
Industrial & Scientific
Gizmo Dorks #ad - Made in the usa: single 1mm thick sheet installs quickly on top of existing flat build platforms e. G. Borosilicate glass using the 3M 468MP adhesive transfer tape. Abs and pla filaments along with many other materials print directly on to PEI surface without the need for additional adhesives, tapes, or slurry.
Remove film from both sides before using: Blue protective film guards against scratches during shipping and handling. Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results. Light sanding with 2400 grit paper will also give the PEI sheet more life. Remove the blue protective film from the PEI sheet.
Pei polyetherimide sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. Includes: 1x pei sheet, 1x full size 3m 468mp adhesive transfer tape, 5x 1" strips of 3M 468MP adhesive transfer tape. Carefully apply the 3m 468mp transfer Tape and use it to stick the PEI to the print bed.
Gizmo Dorks PEI Sheet 8" x 8" 203mm x 203mm 1mm Thick 3D Printer Build Surface with 3M 468MP Adhesive, Made in The USA #ad - How to use: cut the pEI sheet to size by scoring with a hobby knife. Abs and pla both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. The printed 3d parts will adhere to the PEI surface on a heated bed, and it will release or pop off when cooling down.
Both a sheet and strips of adhesive are included in each package.
More information about Gizmo Dorks #ad
Size: 213mm x 200mm x 3mm package includes: 1 x Smart glass Please note: The other products show in the picture are not included! Made from tempered with high transparence. If you want to make your printing platform flat enough, ideal stuff is glass sheet. Avoid replacing plastic film. High binding power when heating, easy to separate the plastic parts when cooling.
More information about Signstek A011 #ad
Similar products
Avoid replacing plastic film. Thickness : 05mm/002''. Size : 40 x 205cm/15. 7'' x 8. 1'' l*w. Get you out of the trouble when plastic film decreased viscosity after a period of usage. Package content : 1 x CPU Thermal Pad. Made from tempered with high transparence.
More information about uxcell a11121700ux0155 #ad
Similar products
In our kit we use ball joints to eliminate any tension created by misalignment between upper and lower bracket. Convenient feature of our kit is ability to allow fine adjustment of the each Z-rod length. Get you out of the trouble when plastic film decreased viscosity after a period of usage. Thickness : 0
Gulfcoast Robotics Z-Brace Frame Support Kit for Wanhao Duplicator i3 and Maker Select V1, V2 and V2.1 3D Printers #ad - 5mm/002''. Our kit is fully metal kit, no printed parts. Designed and manufactured by USA company. Material: Silicon glass. Cnc machined all metal design. Compatible with wanhao duplicator i3 and Maker Select V1, V2 and V2.
More information about Gulfcoast Robotics ZBRACE #ad
Similar products
High quality ultra flexible soft Silicone Rubber Copper Wire!Super Low Impedance, Highly Efficient!1. High quality ultra flexible soft Silicone Rubber Copper Wire!Super Low Impedance, Highly Efficient!2. High strand count copper core, 14 AWG silicone stranded wire has 400 strands 008 mm tinned copper wire, the copper strands are tinned, protecting them from corrosion and making it easier to solder.
BNTECHGO 14 Gauge Silicone Wire Ultra Flexible 6 feet high Temp 200 deg C 600V 14 AWG Silicone Wire 400 Strands of Tinned Copper Wire Stranded Wire Model Battery Cable Black and Red Each Color 3 ft #ad - 3. They are constructed with premium silicone rubber insulation. High temperature resistance 200 degree C, Low temperature resistance, in extreme cold -60 degree C. Rated voltage: 600 volts. Outside diameter 3. 5 mm, tolerance +/- 0
More information about bntechgo.com 8541758464 #ad
Similar products
High temperature resistance 200 degree C, in extreme cold -60 degree C. Rated voltage: 600 volts. Outside diameter 3. 5 mm, low temperature resistance, tolerance +/- 01 mm. 14 gauge silicone wire kit: 2 colors, each color 3 ft, red and black, total 6 feet. Bntechgo silicone wire are widely used for model planes, meters, lamps, model ships, household appliances, electric heating appliances, model cars, batteries, instruments, motor lead wire and digital fields.
