As an Amazon Associate I earn from qualifying purchases.
Adjustable force: for a heavy mark, the cap is screwed down. No hammer needed: this punch has a mechanism that automatically strikes a blow when downward pressure is applied No hammer is required, making one hand always free to steady the work.
Pre-drilling tool: the 18a automatic center punch is a tool with a conical point, which is used making an indentation in an object This allows you to safely drill a hole at the same spot without slipping. Progressively lighter marks are obtained by turning the cap upward Marks made by the point are uniform in depth and size for each setting.


Comfort: knurled non-slip surface allows is easier to grip and along with a precision centered tip, increases control for accurate placement of holes.

Steel construction: this center punch is made of hardened steel and has a knurled finger grip for ease of handling and greater punching control Its tempered head makes it less likely to fracture from a hard, off-center blow.
Progressively lighter marks are obtained by turning the cap upward Marks made by the point are uniform in depth and size for each setting. Pre-drilling tool: the c18 automatic heavy duty center Punch is a tool with a conical point, which is used making an indentation in an object This allows you to safely drill a hole at the same spot without slipping.

Adjustable spring tension - adjustable spring tension cap for light or heavy strokes and marking. Adjustable spring tension - adjustable spring tension cap for light or heavy strokes and marking.
All steel 5" body - center punch has an all-steel body, knurled finger grip and rust-resistant black oxide finish, 1/2" body diameter. Automatic punch depth - center punch can be set for repetitive work. Steel point - threaded, replaceable hardened steel point and shaft.

More power. Use as an emergency car window escape: if you have been looking for an car emergency escape tool, then your search is over! Thats because our automatic center punch is not only for wood and metal but able to shatter glass car windows which means that you can leave one in your car and always be prepared.
No more hammering! Safety tool. Trusted brand. This forge industrial brass center Punch gives your drill a start point and makes it easier for you so it doesn’t slip in tight spots. That's why we always offer a 100% Satisfaction Guarantee. Don't let your drill walk again! Your satisfaction is our priority. Just use in the corner of a window and it will either shatter and fall out, or easily be pushed out and escape. Extreme strength.



Versatile: this spring loaded center punch tool is suitable for a variety of tasks ranging from construction to automotive and can be used as an awl for belts or a glass window breaker for car safety.
Heavy duty: the chrome plated shank body withstands high impact force and stands the test of time with extremely strong reinforced S2 steel tips that hold up to hard surfaces to pack a “drill punch”.

