instructions and user guide could be found at the Product Guides and Documents Section below. Optional upgraded parts: super size your 3018 cnc to a 3040 by getting a genmitsu 3040 y-axis extension kit b08p2S3JWP.
More information #ad
Controller software: the genmitsu 3018-pro uses grbl, and runs on arduino. Includes carveco maker cam design software and CANDLE for controlling your machine and running your GCODE design files. Upgraded power adapter: ul approved and out-of-the-box support for the drop in 20, 000rpm Spindle, no need to modify G-code to ramp up to full speed. If you get stuck, check out the SainSmart Resource Center see at User Guide or contact us with any questions that arise. New version: genmitsu cnc 3018-pro is an upgraded version of 3018. Its dependability and simplicity make grbL an industry standard, a high-performance open-source software for controlling movement, so there’s no lack of support and resources available when you get stuck. The base height is raised to 4cm for better stability.
| Brand | Genmitsu #ad |
| Manufacturer | SainSmart #ad |
| Weight | 15.33 Pounds |
| Part Number | B07P6K9BL3 |
More information #ad
8. FoxAlien
#adMasuter 4040 CNC Router Machine, 3-Axis Engraving Milling Machine 15.75x14.96” Working Area for Carving Cutting Wood Acrylic MDF Nylon
#ad96” x 2. 16”. Masuter 4040 is capable to engrave, MDF, cut and drill many kinds of material such as wood, acrylic and resin etc. Max moving speed is 2000mm/min and spindle speed range is 0~10000 The machine will go to home with simply press the button.
More information #ad
The control board is equipped with an upgraded 32-bit chip which works more efficient and stable. It uses a 60w spindle and NEMA17 stepper motors. The machine is compatible with Grbl software. Recommended settings: speed-1000mm/min; depth per pass-02mm; plunge rate-200mm/min. Add-ons sold separately. Home function and emergency-stop button are integrated on the machine. It also supports add-ons such as offline controller, 300W spindle and power modules. Main parts are pre-assembled.
| Brand | FoxAlien #ad |
| Manufacturer | FoxAlien #ad |
| Part Number | Masuter 4040 |
| Model | Masuter 4040 |
More information #ad
9. BOSCH
#adBosch Benchtop Router Table RA1181
#adDedicated standard dust-collection port – Fits standard 2-1/2 inch vacuum hoses for debris-free operation to help keep your work area clean. Cord-wrap storage – Stores 6 foot power cord.
More information #ad
Easy-to-use adjustable feather boards – Attach to fence and table, providing additional guidance and kickback protection. Storage pocket – Allows storage of router accessories. Rigid aluminum mounting plate – Pre-drilled for compatibility with a variety of routers and for above-table height adjustment. Accessory slot – accepts feather boards and 3/4 inch optional accessories such as a miter gauge.| Brand | BOSCH #ad |
| Manufacturer | Bosch #ad |
| Height | 14.5 Inches |
| Length | 22.75 Inches |
| Weight | 30 Pounds |
| Width | 27 Inches |
| Part Number | RA1181 |
| Model | RA1181 |
| Warranty | 30 day money back guarantee, 1 yr limited warranty, 1 yr service protection plan |
More information #ad
10. Genmitsu
#adWorking Area 400 x 300 x 110mm 15.7''x11.8''x4.3'', 3 Axis Milling Cutting Engraving Machine, Genmitsu CNC Router Machine PROVerXL 4030 for Wood Metal Acrylic MDF Carving Arts Crafts DIY Design
#ad3-month carveco Maker Subscription is included. No additional parts required: everything you need out of the box, speed control, including XYZ axis limit switches, no stripped down kits or addons, the genmitsu PROVerXL 4030 CNC router already includes all of the accessories and components you need at an affordable price, emergency stop switches, Z-probe and more.
More information #ad
More power: new completely redesigned control box and drive system, precision NEMA 23 stepper motors, beefy C-BEAM Frame, High Power Spindle and included adapter for a drop in Dewalt DWP611 upgrade. Precision and performance: rigid c-beam structure, vinyl, foams, and carving operations on various materials including wood, MDF, Y-axis Dual screw drive, drilling, Leadscrew Driven, Z-Axis Optical Axis Drive delivers more stability than the traditional v-slot drive. Built to suit your needs: the proverxl cnc platform is just the beginning, and up to 40” x 40” 1000 x 1000mm. Evolve with your cnc, upgrade as you go, if you are looking for an even larger machine get the upgrade kit available in 2 additional sizes 24”x 24” 600 x 600mm, or start big and get to making MORE. It's ideal for an endless variety of cutting, plastics, and aluminum.
| Brand | Genmitsu #ad |
| Manufacturer | Genmitsu #ad |
| Part Number | PROVerXL 4030 |
More information #ad