Install Bay BVST10 Spade Terminal Vinyl Connector 16/14 Gauge #10, Blue 100-Pack #ad - Spade terminal Vinyl Connector. Compatible with wanhao duplicator i3 and Maker Select V1, V2 and V2. 1 3d printers. 16/14 gauge #10 High binding power when heating, easy to separate the plastic parts when cooling. For maker select plus 3d printer please check ASIN B07B3KD5GW.
More information about Metra Electronics Corp BVST10 #ad
Similar products
08 mm tinned copper wire, the copper strands are tinned, protecting them from corrosion and making it easier to solder. They are constructed with premium silicone rubber insulation. High temperature resistance 200 degree C, in extreme cold -60 degree C. Rated voltage: 600 volts. Outside diameter 3. 5 mm, low temperature resistance, tolerance +/- 0
Gulfcoast Robotics Thermistor Upgrade for Maker Select Plus and Wanhao Duplicator i3 Plus 3D Printers. #ad - 1 mm. 14 gauge silicone wire kit: 2 colors, each color 3 ft, red and black, total 6 feet. Bntechgo silicone wire are widely used for model planes, instruments, household appliances, model cars, electric heating appliances, meters, batteries, lamps, model ships, motor lead wire and digital fields. Spade terminal Vinyl Connector.
High accuracy: 1%. Cnc machined all metal design.
More information about Gulfcoast Robotics NTC3950_CWM #ad
Similar products
High temperature resistance 200 degree C, in extreme cold -60 degree C. Rated voltage: 600 volts. Outside diameter 3. 5 mm, low temperature resistance, tolerance +/- 01 mm. 14 gauge silicone wire kit: 2 colors, each color 3 ft, red and black, total 6 feet. Bntechgo silicone wire are widely used for model planes, household appliances, meters, electric heating appliances, lamps, model cars, model ships, instruments, batteries, motor lead wire and digital fields.
Signswise 2 Pack 5mm 40T Extruder Driver Feeder Gear Bore for Makerbot Mk7 Mk8 3D Printer #ad - Spade terminal Vinyl Connector. Specification material:stainless steel outer diameter:12mm Inner hole:5mm Height: 12mm The number of teeth: 40 teeth Made from tempered with high transparence. Get you out of the trouble when plastic film decreased viscosity after a period of usage. The number of teeth: 40 teeth.
Black anodized parts will look great on your 3D Printer.
More information about Signswise #ad
Similar products
. Size : 40 x 205cm/15. 7'' x 8. 1'' l*w. Get you out of the trouble when plastic film decreased viscosity after a period of usage. Cnc machined all metal design. Can hold temperature up to 300C with ceramic glue and fiberglass insulation on leads. They don't just keep the block clean, but also keep heat inside the hotend and off your print.
3pcs MK10 Silicone Socks Instead Ceramic Insulation for Wanhao Dupicator D4/I3/Dremel i3 Makerbot 2 QIDI Tech Flashforge Silicone Heater Block Cover #ad - Helps to keep the hotend temperature extremely stable, particularly if you use high-airflow cooling around the nozzle to cool the print. The covers simply push onto the front of the hotEnd with no disassembly - they will be a tight fit when first pushed on cold. High quality ultra flexible soft Silicone Rubber Copper Wire!Super Low Impedance, Highly Efficient!
Made of a heat-resistant, non-stick silicone material our socks will repel build-up of molten plastic. Designed and manufactured by USA Company.
More information about Funssor #ad
Similar products
For maker select plus 3d printer please check ASIN B07B3KD5GW. This really helps with sticky materials like co-polyesters and filled-composite materials that like to build up on nozzles. Very useful silicone socks: will keep your heater block clean and free from burnt and blackened plastic. Black anodized parts will look great on your 3D Printer.