Pre-drilling tool: the 18aa automatic center punch is a tool with a conical point, which is used making an indentation in an object This allows you to safely drill a hole at the same spot without slipping.
Knurled finger grips for ease of handling. No hammer needed: this punch has a mechanism that automatically strikes a blow when downward pressure is applied No hammer is required, making one hand always free to steady the work. Removable point: the point can be easily removed for regrinding and/or replacement Always wear safety goggles when using striking tools. Steel is hardened and tempered.
1. Starrett
#ad
Starrett 18A Automatic Center Punch with Hardened Steel Metal, No. 4 Graduation, Universal Tool for Machinists and Carpenters with Adjustable Knurled Cap to Control Blow Force
#adStarrett #ad - Steel construction: this center punch is made of hardened steel and has a knurled finger grip for ease of handling and greater punching control Its tempered head makes it less likely to fracture from a hard, off-center blow.Adjustable force: for a heavy mark, the cap is screwed down. No hammer needed: this punch has a mechanism that automatically strikes a blow when downward pressure is applied No hammer is required, making one hand always free to steady the work.
More information #ad
Removable point: the point can be easily removed for regrinding and/or replacement Always wear safety goggles when using striking tools. Pre-drilling tool: the 18a automatic center punch is a tool with a conical point, which is used making an indentation in an object This allows you to safely drill a hole at the same spot without slipping. Progressively lighter marks are obtained by turning the cap upward Marks made by the point are uniform in depth and size for each setting.
Brand | Starrett #ad |
Manufacturer | STAKF #ad |
Height | 5.5 Inches |
Length | 1 Inches |
Weight | 0.2 Pounds |
Width | 1.1 Inches |
Part Number | 18A |
Model | 18A |
Warranty | One Year on defects in material and workmanship |
More information #ad
2. General Tools
#ad
General Tools 89 Stainless Steel Automatic Center Punch with Adjustable Stroke
#adGeneral Tools #ad - One-handed spring impact – automatic center punch has one-handed impact operation, no hammer needed. Marks hole locations – accurate center punch prevents drill bit from traveling, starts drill, nail or screw holes.More information #ad
Adjustable spring tension - spring tension adjusts for light or heavy strokes, marking, punching and staking. Stainless steel body – stainless steel rounded shank body has knurled finger grip.Brand | General Tools #ad |
Manufacturer | General Tools #ad |
Height | 9 Inches |
Length | 0.63 Inches |
Weight | 0 Pounds |
Width | 2.13 Inches |
Part Number | 89 |
Model | 89 |
Warranty | 90 days material and workmanship |
More information #ad
3. Neiko
#ad
NEIKO 02639A Super Duty 6” Automatic Center Hole Punch | Premium S2 Steel Tip | Chrome Plated Shank Body | Adjustable Spring Impact | Knurled Non-Slip Surface | One-Handed Spring Impact Operation
#adNeiko #ad - Durable: chrome plated Shank Body withstands high impact force and is corrosion resistant. Easy to use: automatic center punch allows for one-handed operation with no need for a hammer.Comfort: knurled non-slip surface allows is easier to grip and along with a precision centered tip, increases control for accurate placement of holes.
More information #ad
Adjustable: spring loaded center punch uses spring tension and can be adjusted for light or heavy strokes, punching, marking, or staking. Quality this center punch is equipped with a hardened S2 steel tip that holds up against all surfaces like wood, glass, plastic, metal, and leather.Brand | Neiko #ad |
Manufacturer | Neiko #ad |
Part Number | 02639A |
Model | 02639A |
More information #ad
4. Starrett
#ad
Starrett 18C Automatic Center Punch with Heavy Duty Hardened Steel Metal, Universal Tool for Machinists, 5.14" x 11/16", Carpenters with Adjustable Knurled Cap to Control Blow Force
#adStarrett #ad - Adjustable force: for a heavy mark, the cap is screwed down. No hammer needed: this punch has a mechanism that automatically strikes a blow when downward pressure is applied No hammer is required, making one hand always free to steady the work.Steel construction: this center punch is made of hardened steel and has a knurled finger grip for ease of handling and greater punching control Its tempered head makes it less likely to fracture from a hard, off-center blow.
More information #ad
Removable point: the point can be easily removed for sharpening or replacement Always wear safety goggles when using striking tools. Progressively lighter marks are obtained by turning the cap upward Marks made by the point are uniform in depth and size for each setting. Pre-drilling tool: the c18 automatic heavy duty center Punch is a tool with a conical point, which is used making an indentation in an object This allows you to safely drill a hole at the same spot without slipping.
Brand | Starrett #ad |
Manufacturer | STAKF #ad |
Height | 0.4 Inches |
Length | 5.4 Inches |
Weight | 0.31 Pounds |
Width | 1.1 Inches |
Part Number | 18C |
Model | 18C |
More information #ad
5. General Tools
#ad
General Tools 79 Steel Automatic Center Punch , Black
#adGeneral Tools #ad - Automatic punch depth - center punch can be set for repetitive work. Delivers a high impact strike - one-handed spring-loaded impact operation, no hammer required. Delivers a high impact strike - one-handed spring-loaded impact operation, no hammer required.Adjustable spring tension - adjustable spring tension cap for light or heavy strokes and marking. Adjustable spring tension - adjustable spring tension cap for light or heavy strokes and marking.
More information #ad
Steel point - threaded, replaceable hardened steel point and shaft. All steel 5" body - center punch has an all-steel body, knurled finger grip and rust-resistant black oxide finish, 1/2" body diameter. All steel 5" body - center punch has an all-steel body, knurled finger grip and rust-resistant black oxide finish, 1/2" body diameter. Automatic punch depth - center punch can be set for repetitive work. Steel point - threaded, replaceable hardened steel point and shaft.
