Top 10 4×12 Ceiling Register – Registers, Grilles & Vents

As an Amazon Associate I earn from qualifying purchases.

1. HBW

#ad

12" x 4" Adjustable Blade Sidewall Ceiling Register Vent Cover Diffuser Heavy Duty Stamped Steel Listed Size is for Duct Opening or Inside Measurement

#ad
HBW #ad - Individually shrink wrapped with card board pad in the back for extra protection. Multi-shutter damper with easy handle to adjust desired among of air flow. Adjustable blade allows all direction air deflection. The listed size 12" x 4" is for the inside duct opening measurement. Heavy duty stamped steel face for long lasting use.
BrandHBW #ad
ManufacturerHBW #ad
Height1.5 Inches
Length14 Inches
Width6 Inches

2. Metal-Fab/Air-Craft

#ad

DUCT COVER & DIFFUSER, Flat Stamped Face, 12"w X 4"h 3-Way AIR SUPPLY GRILLE, White Outer Dimensions: 13.75"w X 5.75"h

#ad
Metal-Fab/Air-Craft #ad - Easy unrestricted air flow deflection For Your HVAC System - 1/2 Inch Spaced Fins. 12"w x 4"h is the size for the duct opening measurement only actual front end frame outer dimensions are 13.

75"w x 5. 75"h - see below in description how to measure a grillE. High quality solid stamped steel construction, no sharp edges, 2 Recessed Screw Holes On Each Side with Screws Included, no scuff powder coat durable Finish, EASY INSTALLATION. Quality packaging - carefully shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for Quality. Louvered supply grille for sidewall or ceiling application with SmoothGlide Technology, Easy Opening and Closing Back Dampers For Better Airflow Control, Quiet Lever.
BrandMetal-Fab/Air-Craft #ad
ManufacturerMetal-Fab/Air-Craft #ad
Part NumberMFSCR124W3
ModelCECOMINOD055248
Warrantymanufacturer

3. HVAC Premium

#ad

Sidewall or Ceiling, Grille Register, Vent Cover, High Airflow, White Outer Dimensions: 13.75"w X 5.75"h, 12"w X 4"h 2-Way-Flat Stamped Steel

#ad
HVAC Premium #ad - Louvered supply grille for sidewall or ceiling application with SmoothGlide Technology, Easy Opening and Closing Back Dampers For Better Airflow Control, Quiet Lever.

12"w x 4"h is the size for the duct opening measurement only actual front end frame outer dimensions are 13. 75"w x 5. 75"h - see below in description how to measure a grillE. Easy unrestricted air flow deflection For Your HVAC System - 1/2 Inch Spaced Fins. High quality solid stamped steel construction, 2 recessed screw holes on Each Side with Screws Included, No Scuff Powder Coat Durable Finish, No Sharp Edges, EASY INSTALLATION. Quality packaging - carefully shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for Quality.
BrandHVAC Premium #ad
ManufacturerHVAC Premium #ad
Part NumberMFSCR124W2
Warrantymanufacturer

4. HBW

#ad

Actual Outside Dimension 13.75" X 5.75", Vent Cover, HBW 12"x 4" Duct Opening Size 3-Way Stamped Face Steel Ceiling/sidewall Air Supply Register

#ad
HBW #ad - Individually shrink wrapped with card board pad in the back for extra protection. Stamped face steel construction with 1/2" fin spacing for high air flow. Three way air Flow deflection Design. The listed size 12"x 4" is for inside duct opening measurement, actual outside dimension is 13. 75" x 5. 75". Multi-shutter damper with easy handle to adjust desired amount of air flow.
BrandHBW #ad
ManufacturerHBW #ad

5. Accord Ventilation

#ad

White, Accord ABSWWH41212 Sidewall/Ceiling Register with 4-Way Design, 12-Inch x 12-InchDuct Opening Measurements

#ad
Accord Ventilation #ad - Listed product sizes refer to the duct opening measurements, not the register itself. Steel construction for sidewall or ceiling application. 1/2-in spaced fins. The number of louvered columns and mounting holes will vary based on the size of the grille ordered. Four-way air deflection with a multi-shutter damper.
BrandAccord Ventilation #ad
ManufacturerAccord #ad
Height1.4 Inches
Length13.75 Inches
Width13.75 Inches
Part NumberABSWWH41212
ModelABSWWH41212