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black #ad - Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F. 2 pieces makerbot mk7 mk8 extruder Driver Feeder Gear Bore 5mm 40T 3d Printer. Welcome to hatchbox 3d products our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality.
Weight : 103g. Made from tempered with high transparence. When hot the silicone will expand to the correct size to fit the hotend snugly.
More information about HATCHBOX 3D PLA-1KG1.75-BLK #ad
Similar products
Helps to keep the hotend temperature extremely stable, particularly if you use high-airflow cooling around the nozzle to cool the print. The covers simply push onto the front of the hotEnd with no disassembly - they will be a tight fit when first pushed on cold. Cooling blower Fans; DC 12V 006a~015a 50mmx15mm widely used in humidifier, aromatherapy and other small appliances series; small heat radiating communication equipment; military equipment; intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling; pc cpu server cooling dissipation and so on-Repair Replacement 2Pack Bearing.
SoundOriginal 2pcs Cooling Blower Fan DC 12V 0.10A~0.15A 50mmx15mm Fans for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement #ad - Total size : 5 x 5 x 1. 5cm /2" x 2" x 06 " l*d*h; outlet size : 2 x1. 5cm/08" x 06"l*w cable length : 25cm/9.
More information about SoundOriginal Factory 8541584670 #ad
Similar products
Gizmo Dorks PEI Sheet 8″ x 8″ 203mm x 203mm 1mm Thick 3D Printer Build Surface with 3M 468MP Adhesive, Made in The USA
Gizmo Dorks #ad - Made in the usa: single 1mm thick sheet installs quickly on top of existing flat build platforms e. G. Borosilicate glass using the 3M 468MP adhesive transfer tape. Abs and pla filaments along with many other materials print directly on to PEI surface without the need for additional adhesives, tapes, or slurry.
Remove film from both sides before using: Blue protective film guards against scratches during shipping and handling. Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results. Light sanding with 2400 grit paper will also give the PEI sheet more life. Remove the blue protective film from the PEI sheet.
Pei polyetherimide sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. Includes: 1x pei sheet, 1x full size 3m 468mp adhesive transfer tape, 5x 1" strips of 3M 468MP adhesive transfer tape. Carefully apply the 3m 468mp transfer Tape and use it to stick the PEI to the print bed.
Gizmo Dorks PEI Sheet 8" x 8" 203mm x 203mm 1mm Thick 3D Printer Build Surface with 3M 468MP Adhesive, Made in The USA #ad - How to use: cut the pEI sheet to size by scoring with a hobby knife. Abs and pla both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. The printed 3d parts will adhere to the PEI surface on a heated bed, and it will release or pop off when cooling down.
Both a sheet and strips of adhesive are included in each package.
More information about Gizmo Dorks #ad
Signstek 3D Printer MK2 MK3 Heated Bed Tempered Borosilicate Glass Plate 213x200x3mm
Signstek A011 #ad - Tempered silicon glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed. Material: Silicon glass. Get you out of the trouble when plastic film decreased viscosity after a period of usage. After cracking a few sheets of normal glass from rapidly cooling or heating, tempered glass will quell your frustrations.Size: 213mm x 200mm x 3mm package includes: 1 x Smart glass Please note: The other products show in the picture are not included! Made from tempered with high transparence. If you want to make your printing platform flat enough, ideal stuff is glass sheet. Avoid replacing plastic film. High binding power when heating, easy to separate the plastic parts when cooling.
More information about Signstek A011 #ad
Similar products
WINSINN Leveling Spring Component - M3 Screw Knob - for 3D Printer Hot Bed/Platform (Pack of 4set) #ad
uxcell 400mm x 205mm x 0.5mm Silicone Thermal Pad for CPU GPU Heatsink
uxcell a11121700ux0155 #ad - Material: Silicon glass. Weight : 103g. Used for graphics cards, graphic chips and CPU chips. The thermal pad can lower greatly CPU temperature and solve most of the laptop heatsink problem. High binding power when heating, easy to separate the plastic parts when cooling. Product name : cpu Thermal Pad;Material : Silicone.Avoid replacing plastic film. Thickness : 05mm/002''. Size : 40 x 205cm/15. 7'' x 8. 1'' l*w. Get you out of the trouble when plastic film decreased viscosity after a period of usage. Package content : 1 x CPU Thermal Pad. Made from tempered with high transparence.