Brand | General Tools #ad |
Manufacturer | General Tools #ad |
Height | 1 Inches |
Length | 8 Inches |
Weight | 0.06 Pounds |
Width | 3 Inches |
Part Number | 79 |
Model | 79 |
Warranty | Manufacturer |
More information #ad
6. SANDOR
#ad
Super Strong Automatic Center Punch, 5 inch Black Steel Spring Loaded Center Hole Punch with Adjustable Tension, Hand Tool for Metal or Wood with Zippered Hard Shell Carry Case, Pack of 2
#adSANDOR #ad - Each metal hardened and chrome plated tip lasts for hundreds of strikes so you can get the job done! Adjustable tension. It's that simple! Amazing tool that makes it easier to drill: picture having an automatic hand punch tool with a spring loaded mechanism that actually works and makes a solid mark in wood, metal, aluminum, brass, steel, copper and more.More power. Use as an emergency car window escape: if you have been looking for an car emergency escape tool, then your search is over! Thats because our automatic center punch is not only for wood and metal but able to shatter glass car windows which means that you can leave one in your car and always be prepared.
More information #ad
At sandor tool we only use the highest quality materials in our products, and we go the extra mile to stand by our tools. No more hammering! Safety tool. Trusted brand. This forge industrial brass center Punch gives your drill a start point and makes it easier for you so it doesn’t slip in tight spots. That's why we always offer a 100% Satisfaction Guarantee. Don't let your drill walk again! Your satisfaction is our priority. Just use in the corner of a window and it will either shatter and fall out, or easily be pushed out and escape. Extreme strength.
Brand | SANDOR #ad |
Manufacturer | SANDOR #ad |
Part Number | Black_Center_Punch_2PK |
More information #ad
7. HORUSDY
#ad
Center Punch, HORUSDY 2-Pack Super Strong 6" Automatic Centre Hole Punch, Adjustable Impact
#adHORUSDY #ad - One handed operation, simply adjust to desired spring tension, press firmly against work piece for automatic centre punch. One-handed operation makes accurate marks without the need for a hammer.More information #ad
Manufactured in industrial black and chrome finish with knurled body for extra grip. Features adjustable spring loaded design for variable impact strength and hardened tip for long service life. Can be used for vehicle emergencies as a side window rescue glass breaking tool.Brand | HORUSDY #ad |
Manufacturer | HORUSDY #ad |
Height | 2 Inches |
Length | 8 Inches |
Width | 5 Inches |
Part Number | 97285 |
More information #ad
8. General Tools
#ad
General Tools 87 Pocket Automatic Center Punch
#adGeneral Tools #ad - Hardened tool steel tip is replaceable. Made in China. Spring-operated automatic center punch. Works on metal, plastic, wood and other materials. Adjusts for light or heavy markings; pencil slim design with a pocket clip.More information #ad
Designed for punching, marking, scribing and starting nail or screw holes. Lightweight aluminum body with replaceable alloy steel point. 8. 6 inches long; weighs 5. 4 ounces.Brand | General Tools #ad |
Manufacturer | General Tools #ad |
Height | 1.63 Inches |
Length | 8.63 Inches |
Weight | 0.07 Pounds |
Width | 3.06 Inches |
Part Number | 87 |
Model | 87XXX |
Warranty | Manufacturer |
More information #ad
9. Neiko
#ad
NEIKO 02638A 5-Inch Automatic Center Hole Punch | Adjustable Impact Spring Loaded Puncher Tool
#adNeiko #ad - Adjustable: each 5-inch center punch tool is spring loaded with an adjustable stroke that can accommodate various types of materials such as wood, plastic, metal, glass, and leather for all your home improvement projects.Versatile: this spring loaded center punch tool is suitable for a variety of tasks ranging from construction to automotive and can be used as an awl for belts or a glass window breaker for car safety.
More information #ad
Grip: the knurled non-slip surface and precision centered tip increases force control for more accurate and precise holes in your projects. Convenience: the active spring-driven action and hard steel awl tip makes punching easier on the job as strike force can be increased or decreased with the adjustable cap and activated with a firm downward push. Heavy duty: the chrome plated shank body withstands high impact force and stands the test of time with extremely strong reinforced S2 steel tips that hold up to hard surfaces to pack a “drill punch”.
Brand | Neiko #ad |
Manufacturer | Ridgerock Tools Inc. #ad |
Height | 1.2 Inches |
Length | 7.7 Inches |
Weight | 0.15 Pounds |
Width | 2.8 Inches |
Part Number | 02638A |
Model | 02638A |
More information #ad
10. Starrett
#ad
Starrett 18AA Automatic Center Punch with Hardened Steel Metal, Universal Tool for Machinists and Carpenters with Adjustable Knurled Cap to Control Blow Force, 4" Length, 7/16" Graduation
#adStarrett #ad - Adjustable Stroke. Steel construction: this center punch is made of hardened steel and has a knurled finger grip for ease of handling and greater punching control Its tempered head makes it less likely to fracture from a hard, off-center blow.Pre-drilling tool: the 18aa automatic center punch is a tool with a conical point, which is used making an indentation in an object This allows you to safely drill a hole at the same spot without slipping.
More information #ad
Adjustable force: for a heavy mark, the cap is screwed down. Progressively lighter marks are obtained by turning the cap upward Marks made by the point are uniform in depth and size for each setting. Knurled finger grips for ease of handling. No hammer needed: this punch has a mechanism that automatically strikes a blow when downward pressure is applied No hammer is required, making one hand always free to steady the work. Removable point: the point can be easily removed for regrinding and/or replacement Always wear safety goggles when using striking tools. Steel is hardened and tempered.
Brand | Starrett #ad |
Manufacturer | Starrett #ad |
Height | 4.1 Inches |
Length | 1 Inches |
Weight | 0.01 Pounds |
Width | 0.7 Inches |
Part Number | 18AA |
Model | 18AA |
Warranty | One Year on defects in material and workmanship |
More information #ad