6. Accord Ventilation

#ad

White, 12-Inch x 4-InchDuct Opening Measurements, Accord ABSWWH2124 Sidewall/Ceiling Register with 2-Way Design

#ad
Accord Ventilation #ad - Steel construction for sidewall or ceiling application. Two-way air deflection with a multi-shutter damper. The number of louvered columns and mounting holes will vary based on the size of the grille ordered. Listed product sizes refer to the duct opening measurements, not the register itself. 1/2-in spaced fins.
BrandAccord Ventilation #ad
ManufacturerAccord #ad
Height1.25 Inches
Length13.75 Inches
Weight1.3 Pounds
Width5.75 Inches
Part NumberABSWWH2124
ModelABSWWH2124

7. Truaire

#ad

White, Truaire C103M 12X04Duct Opening Measurements 3-Way Supply 12-Inch by 4-Inch Sidewall or Ceiling Register Grille

#ad
Truaire #ad - The actual face size is 13. 75-inch in width and 5. 75-inch in height. High quality powder coated. High quality steel components, no plastic. Smoothglide damper. Model size indicates Duct Opening Measurements not Wall Opening Measurements.
BrandTruaire #ad
ManufacturerTru Aire #ad
Height13.9 Inches
Length1.8 Inches
Width5.9 Inches
Part NumberC103M 12X04
ModelC103M 12X04

8. HBW

#ad

HBW 10"x 4" Duct Opening Size 1-Way Stamped Face Steel Ceiling/sidewall Air Supply Register, Actual Outside Dimension 11.75" X 5.75", Vent Cover

#ad
HBW #ad - Stamped face steel construction with 1/2" fin spacing for high air flow. The listed size 10"x 4" is for inside duct opening measurement, actual outside dimension is 11. 75" x 5. 75". Individually shrink wrapped with card board pad in the back for extra protection. Multi-shutter damper with easy handle to adjust desired amount of air flow. One way air Flow deflection Design.
BrandHBW #ad
ManufacturerHBW #ad
Height1.5 Inches
Length11.75 Inches
Width5.75 Inches

9. Decor Grates

#ad

Brushed Nickel Finish, Decor Grates SPH412-NKL Floor Register, 4x12

#ad
Decor Grates #ad - This is not a cheaper option, it’s the best option. Available in a variety of styles and finishes to match any decor. Frequent exposure to water and cleaning detergents will accelerate the rusting process.

Metal damper boxes rust and seize up, so we make our damper boxes with high impact plastic. The floor registers can simply be cleaned using a dry cloth. Scroll design steel plated - Brushed Nickel Finish floor register. Easy to install - Just drop into vent - no tools required. Useful tip: because of increased floor cleaning during this pandemic, we recommend removing your steel floor registers before cleaning your floor. Filter retainer and filter are sold separately.
BrandDecor Grates #ad
ManufacturerDecor Grates #ad
Height1.38 Inches
Length11.5 Inches
Weight0.99 Pounds
Width5.5 Inches
Part NumberSPH412-NKL
ModelSPH412-NKL
WarrantyLimited 12 month Warranty

10. HVAC Premium

#ad

HVAC Grille, Maximum Air Flow, 12" x 4", Adjustable Aluminum Curved Blades, 1-Way Air Vent

#ad
HVAC Premium #ad - 12" x 4" - opening vent hole - Neck Size dimension - actual size is approx 2" wider. Looks like It Was Just Waxed. Powder-coat finish - smooth, Shiny, scratch-Resistant, Beautiful. Quality packaging - carefully Shrink Wrapped with Cardboard Backing to Prevent Damage in Shipment. Screws included - easy unrestricted Air Flow For Your HVAC System. Smooth surface edges - run your Fingers Across The Surface To Feel The Smoothness.
BrandHVAC Premium #ad
ManufacturerHVAC Premium #ad
Part NumberMFACRA124W1