More information about uxcell a11121700ux0155 #ad
Similar products
Gulfcoast Robotics Z-Brace Frame Support Kit for Wanhao Duplicator i3 and Maker Select V1, V2 and V2.1 3D Printers
Gulfcoast Robotics ZBRACE #ad - Size : 40 x 205cm/15. 7'' x 8. 1'' l*w. When you are done with adjustment - just tighten counter nuts on each rod end to get rid of any small play and you will make your adjustment permanent. Product name : cpu Thermal Pad;Material : Silicone. Weight : 103g. Made from tempered with high transparence. After you tighten counter nuts your frame will become completely solid and stable.In our kit we use ball joints to eliminate any tension created by misalignment between upper and lower bracket. Convenient feature of our kit is ability to allow fine adjustment of the each Z-rod length. Get you out of the trouble when plastic film decreased viscosity after a period of usage. Thickness : 0
Gulfcoast Robotics Z-Brace Frame Support Kit for Wanhao Duplicator i3 and Maker Select V1, V2 and V2.1 3D Printers #ad - 5mm/002''. Our kit is fully metal kit, no printed parts. Designed and manufactured by USA company. Material: Silicon glass. Cnc machined all metal design. Compatible with wanhao duplicator i3 and Maker Select V1, V2 and V2.
More information about Gulfcoast Robotics ZBRACE #ad
Similar products
BNTECHGO 14 Gauge Silicone Wire Ultra Flexible 6 feet high Temp 200 deg C 600V 14 AWG Silicone Wire 400 Strands of Tinned Copper Wire Stranded Wire Model Battery Cable Black and Red Each Color 3 ft
bntechgo.com 8541758464 #ad - Package content : 1 x CPU Thermal Pad. High binding power when heating, easy to separate the plastic parts when cooling. Designed and manufactured by USA company. Avoid replacing plastic film. Material: Silicon glass. Cnc machined all metal design. Black anodized parts will look great on your 3D Printer. Product name : cpu Thermal Pad;Material : Silicone.High quality ultra flexible soft Silicone Rubber Copper Wire!Super Low Impedance, Highly Efficient!1. High quality ultra flexible soft Silicone Rubber Copper Wire!Super Low Impedance, Highly Efficient!2. High strand count copper core, 14 AWG silicone stranded wire has 400 strands 008 mm tinned copper wire, the copper strands are tinned, protecting them from corrosion and making it easier to solder.
BNTECHGO 14 Gauge Silicone Wire Ultra Flexible 6 feet high Temp 200 deg C 600V 14 AWG Silicone Wire 400 Strands of Tinned Copper Wire Stranded Wire Model Battery Cable Black and Red Each Color 3 ft #ad - 3. They are constructed with premium silicone rubber insulation. High temperature resistance 200 degree C, Low temperature resistance, in extreme cold -60 degree C. Rated voltage: 600 volts. Outside diameter 3. 5 mm, tolerance +/- 0
More information about bntechgo.com 8541758464 #ad
Similar products
Install Bay BVST10 Spade Terminal Vinyl Connector 16/14 Gauge #10, Blue 100-Pack
Metra Electronics Corp BVST10 #ad - Get you out of the trouble when plastic film decreased viscosity after a period of usage. High strand count copper core, 14 awg silicone stranded wire has 400 strands 008 mm tinned copper wire, the copper strands are tinned, protecting them from corrosion and making it easier to solder. They are constructed with premium silicone rubber insulation.High temperature resistance 200 degree C, in extreme cold -60 degree C. Rated voltage: 600 volts. Outside diameter 3. 5 mm, low temperature resistance, tolerance +/- 01 mm. 14 gauge silicone wire kit: 2 colors, each color 3 ft, red and black, total 6 feet. Bntechgo silicone wire are widely used for model planes, meters, lamps, model ships, household appliances, electric heating appliances, model cars, batteries, instruments, motor lead wire and digital fields.
Install Bay BVST10 Spade Terminal Vinyl Connector 16/14 Gauge #10, Blue 100-Pack #ad - Spade terminal Vinyl Connector. Compatible with wanhao duplicator i3 and Maker Select V1, V2 and V2. 1 3d printers. 16/14 gauge #10 High binding power when heating, easy to separate the plastic parts when cooling. For maker select plus 3d printer please check ASIN B07B3KD5GW.
More information about Metra Electronics Corp BVST10 #ad
Similar products
Gulfcoast Robotics Thermistor Upgrade for Maker Select Plus and Wanhao Duplicator i3 Plus 3D Printers.
Gulfcoast Robotics NTC3950_CWM #ad - Avoid replacing plastic film. High quality ultra flexible soft Silicone Rubber Copper Wire!Super Low Impedance, Highly Efficient! Ntc 3950 hex thermistor features: M3x05 threaded stud to use in place of M2 clamping screw on MK10 extruder heater block. Package content : 1 x CPU Thermal Pad. High strand count copper core, 14 awg silicone stranded wire has 400 strands 008 mm tinned copper wire, the copper strands are tinned, protecting them from corrosion and making it easier to solder. They are constructed with premium silicone rubber insulation. High temperature resistance 200 degree C, in extreme cold -60 degree C. Rated voltage: 600 volts. Outside diameter 3. 5 mm, low temperature resistance, tolerance +/- 0
Gulfcoast Robotics Thermistor Upgrade for Maker Select Plus and Wanhao Duplicator i3 Plus 3D Printers. #ad - 1 mm. 14 gauge silicone wire kit: 2 colors, each color 3 ft, red and black, total 6 feet. Bntechgo silicone wire are widely used for model planes, instruments, household appliances, model cars, electric heating appliances, meters, batteries, lamps, model ships, motor lead wire and digital fields. Spade terminal Vinyl Connector.
High accuracy: 1%. Cnc machined all metal design.
More information about Gulfcoast Robotics NTC3950_CWM #ad
Similar products
Signswise 2 Pack 5mm 40T Extruder Driver Feeder Gear Bore for Makerbot Mk7 Mk8 3D Printer
Signswise #ad - Designed and manufactured by USA Company. Package content : 1 x CPU Thermal Pad. High strand count copper core, 14 awg silicone stranded wire has 400 strands 008 mm tinned copper wire, the copper strands are tinned, protecting them from corrosion and making it easier to solder. They are constructed with premium silicone rubber insulation.High temperature resistance 200 degree C, in extreme cold -60 degree C. Rated voltage: 600 volts. Outside diameter 3. 5 mm, low temperature resistance, tolerance +/- 01 mm. 14 gauge silicone wire kit: 2 colors, each color 3 ft, red and black, total 6 feet. Bntechgo silicone wire are widely used for model planes, household appliances, meters, electric heating appliances, lamps, model cars, model ships, instruments, batteries, motor lead wire and digital fields.
Signswise 2 Pack 5mm 40T Extruder Driver Feeder Gear Bore for Makerbot Mk7 Mk8 3D Printer #ad - Spade terminal Vinyl Connector. Specification material:stainless steel outer diameter:12mm Inner hole:5mm Height: 12mm The number of teeth: 40 teeth Made from tempered with high transparence. Get you out of the trouble when plastic film decreased viscosity after a period of usage. The number of teeth: 40 teeth.
Black anodized parts will look great on your 3D Printer.
More information about Signswise #ad
Similar products
3pcs MK10 Silicone Socks Instead Ceramic Insulation for Wanhao Dupicator D4/I3/Dremel i3 Makerbot 2 QIDI Tech Flashforge Silicone Heater Block Cover
Funssor #ad - Weight : 103g. High binding power when heating, easy to separate the plastic parts when cooling. Easy to mount with M3 HEX stuв. Product name : cpu Thermal Pad;Material : Silicone. If your block is the right size, and the cover work for it. Black anodized parts will look great on your 3D Printer. 16/14 gauge #10. Size : 40 x 205cm/15. 7'' x 8. 1'' l*w. Get you out of the trouble when plastic film decreased viscosity after a period of usage. Cnc machined all metal design. Can hold temperature up to 300C with ceramic glue and fiberglass insulation on leads. They don't just keep the block clean, but also keep heat inside the hotend and off your print.
3pcs MK10 Silicone Socks Instead Ceramic Insulation for Wanhao Dupicator D4/I3/Dremel i3 Makerbot 2 QIDI Tech Flashforge Silicone Heater Block Cover #ad - Helps to keep the hotend temperature extremely stable, particularly if you use high-airflow cooling around the nozzle to cool the print. The covers simply push onto the front of the hotEnd with no disassembly - they will be a tight fit when first pushed on cold. High quality ultra flexible soft Silicone Rubber Copper Wire!Super Low Impedance, Highly Efficient!
Made of a heat-resistant, non-stick silicone material our socks will repel build-up of molten plastic. Designed and manufactured by USA Company.
More information about Funssor #ad
Similar products
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black
HATCHBOX 3D PLA-1KG1.75-BLK #ad - They don't just keep the block clean, but also keep heat inside the hotend and off your print. Helps to keep the hotend temperature extremely stable, particularly if you use high-airflow cooling around the nozzle to cool the print. The covers simply push onto the front of the hotEnd with no disassembly - they will be a tight fit when first pushed on cold.For maker select plus 3d printer please check ASIN B07B3KD5GW. This really helps with sticky materials like co-polyesters and filled-composite materials that like to build up on nozzles. Very useful silicone socks: will keep your heater block clean and free from burnt and blackened plastic. Black anodized parts will look great on your 3D Printer.
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black #ad - Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F. 2 pieces makerbot mk7 mk8 extruder Driver Feeder Gear Bore 5mm 40T 3d Printer. Welcome to hatchbox 3d products our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality.
Weight : 103g. Made from tempered with high transparence. When hot the silicone will expand to the correct size to fit the hotend snugly.
More information about HATCHBOX 3D PLA-1KG1.75-BLK #ad
Similar products
SoundOriginal 2pcs Cooling Blower Fan DC 12V 0.10A~0.15A 50mmx15mm Fans for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement
SoundOriginal Factory 8541584670 #ad - This really helps with sticky materials like co-polyesters and filled-composite materials that like to build up on nozzles. Very useful silicone socks: will keep your heater block clean and free from burnt and blackened plastic. They don't just keep the block clean, but also keep heat inside the hotend and off your print.Helps to keep the hotend temperature extremely stable, particularly if you use high-airflow cooling around the nozzle to cool the print. The covers simply push onto the front of the hotEnd with no disassembly - they will be a tight fit when first pushed on cold. Cooling blower Fans; DC 12V 006a~015a 50mmx15mm widely used in humidifier, aromatherapy and other small appliances series; small heat radiating communication equipment; military equipment; intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling; pc cpu server cooling dissipation and so on-Repair Replacement 2Pack Bearing.
SoundOriginal 2pcs Cooling Blower Fan DC 12V 0.10A~0.15A 50mmx15mm Fans for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement #ad - Total size : 5 x 5 x 1. 5cm /2" x 2" x 06 " l*d*h; outlet size : 2 x1. 5cm/08" x 06"l*w cable length : 25cm/9.
More information about SoundOriginal Factory 8541584670 #ad
Similar products
ANTCLABS BLTouch : Auto Bed Leveling Sensor/To be a Premium 3D Printer (With 1M Extension Cable Set) #ad